user/sven/linux.git, branch v4.14.72

Linux 4.14.72

2018-09-26T06:38:16Z

e1000e: Fix check_for_link return value with autoneg off

2018-09-26T06:38:16Z

commit 4e7dc08e57c95673d2edaba8983c3de4dd1f65f5 upstream. When autoneg is off, the .check_for_link callback functions clear the get_link_status flag and systematically return a "pseudo-error". This means that the link is not detected as up until the next execution of the e1000_watchdog_task() 2 seconds later. Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier Acked-by: Sasha Neftin Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

e1000e: Fix link check race condition

2018-09-26T06:38:15Z

commit e2710dbf0dc1e37d85368e2404049dadda848d5a upstream. Alex reported the following race condition: /* link goes up... interrupt... schedule watchdog */ \ e1000_watchdog_task \ e1000e_has_link \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link \ e1000e_phy_has_link_generic(..., &link) link = true /* link goes down... interrupt */ \ e1000_msix_other hw->mac.get_link_status = true /* link is up */ mac->get_link_status = false link_active = true /* link_active is true, wrongly, and stays so because * get_link_status is false */ Avoid this problem by making sure that we don't set get_link_status = false after having checked the link. It seems this problem has been present since the introduction of e1000e. Link: https://lkml.org/lkml/2018/1/29/338 Reported-by: Alexander Duyck Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

Revert "e1000e: Separate signaling for link check/link up"

2018-09-26T06:38:15Z

commit 3016e0a0c91246e55418825ba9aae271be267522 upstream. This reverts commit 19110cfbb34d4af0cdfe14cd243f3b09dc95b013. This reverts commit 4110e02eb45ea447ec6f5459c9934de0a273fb91. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfbb34d is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789 Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

e1000e: Avoid missed interrupts following ICR read

2018-09-26T06:38:15Z

commit 116f4a640b3197401bc93b8adc6c35040308ceff upstream. The 82574 specification update errata 12 states that interrupts may be missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by setting all bits related to events that can trigger the Other interrupt in IMS. The Other interrupt is raised for such events regardless of whether or not they are set in IMS. However, only when they are set is the INT_ASSERTED bit also set in ICR. By doing this, we ensure that INT_ASSERTED is always set when we read ICR in e1000_msix_other() and steer clear of the errata. This also ensures that ICR will automatically be cleared on read, therefore we no longer need to clear bits explicitly. Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

e1000e: Fix queue interrupt re-raising in Other interrupt

2018-09-26T06:38:15Z

commit 361a954e6a7215de11a6179ad9bdc07d7e394b04 upstream. Restores the ICS write for Rx/Tx queue interrupts which was present before commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1) but was not restored in commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). This re-raises the queue interrupts in case the txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

Partial revert "e1000e: Avoid receiver overrun interrupt bursts"

2018-09-26T06:38:15Z

commit 1f0ea19722ef9dfa229a9540f70b8d1c34a98a6a upstream. This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d. We keep the fix for the first part of the problem (1) described in the log of that commit, that is to read ICR in the other interrupt handler. We remove the fix for the second part of the problem (2), Other interrupt throttling. Bursts of "Other" interrupts may once again occur during rxo (receive overflow) traffic conditions. This is deemed acceptable in the interest of avoiding unforeseen fallout from changes that are not strictly necessary. As discussed, the e1000e driver should be in "maintenance mode". Link: https://www.spinics.net/lists/netdev/msg480675.html Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

e1000e: Remove Other from EIAC

2018-09-26T06:38:14Z

commit 745d0bd3af99ccc8c5f5822f808cd133eadad6ac upstream. It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). Some tracing shows that after e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other() on emulated e1000e devices. In comparison, on real e1000e 82574 hardware, icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation. Some experimentation showed that this flaw in vmware e1000e emulation can be worked around by not setting Other in EIAC. This is how it was before 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1). Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

net/ipv6: prevent use after free in ip6_route_mpath_notify

2018-09-26T06:38:14Z

commit f7225172f25aaf0dfd9ad65f05be8da5d6108b12 upstream. syzbot reported a use-after-free: BUG: KASAN: use-after-free in ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180 Read of size 4 at addr ffff8801bf789cf0 by task syz-executor756/4555 CPU: 1 PID: 4555 Comm: syz-executor756 Not tainted 4.17.0-rc7+ #78 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432 ip6_route_mpath_notify+0xe9/0x100 net/ipv6/route.c:4180 ip6_route_multipath_add+0x615/0x1910 net/ipv6/route.c:4303 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... Allocated by task 4555: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 dst_alloc+0xbb/0x1d0 net/core/dst.c:104 __ip6_dst_alloc+0x35/0xa0 net/ipv6/route.c:361 ip6_dst_alloc+0x29/0xb0 net/ipv6/route.c:376 ip6_route_info_create+0x4d4/0x3a30 net/ipv6/route.c:2834 ip6_route_multipath_add+0xc7e/0x1910 net/ipv6/route.c:4240 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... Freed by task 4555: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 dst_destroy+0x267/0x3c0 net/core/dst.c:140 dst_release_immediate+0x71/0x9e net/core/dst.c:205 fib6_add+0xa40/0x1650 net/ipv6/ip6_fib.c:1305 __ip6_ins_rt+0x6c/0x90 net/ipv6/route.c:1011 ip6_route_multipath_add+0x513/0x1910 net/ipv6/route.c:4267 inet6_rtm_newroute+0xe3/0x160 net/ipv6/route.c:4391 ... The problem is that rt_last can point to a deleted route if the insert fails. One reproducer is to insert a route and then add a multipath route that has a duplicate nexthop.e.g,: $ ip -6 ro add vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::2 $ ip -6 ro append vrf red 2001:db8:101::/64 nexthop via 2001:db8:1::4 nexthop via 2001:db8:1::2 Fix by not setting rt_last until the it is verified the insert succeeded. Backport Note: - Upstream has replaced rt6_info usage with fib6_info in 8d1c802b281 ("net/ipv6: Flip FIB entries to fib6_info") - fib6_info_release was introduced upstream in 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes"), but is not present in stable kernels; 4.14.y relies on dst_release/ ip6_rt_put/dst_release_immediate. Fixes: 3b1137fe7482 ("net: ipv6: Change notifications for multipath add to RTA_MULTIPATH") Cc: Eric Dumazet Reported-by: syzbot Signed-off-by: David Ahern Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Zubin Mithra Signed-off-by: Greg Kroah-Hartman

drm/i915: Apply the GTT write flush for all !llc machines

2018-09-26T06:38:14Z

commit c5ba5b24657e473b1c64b0a614b168a635a2c935 upstream. We also see the delayed GTT write issue on i915g/i915gm, so let's presume that it is a universal problem for all !llc machines, and that we just haven't yet noticed on g33, gen4 and gen5 machines. v2: Use a register that exists on all platforms Testcase: igt/gem_mmap_gtt/coherency # i915gm References: https://bugs.freedesktop.org/show_bug.cgi?id=102577 Signed-off-by: Chris Wilson Cc: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20170907184520.5032-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman