user/sven/linux.git, branch v4.14.262

Linux 4.14.262

2022-01-11T12:57:38Z

Link: https://lore.kernel.org/r/20220110071814.261471354@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman

mISDN: change function names to avoid conflicts

2022-01-11T12:57:38Z

[ Upstream commit 8b5fdfc57cc2471179d1c51081424ded833c16c8 ] As we build for mips, we meet following error. l1_init error with multiple definition. Some architecture devices usually marked with l1, l2, lxx as the start-up phase. so we change the mISDN function names, align with Isdnl2_xxx. mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init': (.text+0x890): multiple definition of `l1_init'; \ arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1 Signed-off-by: wolfgang huang Reported-by: k2ci Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: udp: fix alignment problem in udp4_seq_show()

2022-01-11T12:57:38Z

[ Upstream commit 6c25449e1a32c594d743df8e8258e8ef870b6a77 ] $ cat /pro/net/udp before: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 after: sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000 Signed-off-by: yangxingwu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate

2022-01-11T12:57:38Z

[ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ] The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

scsi: libiscsi: Fix UAF in iscsi_conn_get_param()/iscsi_conn_teardown()

2022-01-11T12:57:37Z

[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ] |- iscsi_if_destroy_conn |-dev_attr_show |-iscsi_conn_teardown |-spin_lock_bh |-iscsi_sw_tcp_conn_get_param |-kfree(conn->persistent_address) |-iscsi_conn_get_param |-kfree(conn->local_ipaddr) ==>|-read persistent_address ==>|-read local_ipaddr |-spin_unlock_bh When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a UAF may be triggered. Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com Reported-by: Lu Tixiong Reviewed-by: Mike Christie Reviewed-by: Lee Duncan Signed-off-by: Lixiaokeng Signed-off-by: Linfeilong Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

ipv6: Do cleanup if attribute validation fails in multipath route

2022-01-11T12:57:37Z

[ Upstream commit 95bdba23b5b4aa75fe3e6c84335e638641c707bb ] As Nicolas noted, if gateway validation fails walking the multipath attribute the code should jump to the cleanup to free previously allocated memory. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern Acked-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220103170555.94638-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

ipv6: Continue processing multipath route even if gateway attribute is invalid

2022-01-11T12:57:37Z

[ Upstream commit e30a845b0376eb51c9c94f56bbd53b2e08ba822f ] ip6_route_multipath_del loop continues processing the multipath attribute even if delete of a nexthop path fails. For consistency, do the same if the gateway attribute is invalid. Fixes: 1ff15a710a86 ("ipv6: Check attribute length for RTA_GATEWAY when deleting multipath route") Signed-off-by: David Ahern Acked-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20220103171911.94739-1-dsahern@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

phonet: refcount leak in pep_sock_accep

2022-01-11T12:57:37Z

commit bcd0f93353326954817a4f9fa55ec57fb38acbb0 upstream. sock_hold(sk) is invoked in pep_sock_accept(), but __sock_put(sk) is not invoked in subsequent failure branches(pep_accept_conn() != 0). Signed-off-by: Hangyu Hua Link: https://lore.kernel.org/r/20211209082839.33985-1-hbh25y@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Aayush Agarwal Signed-off-by: Greg Kroah-Hartman

rndis_host: support Hytera digital radios

2022-01-11T12:57:37Z

commit 29262e1f773b4b6a43711120be564c57fca07cfb upstream. Hytera makes a range of digital (DMR) radios. These radios can be programmed to a allow a computer to control them over Ethernet over USB, either using NCM or RNDIS. This commit adds support for RNDIS for Hytera radios. I tested with a Hytera PD785 and a Hytera MD785G. When these radios are programmed to set up a Radio to PC Network using RNDIS, an USB interface will be added with class 2 (Communications), subclass 2 (Abstract Modem Control) and an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT RNDIS?"). This patch is similar to the solution of this StackOverflow user, but that only works for the Hytera MD785: https://stackoverflow.com/a/53550858 To use the "Radio to PC Network" functionality of Hytera DMR radios, the radios need to be programmed correctly in CPS (Hytera's Customer Programming Software). "Forward to PC" should be checked in "Network" (under "General Setting" in "Conventional") and the "USB Network Communication Protocol" should be set to RNDIS. Signed-off-by: Thomas Toye Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

power: reset: ltc2952: Fix use of floating point literals

2022-01-11T12:57:36Z

commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream. A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this). drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->trigger_delay = ktime_set(2, 500L*1E6L); ^ 3 errors generated. This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'. There is no visible reason for floating point values in this driver, as the values are only assigned to integer types. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error. Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1497 Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman