user/sven/linux.git, branch v4.14.102

Linux 4.14.102

2019-02-20T09:20:56Z

uapi/if_ether.h: move __UAPI_DEF_ETHHDR libc define

2019-02-20T09:20:55Z

commit da360299b6734135a5f66d7db458dcc7801c826a upstream. This fixes a compile problem of some user space applications by not including linux/libc-compat.h in uapi/if_ether.h. linux/libc-compat.h checks which "features" the header files, included from the libc, provide to make the Linux kernel uapi header files only provide no conflicting structures and enums. If a user application mixes kernel headers and libc headers it could happen that linux/libc-compat.h gets included too early where not all other libc headers are included yet. Then the linux/libc-compat.h would not prevent all the redefinitions and we run into compile problems. This patch removes the include of linux/libc-compat.h from uapi/if_ether.h to fix the recently introduced case, but not all as this is more or less impossible. It is no problem to do the check directly in the if_ether.h file and not in libc-compat.h as this does not need any fancy glibc header detection as glibc never provided struct ethhdr and should define __UAPI_DEF_ETHHDR by them self when they will provide this. The following test program did not compile correctly any more: #include #include #include int main(void) { return 0; } Fixes: 6926e041a892 ("uapi/if_ether.h: prevent redefinition of struct ethhdr") Reported-by: Guillaume Nault Cc: # 4.15 Signed-off-by: Hauke Mehrtens Signed-off-by: David S. Miller Cc: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

pinctrl: msm: fix gpio-hog related boot issues

2019-02-20T09:20:55Z

commit a86caa9ba5d70696ceb35d1d39caa20d8b641387 upstream. Sven Eckelmann reported an issue with the current IPQ4019 pinctrl. Setting up any gpio-hog in the device-tree for his device would "kill the bootup completely": | [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe | [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517 | [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register | [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip | [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri This was also verified on a RT-AC58U (IPQ4018) which would no longer boot, if a gpio-hog was specified. (Tried forcing the USB LED PIN (GPIO0) to high.). The problem is that Pinctrl+GPIO registration is currently peformed in the following order in pinctrl-msm.c: 1. pinctrl_register() 2. gpiochip_add() 3. gpiochip_add_pin_range() The actual error code -517 == -EPROBE_DEFER is coming from pinctrl_get_device_gpio_range(), which is called through: gpiochip_add of_gpiochip_add of_gpiochip_scan_gpios gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request gpiochip_generic_request pinctrl_gpio_request pinctrl_get_device_gpio_range pinctrl_get_device_gpio_range() is unable to find any valid pin ranges, since nothing has been added to the pinctrldev_list yet. so the range can't be found, and the operation fails with -EPROBE_DEFER. This patch fixes the issue by adding the "gpio-ranges" property to the pinctrl device node of all upstream Qcom SoC. The pin ranges are then added by the gpio core. In order to remain compatible with older, existing DTs (and ACPI) a check for the "gpio-ranges" property has been added to msm_gpio_init(). This prevents the driver of adding the same entry to the pinctrldev_list twice. Reported-by: Sven Eckelmann Tested-by: Sven Eckelmann [ipq4019] Reviewed-by: Bjorn Andersson Signed-off-by: Christian Lamparter Signed-off-by: Linus Walleij Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

futex: Cure exit race

2019-02-20T09:20:55Z

commit da791a667536bf8322042e38ca85d55a78d3c273 upstream. Stefan reported, that the glibc tst-robustpi4 test case fails occasionally. That case creates the following race between sys_exit() and sys_futex_lock_pi(): CPU0 CPU1 sys_exit() sys_futex() do_exit() futex_lock_pi() exit_signals(tsk) No waiters: tsk->flags |= PF_EXITING; *uaddr == 0x00000PID mm_release(tsk) Set waiter bit exit_robust_list(tsk) { *uaddr = 0x80000PID; Set owner died attach_to_pi_owner() { *uaddr = 0xC0000000; tsk = get_task(PID); } if (!tsk->flags & PF_EXITING) { ... attach(); tsk->flags |= PF_EXITPIDONE; } else { if (!(tsk->flags & PF_EXITPIDONE)) return -EAGAIN; return -ESRCH; <--- FAIL } ESRCH is returned all the way to user space, which triggers the glibc test case assert. Returning ESRCH unconditionally is wrong here because the user space value has been changed by the exiting task to 0xC0000000, i.e. the FUTEX_OWNER_DIED bit is set and the futex PID value has been cleared. This is a valid state and the kernel has to handle it, i.e. taking the futex. Cure it by rereading the user space value when PF_EXITING and PF_EXITPIDONE is set in the task which 'owns' the futex. If the value has changed, let the kernel retry the operation, which includes all regular sanity checks and correctly handles the FUTEX_OWNER_DIED case. If it hasn't changed, then return ESRCH as there is no way to distinguish this case from malfunctioning user space. This happens when the exiting task did not have a robust list, the robust list was corrupted or the user space value in the futex was simply bogus. Reported-by: Stefan Liebler Signed-off-by: Thomas Gleixner Acked-by: Peter Zijlstra Cc: Heiko Carstens Cc: Darren Hart Cc: Ingo Molnar Cc: Sasha Levin Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=200467 Link: https://lkml.kernel.org/r/20181210152311.986181245@linutronix.de Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

sched, trace: Fix prev_state output in sched_switch tracepoint

2019-02-20T09:20:55Z

commit 3054426dc68e5d63aa6a6e9b91ac4ec78e3f3805 upstream. commit 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout") tried to fix the problem introduced by a previous commit efb40f588b43 ("sched/tracing: Fix trace_sched_switch task-state printing"). However the prev_state output in sched_switch is still broken. task_state_index() uses fls() which considers the LSB as 1. Left shifting 1 by this value gives an incorrect mapping to the task state. Fix this by decrementing the value returned by __get_task_state() before shifting. Link: http://lkml.kernel.org/r/1540882473-1103-1-git-send-email-pkondeti@codeaurora.org Cc: stable@vger.kernel.org Fixes: 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout") Signed-off-by: Pavankumar Kondeti Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

drm/i915: Prevent a race during I915_GEM_MMAP ioctl with WC set

2019-02-20T09:20:55Z

commit 2e7bd10e05afb866b5fb13eda25095c35d7a27cc upstream. Make sure the underlying VMA in the process address space is the same as it was during vm_mmap to avoid applying WC to wrong VMA. A more long-term solution would be to have vm_mmap_locked variant in linux/mmap.h for when caller wants to hold mmap_sem for an extended duration. v2: - Refactor the compare function Fixes: 1816f9236303 ("drm/i915: Support creation of unbound wc user mappings for objects") Reported-by: Adam Zabrocki Suggested-by: Linus Torvalds Signed-off-by: Joonas Lahtinen Cc: # v4.0+ Cc: Akash Goel Cc: Chris Wilson Cc: Tvrtko Ursulin Cc: Adam Zabrocki Reviewed-by: Chris Wilson Reviewed-by: Tvrtko Ursulin #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 5c4604e757ba9b193b09768d75a7d2105a5b883f) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman

dm thin: fix bug where bio that overwrites thin block ignores FUA

2019-02-20T09:20:54Z

commit 4ae280b4ee3463fa57bbe6eede26b97daff8a0f1 upstream. When provisioning a new data block for a virtual block, either because the block was previously unallocated or because we are breaking sharing, if the whole block of data is being overwritten the bio that triggered the provisioning is issued immediately, skipping copying or zeroing of the data block. When this bio completes the new mapping is inserted in to the pool's metadata by process_prepared_mapping(), where the bio completion is signaled to the upper layers. This completion is signaled without first committing the metadata. If the bio in question has the REQ_FUA flag set and the system crashes right after its completion and before the next metadata commit, then the write is lost despite the REQ_FUA flag requiring that I/O completion for this request must only be signaled after the data has been committed to non-volatile storage. Fix this by deferring the completion of overwrite bios, with the REQ_FUA flag set, until after the metadata has been committed. Cc: stable@vger.kernel.org Signed-off-by: Nikos Tsironis Acked-by: Joe Thornber Acked-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm crypt: don't overallocate the integrity tag space

2019-02-20T09:20:54Z

commit ff0c129d3b5ecb3df7c8f5e2236582bf745b6c5f upstream. bio_sectors() returns the value in the units of 512-byte sectors (no matter what the real sector size of the device). dm-crypt multiplies bio_sectors() by on_disk_tag_size to calculate the space allocated for integrity tags. If dm-crypt is running with sector size larger than 512b, it allocates more data than is needed. Device Mapper trims the extra space when passing the bio to dm-integrity, so this bug didn't result in any visible misbehavior. But it must be fixed to avoid wasteful memory allocation for the block integrity payload. Fixes: ef43aa38063a6 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # 4.12+ Reported-by: Milan Broz Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

x86/a.out: Clear the dump structure initially

2019-02-20T09:20:54Z

commit 10970e1b4be9c74fce8ab6e3c34a7d718f063f2c upstream. dump_thread32() in aout_core_dump() does not clear the user32 structure allocated on the stack as the first thing on function entry. As a result, the dump.u_comm, dump.u_ar0 and dump.signal which get assigned before the clearing, get overwritten. Rename that function to fill_dump() to make it clear what it does and call it first thing. This was caught while staring at a patch by Derek Robson . Signed-off-by: Borislav Petkov Cc: Derek Robson Cc: Linus Torvalds Cc: Michael Matz Cc: x86@kernel.org Cc: Link: https://lkml.kernel.org/r/20190202005512.3144-1-robsonde@gmail.com Signed-off-by: Greg Kroah-Hartman

md/raid1: don't clear bitmap bits on interrupted recovery.

2019-02-20T09:20:54Z

commit dfcc34c99f3ebc16b787b118763bf9cb6b1efc7a upstream. sync_request_write no longer submits writes to a Faulty device. This has the unfortunate side effect that bitmap bits can be incorrectly cleared if a recovery is interrupted (previously, end_sync_write would have prevented this). This means the next recovery may not copy everything it should, potentially corrupting data. Add a function for doing the proper md_bitmap_end_sync, called from end_sync_write and the Faulty case in sync_request_write. backport note to 4.14: s/md_bitmap_end_sync/bitmap_end_sync Cc: stable@vger.kernel.org 4.14+ Fixes: 0c9d5b127f69 ("md/raid1: avoid reusing a resync bio after error handling.") Reviewed-by: Jack Wang Tested-by: Jack Wang Signed-off-by: Nate Dailey Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman