user/sven/linux.git, branch v3.2.6

Linux 3.2.6

2012-02-13T19:17:29Z

powernow-k8: Fix indexing issue

2012-02-13T19:17:04Z

commit a8eb28480e9b637cc78b9aa5e08612ba97e1317a upstream. The driver uses the pstate number from the status register as index in its table of ACPI pstates (powernow_table). This is wrong as this is not a 1-to-1 mapping. For example we can have _PSS information to just utilize Pstate 0 and Pstate 4, ie. powernow-k8: Core Performance Boosting: on. powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 4 (1400 MHz) In this example the driver's powernow_table has just 2 entries. Using the pstate number (4) as index into this table is just plain wrong. Signed-off-by: Andreas Herrmann Signed-off-by: Dave Jones Signed-off-by: Greg Kroah-Hartman

powernow-k8: Avoid Pstate MSR accesses on systems supporting CPB

2012-02-13T19:17:04Z

commit 201bf0f129e1715a33568d1563d9a75b840ab4d3 upstream. Due to CPB we can't directly map SW Pstates to Pstate MSRs. Get rid of the paranoia check. (assuming that the ACPI Pstate information is correct.) Signed-off-by: Andreas Herrmann Signed-off-by: Dave Jones Signed-off-by: Greg Kroah-Hartman

mmc: cb710 core: Add missing spin_lock_init for irq_lock of struct cb710_chip

2012-02-13T19:17:04Z

commit b5266ea675c5a041e2852c7ccec4cf2d4f5e0cf4 upstream. Signed-off-by: Axel Lin Acked-by: Michał Mirosław Signed-off-by: Greg Kroah-Hartman

zcache: fix deadlock condition

2012-02-13T19:17:04Z

commit 9256a4789be3dae37d00924c03546ba7958ea5a3 upstream. I discovered this deadlock condition awhile ago working on RAMster but it affects zcache as well. The list spinlock must be locked prior to the page spinlock and released after. As a result, the page copy must also be done while the locks are held. Applies to 3.2. Konrad, please push (via GregKH?)... this is definitely a bug fix so need not be pushed during a -rc0 window. Signed-off-by: Dan Magenheimer Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman

zcache: Set SWIZ_BITS to 8 to reduce tmem bucket lock contention.

2012-02-13T19:17:04Z

commit e8b4553457e78bcff90f70a31212a40a8fd4f0db upstream. SWIZ_BITS > 8 results in a much larger number of "tmem_obj" allocations, likely one per page-placed-in-frontswap. The tmem_obj is not huge (roughly 100 bytes), but it is large enough to add a not-insignificant memory overhead to zcache. The SWIZ_BITS=8 will get roughly the same lock contention without the space wastage. The effect of SWIZ_BITS can be thought of as "2^SWIZ_BITS is the number of unique oids that be generated" (This concept is limited to frontswap's use of tmem). Acked-by: Seth Jennings Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman

USB: add new zte 3g-dongle's pid to option.c

2012-02-13T19:17:04Z

commit 1608ea5f4b5d6262cd6e808839491cfb2a67405a upstream. As ZTE have and will use more pid for new products this year, so we need to add some new zte 3g-dongle's pid on option.c , and delete one pid 0x0154 because it use for mass-storage port. Signed-off-by: Rui li Signed-off-by: Greg Kroah-Hartman

USB: usbserial: add new PID number (0xa951) to the ftdi driver

2012-02-13T19:17:03Z

commit 90451e6973a5da155c6f315a409ca0a8d3ce6b76 upstream. Signed-off-by: Milan Kocian Signed-off-by: Greg Kroah-Hartman

usb: Skip PCI USB quirk handling for Netlogic XLP

2012-02-13T19:17:03Z

commit e4436a7c17ac2b5e138f93f83a541cba9b311685 upstream. The Netlogic XLP SoC's on-chip USB controller appears as a PCI USB device, but does not need the EHCI/OHCI handoff done in usb/host/pci-quirks.c. The pci-quirks.c is enabled for all vendors and devices, and is enabled if USB and PCI are configured. If we do not skip the qurik handling on XLP, the readb() call in ehci_bios_handoff() will cause a crash since byte access is not supported for EHCI registers in XLP. Signed-off-by: Jayachandran C Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: gadget: zero: fix bug in loopback autoresume handling

2012-02-13T19:17:03Z

commit 683da59d7b8ae04891636d4b59893cd4e9b0b7e5 upstream. ab943a2e125b (USB: gadget: gadget zero uses new suspend/resume hooks) introduced a copy-paste error where f_loopback.c writes to a variable declared in f_sourcesink.c. This prevents one from creating gadgets that only have a loopback function. Signed-off-by: Timo Juhani Lindfors Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman