user/sven/linux.git, branch v3.15.1

Linux 3.15.1

2014-06-16T20:44:27Z

ahci: add PCI ID for Marvell 88SE91A0 SATA Controller

2014-06-16T20:44:10Z

commit 754a292fe6b08196cb135c03b404444e17de520a upstream. Add support for Marvell Technology Group Ltd. 88SE91A0 SATA 6Gb/s Controller by adding its PCI ID. Signed-off-by: Andreas Schrägle Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ahci: Add Device ID for HighPoint RocketRaid 642L

2014-06-16T20:44:09Z

commit d251836508fb26cd1a22b41381739835ee23728d upstream. This device normally comes with a proprietary driver, using a web GUI to configure RAID: http://www.highpoint-tech.com/USA_new/series_rr600-download.htm But thankfully it also works out of the box with the AHCI driver, being just a Marvell 88SE9235. Devices 640L, 644L, 644LS should also be supported but not tested here. Signed-off-by: Jérôme Carretero Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

rtl28xxu: add [1b80:d3af] Sveon STV27

2014-06-16T20:44:09Z

commit 74a86272f05c3dae40f2d7b17ff09a0608cf3304 upstream. Added support for Sveon STV27 device (rtl2832u + FC0013 tuner) Signed-off-by: Alessandro Miceli Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

rtl28xxu: add [1b80:d39d] Sveon STV20

2014-06-16T20:44:09Z

commit f27f5b0ee4967babfb8b03511f5e76b79d781014 upstream. Added Sveon STV20 device based on Realtek RTL2832U and FC0012 tuner Signed-off-by: Alessandro Miceli Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

rtl28xxu: add 1b80:d395 Peak DVB-T USB

2014-06-16T20:44:09Z

commit 9ca24ae4083665bda38da45f4b5dc9bbaf936bc0 upstream. Add USB ID for Peak DVB-T USB. [crope@iki.fi: fix Brian email address and indentation] Signed-off-by: Brian Healy Signed-off-by: Antti Palosaari Signed-off-by: Greg Kroah-Hartman Signed-off-by: Mauro Carvalho Chehab

mei: me: read H_CSR after asserting reset

2014-06-16T20:44:09Z

commit c40765d919d25d2d44d99c4ce39e48808f137e1e upstream. According the spec the host should read H_CSR again after asserting reset H_RST to ensure that reset was read by the firmware Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman

mei: me: drop harmful wait optimization

2014-06-16T20:44:09Z

commit 07cd7be3d92eeeae1f92a017f2cfe4fdd9256526 upstream. It my take time till ME_RDY will be cleared after the reset, so we cannot check the bit before we got the interrupt Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman

mei: me: fix hw ready reset flow

2014-06-16T20:44:09Z

commit b04ada92ffaabb868497a1fce8e4f6bf74e5488f upstream. We cleared H_RST for H_CSR on spurious interrupt generated when ME_RDY while cleared and not while ME_RDY is set. The spurious interrupt is not delivered on all platforms in this case the driver may fail to initialize. Signed-off-by: Tomas Winkler Signed-off-by: Alexander Usyskin Signed-off-by: Greg Kroah-Hartman

PCI/MSI: Fix memory leak in free_msi_irqs()

2014-06-16T20:44:09Z

commit b701c0b1fe819a2083fc6ec5332e0e4492b9516d upstream. free_msi_irqs() is leaking memory, since list_for_each_entry(entry, &dev->msi_list, list) {...} is never executed, because dev->msi_list is made empty by the loop just above this one. Fix it by relying on zero termination of attribute array like populate_msi_sysfs() does. Fixes: 1c51b50c2995 ("PCI/MSI: Export MSI mode using attributes, not kobjects") Signed-off-by: Alexei Starovoitov Signed-off-by: Bjorn Helgaas Acked-by: Neil Horman Acked-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman