user/sven/linux.git, branch v4.14.280

Linux 4.14.280

2022-05-18T07:18:09Z

Link: https://lore.kernel.org/r/20220516193614.678319286@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()

2022-05-18T07:18:09Z

commit 447ee1516f19f534a228dda237eddb202f23e163 upstream. It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART") Signed-off-by: Yang Yingliang Reviewed-by: Baruch Siach Cc: stable Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman

ping: fix address binding wrt vrf

2022-05-18T07:18:09Z

commit e1a7ac6f3ba6e157adcd0ca94d92a401f1943f56 upstream. When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket, instead of an IP raw socket. In this case, 'ping' is unable to bind its socket to a local address owned by a vrflite. Before the patch: $ sysctl -w net.ipv4.ping_group_range='0 2147483647' $ ip link add blue type vrf table 10 $ ip link add foo type dummy $ ip link set foo master blue $ ip link set foo up $ ip addr add 192.168.1.1/24 dev foo $ ip addr add 2001::1/64 dev foo $ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2 ping: bind: Cannot assign requested address $ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2 ping6: bind icmp socket: Cannot assign requested address CC: stable@vger.kernel.org Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction") Signed-off-by: Nicolas Dichtel Reviewed-by: David Ahern Signed-off-by: Jakub Kicinski Signed-off-by: Nicolas Dichtel Signed-off-by: Greg Kroah-Hartman

drm/vmwgfx: Initialize drm_mode_fb_cmd2

2022-05-18T07:18:09Z

commit 3059d9b9f6aa433a55b9d0d21b566396d5497c33 upstream. Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags and modifiers which were never initialized. Garbage in those members can cause random failures during the bringup of the fbcon. Initializing the structure fixes random blank screens after bootup due to flags/modifiers mismatches during the fbcon bring up. Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2") Signed-off-by: Zack Rusin Cc: Daniel Vetter Cc: # v4.10+ Reviewed-by: Martin Krastev Reviewed-by: Maaz Mombasawala Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org Signed-off-by: Greg Kroah-Hartman

cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()

2022-05-18T07:18:08Z

commit 2685027fca387b602ae565bff17895188b803988 upstream. There are 3 places where the cpu and node masks of the top cpuset can be initialized in the order they are executed: 1) start_kernel -> cpuset_init() 2) start_kernel -> cgroup_init() -> cpuset_bind() 3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp() The first cpuset_init() call just sets all the bits in the masks. The second cpuset_bind() call sets cpus_allowed and mems_allowed to the default v2 values. The third cpuset_init_smp() call sets them back to v1 values. For systems with cgroup v2 setup, cpuset_bind() is called once. As a result, cpu and memory node hot add may fail to update the cpu and node masks of the top cpuset to include the newly added cpu or node in a cgroup v2 environment. For systems with cgroup v1 setup, cpuset_bind() is called again by rebind_subsystem() when the v1 cpuset filesystem is mounted as shown in the dmesg log below with an instrumented kernel. [ 2.609781] cpuset_bind() called - v2 = 1 [ 3.079473] cpuset_init_smp() called [ 7.103710] cpuset_bind() called - v2 = 0 smp_init() is called after the first two init functions. So we don't have a complete list of active cpus and memory nodes until later in cpuset_init_smp() which is the right time to set up effective_cpus and effective_mems. To fix this cgroup v2 mask setup problem, the potentially incorrect cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed. For cgroup v2 systems, the initial cpuset_bind() call will set the masks correctly. For cgroup v1 systems, the second call to cpuset_bind() will do the right setup. cc: stable@vger.kernel.org Signed-off-by: Waiman Long Tested-by: Feng Tang Reviewed-by: Michal Koutný Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Fibocom MA510 modem

2022-05-18T07:18:08Z

commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream. The MA510 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the following interfaces, respectively: 30: Diag + QDSS + Modem + RMNET 31: Diag + Modem + AT + ECM 32: Modem + AT + ECM The first configuration (30) reuses u-blox R410M's VID/PID with identical interface configuration. A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 30 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=90b2 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0106 Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=010a Rev= 0.00 S: Manufacturer=Fibocom MA510 Modem S: Product=Fibocom MA510 Modem S: SerialNumber=55e2695b C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Fibocom L610 modem

2022-05-18T07:18:08Z

commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream. The L610 modem has 3 USB configurations that are configurable via the AT command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the following interfaces, respectively: 31: Modem + NV + MOS + Diag + LOG + AT + AT 32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT 33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT A detailed description of the USB configuration for each mode follows: +GTUSBMODE: 31 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d10 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 32 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms +GTUSBMODE: 33 -------------- T: Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4d11 Rev= 0.00 S: Manufacturer=FIBOCOM S: Product=L610 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03 I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Sven Schwermer Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add support for Sierra Wireless EM7590

2022-05-18T07:18:08Z

commit 870b1eee2d844727b06e238c121d260bc5645580 upstream. Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions. Signed-off-by: Ethan Yang Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: add device id for HP LM930 Display

2022-05-18T07:18:08Z

commit 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream. Add the device id for the HPLM930Display which is a PL2303GC based device. Signed-off-by: Scott Chen Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: cdc-wdm: fix reading stuck on device close

2022-05-18T07:18:07Z

commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream. cdc-wdm tracks whether a response reading request is in-progress and blocks the next request from being sent until the previous request is completed. As soon as last user closes the cdc-wdm device file, the driver cancels any ongoing requests, resets the pending response counter, but leaves the response reading in-progress flag (WDM_RESPONDING) untouched. So if the user closes the device file during the response receive request is being performed, no more data will be obtained from the modem. The request will be cancelled, effectively preventing the WDM_RESPONDING flag from being reseted. Keeping the flag set will prevent a new response receive request from being sent, permanently blocking the read path. The read path will staying blocked until the module will be reloaded or till the modem will be re-attached. This stuck has been observed with a Huawei E3372 modem attached to an OpenWrt router and using the comgt utility to set up a network connection. Fix this issue by clearing the WDM_RESPONDING flag on the device file close. Without this fix, the device reading stuck can be easily reproduced in a few connection establishing attempts. With this fix, a load test for modem connection re-establishing worked for several hours without any issues. Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device") Signed-off-by: Sergey Ryazanov Cc: stable Acked-by: Oliver Neukum Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com Signed-off-by: Greg Kroah-Hartman