diff options
Diffstat (limited to 'Documentation/git-checkout.txt')
| -rw-r--r-- | Documentation/git-checkout.txt | 180 |
1 files changed, 122 insertions, 58 deletions
diff --git a/Documentation/git-checkout.txt b/Documentation/git-checkout.txt index 55c9289438..37c1810e3f 100644 --- a/Documentation/git-checkout.txt +++ b/Documentation/git-checkout.txt @@ -3,55 +3,97 @@ git-checkout(1) NAME ---- -git-checkout - Checkout and switch to a branch +git-checkout - Checkout a branch or paths to the working tree SYNOPSIS -------- [verse] -'git-checkout' [-q] [-f] [-b <new_branch> [-l]] [-m] [<branch>] -'git-checkout' [<tree-ish>] <paths>... +'git checkout' [-q] [-f] [-m] [<branch>] +'git checkout' [-q] [-f] [-m] [-b <new_branch>] [<start_point>] +'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>... +'git checkout' --patch [<tree-ish>] [--] [<paths>...] DESCRIPTION ----------- When <paths> are not given, this command switches branches by -updating the index and working tree to reflect the specified -branch, <branch>, and updating HEAD to be <branch> or, if -specified, <new_branch>. Using -b will cause <new_branch> to -be created. +updating the index, working tree, and HEAD to reflect the specified +branch. -When <paths> are given, this command does *not* switch +If `-b` is given, a new branch is created and checked out, as if +linkgit:git-branch[1] were called; in this case you can +use the --track or --no-track options, which will be passed to `git +branch`. As a convenience, --track without `-b` implies branch +creation; see the description of --track below. + +When <paths> or --patch are given, this command does *not* switch branches. It updates the named paths in the working tree from -the index file (i.e. it runs `git-checkout-index -f -u`), or a -named commit. In -this case, `-f` and `-b` options are meaningless and giving -either of them results in an error. <tree-ish> argument can be +the index file, or from a named <tree-ish> (most often a commit). In +this case, the `-b` and `--track` options are meaningless and giving +either of them results in an error. The <tree-ish> argument can be used to specify a specific tree-ish (i.e. commit, tag or tree) to update the index for the given paths before updating the working tree. +The index may contain unmerged entries after a failed merge. By +default, if you try to check out such an entry from the index, the +checkout operation will fail and nothing will be checked out. +Using -f will ignore these unmerged entries. The contents from a +specific side of the merge can be checked out of the index by +using --ours or --theirs. With -m, changes made to the working tree +file can be discarded to recreate the original conflicted merge result. OPTIONS ------- -q:: - Quiet, supress feedback messages. +--quiet:: + Quiet, suppress feedback messages. -f:: - Force a re-read of everything. +--force:: + When switching branches, proceed even if the index or the + working tree differs from HEAD. This is used to throw away + local changes. ++ +When checking out paths from the index, do not fail upon unmerged +entries; instead, unmerged entries are ignored. + +--ours:: +--theirs:: + When checking out paths from the index, check out stage #2 + ('ours') or #3 ('theirs') for unmerged paths. -b:: Create a new branch named <new_branch> and start it at - <branch>. The new branch name must pass all checks defined - by gitlink:git-check-ref-format[1]. Some of these checks - may restrict the characters allowed in a branch name. + <start_point>; see linkgit:git-branch[1] for details. + +-t:: +--track:: + When creating a new branch, set up "upstream" configuration. See + "--track" in linkgit:git-branch[1] for details. ++ +If no '-b' option is given, the name of the new branch will be +derived from the remote branch. If "remotes/" or "refs/remotes/" +is prefixed it is stripped away, and then the part up to the +next slash (which would be the nickname of the remote) is removed. +This would tell us to use "hack" as the local branch when branching +off of "origin/hack" (or "remotes/origin/hack", or even +"refs/remotes/origin/hack"). If the given name has no slash, or the above +guessing results in an empty name, the guessing is aborted. You can +explicitly give a name with '-b' in such a case. + +--no-track:: + Do not set up "upstream" configuration, even if the + branch.autosetupmerge configuration variable is true. -l:: - Create the new branch's ref log. This activates recording of - all changes to made the branch ref, enabling use of date - based sha1 expressions such as "<branchname>@{yesterday}". + Create the new branch's reflog; see linkgit:git-branch[1] for + details. -m:: - If you have local modifications to one or more files that +--merge:: + When switching branches, + if you have local modifications to one or more files that are different between the current branch and the branch to which you are switching, the command refuses to switch branches in order to preserve your modifications in context. @@ -61,17 +103,51 @@ OPTIONS + When a merge conflict happens, the index entries for conflicting paths are left unmerged, and you need to resolve the conflicts -and mark the resolved paths with `git update-index`. +and mark the resolved paths with `git add` (or `git rm` if the merge +should result in deletion of the path). ++ +When checking out paths from the index, this option lets you recreate +the conflicted merge in the specified paths. -<new_branch>:: - Name for the new branch. +--conflict=<style>:: + The same as --merge option above, but changes the way the + conflicting hunks are presented, overriding the + merge.conflictstyle configuration variable. Possible values are + "merge" (default) and "diff3" (in addition to what is shown by + "merge" style, shows the original contents). + +-p:: +--patch:: + Interactively select hunks in the difference between the + <tree-ish> (or the index, if unspecified) and the working + tree. The chosen hunks are then applied in reverse to the + working tree (and if a <tree-ish> was specified, the index). ++ +This means that you can use `git checkout -p` to selectively discard +edits from your current working tree. <branch>:: - Branch to checkout; may be any object ID that resolves to a - commit. Defaults to HEAD. + Branch to checkout; if it refers to a branch (i.e., a name that, + when prepended with "refs/heads/", is a valid ref), then that + branch is checked out. Otherwise, if it refers to a valid + commit, your HEAD becomes "detached" and you are no longer on + any branch (see below for details). + -When this parameter names a non-branch (but still a valid commit object), -your HEAD becomes 'detached'. +As a special case, the `"@\{-N\}"` syntax for the N-th last branch +checks out the branch (instead of detaching). You may also specify +`-` which is synonymous with `"@\{-1\}"`. + +<new_branch>:: + Name for the new branch. + +<start_point>:: + The name of a commit at which to start the new branch; see + linkgit:git-branch[1] for details. Defaults to HEAD. + +<tree-ish>:: + Tree to checkout from (when paths are given). If not specified, + the index will be used. + Detached HEAD @@ -87,13 +163,13 @@ $ git checkout v2.6.18 ------------ Earlier versions of git did not allow this and asked you to -create a temporary branch using `-b` option, but starting from +create a temporary branch using the `-b` option, but starting from version 1.5.0, the above command 'detaches' your HEAD from the -current branch and directly point at the commit named by the tag -(`v2.6.18` in the above example). +current branch and directly points at the commit named by the tag +(`v2.6.18` in the example above). -You can use usual git commands while in this state. You can use -`git-reset --hard $othercommit` to further move around, for +You can use all git commands while in this state. You can use +`git reset --hard $othercommit` to further move around, for example. You can make changes and create a new commit on top of a detached HEAD. You can even create a merge by using `git merge $othercommit`. @@ -103,22 +179,12 @@ by any branch (which is natural --- you are not on any branch). What this means is that you can discard your temporary commits and merges by switching back to an existing branch (e.g. `git checkout master`), and a later `git prune` or `git gc` would -garbage-collect them. - -The command would refuse to switch back to make sure that you do -not discard your temporary state by mistake when your detached -HEAD is not pointed at by any existing ref. If you did want to -save your state (e.g. "I was interested in the fifth commit from -the top of 'master' branch", or "I made two commits to fix minor -bugs while on a detached HEAD" -- and if you do not want to lose -these facts), you can create a new branch and switch to it with -`git checkout -b newbranch` so that you can keep building on -that state, or tag it first so that you can come back to it -later and switch to the branch you wanted to switch to with `git -tag that_state; git checkout master`. On the other hand, if you -did want to discard the temporary state, you can give `-f` -option (e.g. `git checkout -f master`) to override this -behaviour. +garbage-collect them. If you did this by mistake, you can ask +the reflog for HEAD where you were, e.g. + +------------ +$ git log -g -2 HEAD +------------ EXAMPLES @@ -136,8 +202,8 @@ $ git checkout hello.c <3> ------------ + <1> switch branch -<2> take out a file out of other commit -<3> restore hello.c from HEAD of current branch +<2> take a file out of another commit +<3> restore hello.c from the index + If you have an unfortunate branch that is named `hello.c`, this step would be confused as an instruction to switch to that branch. @@ -147,7 +213,7 @@ You should instead write: $ git checkout -- hello.c ------------ -. After working in a wrong branch, switching to the correct +. After working in the wrong branch, switching to the correct branch would be done using: + ------------ @@ -155,7 +221,7 @@ $ git checkout mytopic ------------ + However, your "wrong" branch and correct "mytopic" branch may -differ in files that you have locally modified, in which case, +differ in files that you have modified locally, in which case the above checkout would fail like this: + ------------ @@ -181,7 +247,6 @@ the `-m` option, you would see something like this: ------------ $ git checkout -m mytopic Auto-merging frotz -merge: warning: conflicts during merge ERROR: Merge conflict in frotz fatal: merge program failed ------------ @@ -189,11 +254,11 @@ fatal: merge program failed At this point, `git diff` shows the changes cleanly merged as in the previous example, as well as the changes in the conflicted files. Edit and resolve the conflict and mark it resolved with -`git update-index` as usual: +`git add` as usual: + ------------ $ edit frotz -$ git update-index frotz +$ git add frotz ------------ @@ -207,5 +272,4 @@ Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>. GIT --- -Part of the gitlink:git[7] suite - +Part of the linkgit:git[1] suite |