user/sven/linux.git, branch stable/5.15.y

Linux 5.15.202

2026-03-04T12:37:37Z

Signed-off-by: Sasha Levin Tested-by: Hardik Garg Tested-by: Vijayendra Suman Tested-by: Jon Hunter Tested-by: Ron Economos Tested-by: Brett A C Sheffield Tested-by: Florian Fainelli Tested-by: Mark Brown

NTB: ntb_transport: Fix too small buffer for debugfs_name

2026-03-04T12:20:37Z

[ Upstream commit 6a4b50585d74fe45d3ade1e3e86ba8aae79761a5 ] The buffer used for "qp%d" was only 4 bytes, which truncates names like "qp10" to "qp1" and causes multiple queues to share the same directory. Enlarge the buffer and use sizeof() to avoid truncation. Fixes: fce8a7bb5b4b ("PCI-Express Non-Transparent Bridge Support") Cc: # v3.9+ Reviewed-by: Frank Li Reviewed-by: Dave Jiang Signed-off-by: Koichiro Den Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

net: nfc: nci: Fix parameter validation for packet data

2026-03-04T12:20:37Z

[ Upstream commit 571dcbeb8e635182bb825ae758399831805693c2 ] Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") communication with nci nfc chips is not working any more. The mentioned commit tries to fix access of uninitialized data, but failed to understand that in some cases the data packet is of variable length and can therefore not be compared to the maximum packet length given by the sizeof(struct). Fixes: 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") Cc: stable@vger.kernel.org Signed-off-by: Michael Thalmeier Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com Link: https://patch.msgid.link/20260218083000.301354-1-michael.thalmeier@hale.at Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

drm/amdgpu: keep vga memory on MacBooks with switchable graphics

2026-03-04T12:20:36Z

[ Upstream commit 096bb75e13cc508d3915b7604e356bcb12b17766 ] On Intel MacBookPros with switchable graphics, when the iGPU is enabled, the address of VRAM gets put at 0 in the dGPU's virtual address space. This is non-standard and seems to cause issues with the cursor if it ends up at 0. We have the framework to reserve memory at 0 in the address space, so enable it here if the vram start address is 0. Reviewed-and-tested-by: Mario Kleiner Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4302 Cc: stable@vger.kernel.org Cc: Mario Kleiner Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

net: ethernet: ec_bhf: Fix dma_free_coherent() dma handle

2026-03-04T12:20:36Z

[ Upstream commit ffe68c3766997d82e9ccaf1cdbd47eba269c4aa2 ] dma_free_coherent() in error path takes priv->rx_buf.alloc_len as the dma handle. This would lead to improper unmapping of the buffer. Change the dma handle to priv->rx_buf.alloc_phys. Fixes: 6af55ff52b02 ("Driver for Beckhoff CX5020 EtherCAT master module.") Cc: Signed-off-by: Thomas Fourier Link: https://patch.msgid.link/20260213164340.77272-2-fourier.thomas@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

fbdev: ffb: fix corrupted video output on Sun FFB1

2026-03-04T12:20:36Z

[ Upstream commit b28da0d092461ac239ff034a8ac3129320177ba3 ] Fix Sun FFB1 corrupted video out ([1] and [2]) by disabling overlay and initializing window mode to a known state. The issue never appeared on my FFB2+/vertical nor Elite3D/M6. It could also depend on the PROM version. /SUNW,ffb@1e,0: FFB at 000001fc00000000, type 11, DAC pnum[236c] rev[10] manuf_rev[4] X (II) /dev/fb0: Detected FFB1, Z-buffer, Single-buffered. X (II) /dev/fb0: BT9068 (PAC1) ramdac detected (with normal cursor control) X (II) /dev/fb0: Detected Creator/Creator3D [1] https://www.instagram.com/p/DUTcSmSjSem/ [2] https://chaos.social/@ReneRebe/116023241660154102 Signed-off-by: René Rebe Cc: stable@kernel.org Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: of: display_timing: fix refcount leak in of_get_display_timings()

2026-03-04T12:20:36Z

[ Upstream commit eacf9840ae1285a1ef47eb0ce16d786e542bd4d7 ] of_parse_phandle() returns a device_node with refcount incremented, which is stored in 'entry' and then copied to 'native_mode'. When the error paths at lines 184 or 192 jump to 'entryfail', native_mode's refcount is not decremented, causing a refcount leak. Fix this by changing the goto target from 'entryfail' to 'timingfail', which properly calls of_node_put(native_mode) before cleanup. Fixes: cc3f414cf2e4 ("video: add of helper for display timings/videomode") Cc: stable@vger.kernel.org Signed-off-by: Weigang He Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

fbdev: vt8500lcdfb: fix missing dma_free_coherent()

2026-03-04T12:20:36Z

[ Upstream commit 88b3b9924337336a31cefbe99a22ed09401be74a ] fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not freed if the error path is reached. Fixes: e7b995371fe1 ("video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb") Cc: Signed-off-by: Thomas Fourier Signed-off-by: Helge Deller Signed-off-by: Sasha Levin

ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()

2026-03-04T12:20:36Z

[ Upstream commit 6db8b56eed62baacaf37486e83378a72635c04cc ] On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00). Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Cc: stable@vger.kernel.org Signed-off-by: Junxi Qian Reviewed-by: Justin Iurman Link: https://patch.msgid.link/20260211040412.86195-1-qjx1298677004@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

atm: fore200e: fix use-after-free in tasklets during device removal

2026-03-04T12:20:36Z

[ Upstream commit 8930878101cd40063888a68af73b1b0f8b6c79bc ] When the PCA-200E or SBA-200E adapter is being detached, the fore200e is deallocated. However, the tx_tasklet or rx_tasklet may still be running or pending, leading to use-after-free bug when the already freed fore200e is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet(). One of the race conditions can occur as follows: CPU 0 (cleanup) | CPU 1 (tasklet) fore200e_pca_remove_one() | fore200e_interrupt() fore200e_shutdown() | tasklet_schedule() kfree(fore200e) | fore200e_tx_tasklet() | fore200e-> // UAF Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to synchronize with any pending or running tasklets. Moreover, since fore200e_reset() could prevent further interrupts or data transfers, the tasklet_kill() should be placed after fore200e_reset() to prevent the tasklet from being rescheduled in fore200e_interrupt(). Finally, it only needs to do tasklet_kill() when the fore200e state is greater than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized in earlier states. In a word, the tasklet_kill() should be placed in the FORE200E_STATE_IRQ branch within the switch...case structure. This bug was identified through static analysis. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Suggested-by: Jijie Shao Signed-off-by: Duoming Zhou Reviewed-by: Jijie Shao Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260210094537.9767-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin