user/sven/linux.git, branch v3.18.66

Linux 3.18.66

2017-08-16T20:35:42Z

pinctrl: samsung: Remove bogus irq_[un]mask from resource management

2017-08-16T20:35:32Z

commit 3fa53ec2ed885b0aec3f0472e3b4a8a6f1cd748c upstream. The irq chip callbacks irq_request/release_resources() have absolutely no business with masking and unmasking the irq. The core code unmasks the interrupt after complete setup and masks it before invoking irq_release_resources(). The unmask is actually harmful as it happens before the interrupt is completely initialized in __setup_irq(). Remove it. Fixes: f6a8249f9e55 ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs") Signed-off-by: Thomas Gleixner Cc: Krzysztof Kozlowski Cc: Sylwester Nawrocki Cc: Linus Walleij Cc: Kukjin Kim Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Acked-by: Tomasz Figa Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: sunxi: add a missing function of A10/A20 pinctrl driver

2017-08-16T20:35:32Z

commit d81ece747d8727bb8b1cfc9a20dbe62f09a4e35a upstream. The PH16 pin has a function with mux id 0x5, which is the DET pin of the "sim" (smart card reader) IP block. This function is missing in old versions of A10/A20 SoCs' datasheets and user manuals, so it's also missing in the old drivers. The newest A10 Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and it's discovered during implementing R40 pinctrl driver. Add it to the driver. As we now merged A20 pinctrl driver to the A10 one, we need to only fix the A10 driver now. Fixes: f2821b1ca3a2 ("pinctrl: sunxi: Move Allwinner A10 pinctrl driver to a driver of its own") Signed-off-by: Icenowy Zheng Reviewed-by: Chen-Yu Tsai Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pnfs/blocklayout: require 64-bit sector_t

2017-08-16T20:35:32Z

commit 8a9d6e964d318533ba3d2901ce153ba317c99a89 upstream. The blocklayout code does not compile cleanly for a 32-bit sector_t, and also has no reliable checks for devices sizes, which makes it unsafe to use with a kernel that doesn't support large block devices. Signed-off-by: Christoph Hellwig Reported-by: Arnd Bergmann Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing") Signed-off-by: Anna Schumaker Signed-off-by: Greg Kroah-Hartman

iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits

2017-08-16T20:35:31Z

commit d466d3c1217406b14b834335b5b4b33c0d45bd09 upstream. In order to select the alternate voltage reference pair (VALTH/VALTL), the right value for the REFSEL field in the ADCx_CFG register is "01", leading to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1]. [1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf Fixes: a775427632fd ("iio:adc:imx: add Freescale Vybrid vf610 adc driver") Signed-off-by: Stefan-Gabriel Mirea Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume

2017-08-16T20:35:31Z

commit e788787ef4f9c24aafefc480a8da5f92b914e5e6 upstream. Certain HP keyboards would keep inputting a character automatically which is the wake-up key after S3 resume On some AMD platforms USB host fails to respond (by holding resume-K) to USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures that resume is signaled for at least 20 ms (TDRSMDN), which is defined in USB 2.0 spec. The result is that the keyboard is out of function. In SNPS USB design, the host responds to the resume request only after system gets back to S0 and the host gets to functional after the internal HW restore operation that is more than 1 second after the initial resume request from the USB device. As a workaround for specific keyboard ID(HP Keyboards), applying port reset after resume when the keyboard is plugged in. Signed-off-by: Sandeep Singh Signed-off-by: Shyam Sundar S K cc: Nehal Shah Reviewed-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter

2017-08-16T20:35:31Z

commit 7496cfe5431f21da5d27a8388c326397e3f0a5db upstream. Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to connect to Realtek r8153. The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk can make it work. Since another r8153 dongle at my hand does not have the issue, so add the quirk to the Genesys Logic hub instead. Signed-off-by: Kai-Heng Feng Signed-off-by: Greg Kroah-Hartman

USB: Check for dropped connection before switching to full speed

2017-08-16T20:35:31Z

commit 94c43b9897abf4ea366ed4dba027494e080c7050 upstream. Some buggy USB disk adapters disconnect and reconnect multiple times during the enumeration procedure. This may lead to a device connecting at full speed instead of high speed, because when the USB stack sees that a device isn't able to enumerate at high speed, it tries to hand the connection over to a full-speed companion controller. The logic for doing this is careful to check that the device is still connected. But this check is inadequate if the device disconnects and reconnects before the check is done. The symptom is that a device works, but much more slowly than it is capable of operating. The situation was made worse recently by commit 22547c4cc4fe ("usb: hub: Wait for connection to be reestablished after port reset"), which increases the delay following a reset before a disconnect is recognized, thus giving the device more time to reconnect. This patch makes the check more robust. If the device was disconnected at any time during enumeration, we will now skip the full-speed handover. Signed-off-by: Alan Stern Reported-and-tested-by: Zdenek Kabelac Reviewed-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069

2017-08-16T20:35:31Z

commit 89f23d51defcb94a5026d4b5da13faf4e1150a6f upstream. Similar to commit d595259fbb7a ("usb-storage: Add ignore-residue quirk for Initio INIC-3619") for INIC-3169 in unusual_devs.h but INIC-3069 already present in unusual_uas.h. Both in same controller IC family. Issue is that MakeMKV fails during key exchange with installed bluray drive with following error: 002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:0' Signed-off-by: Alan Swanson Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

iio: light: tsl2563: use correct event code

2017-08-16T20:35:31Z

commit a3507e48d3f99a93a3056a34a5365f310434570f upstream. The TSL2563 driver provides three iio channels, two of which are raw ADC channels (channel 0 and channel 1) in the device and the remaining one is calculated by the two. The ADC channel 0 only supports programmable interrupt with threshold settings and this driver supports the event but the generated event code does not contain the corresponding iio channel type. This is going to change userspace ABI. Hopefully fixing this to be what it should always have been won't break any userspace code. Cc: Jonathan Cameron Signed-off-by: Akinobu Mita Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman