user/sven/linux.git, branch v3.10.68

Linux 3.10.68

2015-02-06T14:52:56Z

target: Drop arbitrary maximum I/O size limit

2015-02-06T06:35:41Z

commit 046ba64285a4389ae5e9a7dfa253c6bff3d7c341 upstream. This patch drops the arbitrary maximum I/O size limit in sbc_parse_cdb(), which currently for fabric_max_sectors is hardcoded to 8192 (4 MB for 512 byte sector devices), and for hw_max_sectors is a backend driver dependent value. This limit is problematic because Linux initiators have only recently started to honor block limits MAXIMUM TRANSFER LENGTH, and other non-Linux based initiators (eg: MSFT Fibre Channel) can also generate I/Os larger than 4 MB in size. Currently when this happens, the following message will appear on the target resulting in I/Os being returned with non recoverable status: SCSI OP 28h with too big sectors 16384 exceeds fabric_max_sectors: 8192 Instead, drop both [fabric,hw]_max_sector checks in sbc_parse_cdb(), and convert the existing hw_max_sectors into a purely informational attribute used to represent the granuality that backend driver and/or subsystem code is splitting I/Os upon. Also, update FILEIO with an explicit FD_MAX_BYTES check in fd_execute_rw() to deal with the one special iovec limitiation case. v2 changes: - Drop hw_max_sectors check in sbc_parse_cdb() Reported-by: Lance Gropper Reported-by: Stefan Priebe Cc: Christoph Hellwig Cc: Martin K. Petersen Cc: Roland Dreier Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iser-target: Fix implicit termination of connections

2015-02-06T06:35:41Z

commit b02efbfc9a051b41e71fe8f94ddf967260e024a6 upstream. In situations such as bond failover, The new session establishment implicitly invokes the termination of the old connection. So, we don't want to wait for the old connection wait_conn to completely terminate before we accept the new connection and post a login response. The solution is to deffer the comp_wait completion and the conn_put to a work so wait_conn will effectively be non-blocking (flush errors are assumed to come very fast). We allocate isert_release_wq with WQ_UNBOUND and WQ_UNBOUND_MAX_ACTIVE to spread the concurrency of release works. Reported-by: Slava Shwartsman Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iser-target: Handle ADDR_CHANGE event for listener cm_id

2015-02-06T06:35:41Z

commit ca6c1d82d12d8013fb75ce015900d62b9754623c upstream. The np listener cm_id will also get ADDR_CHANGE event upcall (in case it is bound to a specific IP). Handle it correctly by creating a new cm_id and implicitly destroy the old one. Since this is the second event a listener np cm_id may encounter, we move the np cm_id event handling to a routine. Squashed: iser-target: Move cma_id setup to a function Reported-by: Slava Shwartsman Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iser-target: Fix connected_handler + teardown flow race

2015-02-06T06:35:41Z

commit 19e2090fb246ca21b3e569ead51a6a7a1748eadd upstream. Take isert_conn pointer from cm_id->qp->qp_context. This will allow us to know that the cm_id context is always the network portal. This will make the cm_id event check (connection or network portal) more reliable. In order to avoid a NULL dereference in cma_id->qp->qp_context we destroy the qp after we destroy the cm_id (and make the dereference safe). session stablishment/teardown sequences can happen in parallel, we should take into account that connected_handler might race with connection teardown flow. Also, protect isert_conn->conn_device->active_qps decrement within the error patch during QP creation failure and the normal teardown path in isert_connect_release(). Squashed: iser-target: Decrement completion context active_qps in error flow Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iser-target: Parallelize CM connection establishment

2015-02-06T06:35:41Z

commit 2371e5da8cfe91443339b54444dec6254fdd6dfc upstream. There is no point in accepting a new CM request only when we are completely done with the last iscsi login. Instead we accept immediately, this will also cause the CM connection to reach connected state and the initiator is allowed to send the first login. We mark that we got the initial login and let iscsi layer pick it up when it gets there. This reduces the parallel login sequence by a factor of more then 4 (and more for multi-login) and also prevents the initiator (who does all logins in parallel) from giving up on login timeout expiration. In order to support multiple login requests sequence (CHAP) we call isert_rx_login_req from isert_rx_completion insead of letting isert_get_login_rx call it. Squashed: iser-target: Use kref_get_unless_zero in connected_handler iser-target: Acquire conn_mutex when changing connection state iser-target: Reject connect request in failure path Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iser-target: Fix flush + disconnect completion handling

2015-02-06T06:35:41Z

commit 128e9cc84566a84146baea2335b3824288eed817 upstream. ISER_CONN_UP state is not sufficient to know if we should wait for completion of flush errors and disconnected_handler event. Instead, split it to 2 states: - ISER_CONN_UP: Got to CM connected phase, This state indicates that we need to wait for a CM disconnect event before going to teardown. - ISER_CONN_FULL_FEATURE: Got to full feature phase after we posted login response, This state indicates that we posted recv buffers and we need to wait for flush completions before going to teardown. Also avoid deffering disconnected handler to a work, and handle it within disconnected handler. More work here is needed to handle DEVICE_REMOVAL event correctly (cleanup all resources). Squashed: iser-target: Don't deffer disconnected handler to a work Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

iscsi,iser-target: Initiate termination only once

2015-02-06T06:35:41Z

commit 954f23722b5753305be490330cf2680b7a25f4a3 upstream. Since commit 0fc4ea701fcf ("Target/iser: Don't put isert_conn inside disconnected handler") we put the conn kref in isert_wait_conn, so we need .wait_conn to be invoked also in the error path. Introduce call to isert_conn_terminate (called under lock) which transitions the connection state to TERMINATING and calls rdma_disconnect. If the state is already teminating, just bail out back (temination started). Also, make sure to destroy the connection when getting a connect error event if didn't get to connected (state UP). Same for the handling of REJECTED and UNREACHABLE cma events. Squashed: iscsi-target: Add call to wait_conn in establishment error flow Reported-by: Slava Shwartsman Signed-off-by: Sagi Grimberg Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

vhost-scsi: Add missing virtio-scsi -> TCM attribute conversion

2015-02-06T06:35:40Z

commit 46243860806bdc2756f3ce8ac86b4d7c616bcd6c upstream. While looking at hch's recent conversion to drop the MSG_*_TAG definitions, I noticed a long standing bug in vhost-scsi where the VIRTIO_SCSI_S_* attribute definitions where incorrectly being passed directly into target_submit_cmd_map_sgls(). This patch adds the missing virtio-scsi to TCM/SAM task attribute conversion. Cc: Christoph Hellwig Cc: Michael S. Tsirkin Cc: Paolo Bonzini Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman

tcm_loop: Fix wrong I_T nexus association

2015-02-06T06:35:40Z

commit 506787a2c7daed45f0a213674ca706cbc83a9089 upstream. tcm_loop has the I_T nexus associated with the HBA. This causes commands to become misdirected if the HBA has more than one target portal group; any command is then being sent to the first target portal group instead of the correct one. The nexus needs to be associated with the target portal group instead. Signed-off-by: Hannes Reinecke Signed-off-by: Nicholas Bellinger Signed-off-by: Greg Kroah-Hartman