user/sven/linux.git, branch v4.15.8

Linux 4.15.8

2018-03-09T06:47:50Z

platform/x86: dell-laptop: fix kbd_get_state's request value

2018-03-09T06:47:50Z

commit eca39e7f0cdb9bde4003a29149fa695e876c6f73 upstream. Commit 9862b43624a5 ("platform/x86: dell-laptop: Allocate buffer on heap rather than globally") broke one request, changed it back to the original value. Tested on a Dell E6540, backlight came back. Fixes: 9862b43624a5 ("platform/x86: dell-laptop: Allocate buffer on heap rather than globally") Signed-off-by: Laszlo Toth Reviewed-by: Pali Rohár Reviewed-by: Mario Limonciello Signed-off-by: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

md: only allow remove_and_add_spares when no sync_thread running.

2018-03-09T06:47:49Z

commit 39772f0a7be3b3dc26c74ea13fe7847fd1522c8b upstream. The locking protocols in md assume that a device will never be removed from an array during resync/recovery/reshape. When that isn't happening, rcu or reconfig_mutex is needed to protect an rdev pointer while taking a refcount. When it is happening, that protection isn't needed. Unfortunately there are cases were remove_and_add_spares() is called when recovery might be happening: is state_store(), slot_store() and hot_remove_disk(). In each case, this is just an optimization, to try to expedite removal from the personality so the device can be removed from the array. If resync etc is happening, we just have to wait for md_check_recover to find a suitable time to call remove_and_add_spares(). This optimization and not essential so it doesn't matter if it fails. So change remove_and_add_spares() to abort early if resync/recovery/reshape is happening, unless it is called from md_check_recovery() as part of a newly started recovery. The parameter "this" is only NULL when called from md_check_recovery() so when it is NULL, there is no need to abort. As this can result in a NULL dereference, the fix is suitable for -stable. cc: yuyufen Cc: Tomasz Majchrzak Fixes: 8430e7e0af9a ("md: disconnect device from personality before trying to remove it.") Cc: stable@ver.kernel.org (v4.8+) Signed-off-by: NeilBrown Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

powerpc/64s/radix: Boot-time NULL pointer protection using a guard-PID

2018-03-09T06:47:49Z

commit eeb715c3e995fbdda0cc05e61216c6c5609bce66 upstream. This change restores and formalises the behaviour that access to NULL or other user addresses by the kernel during boot should fault rather than succeed and modify memory. This was inadvertently broken when fixing another bug, because it was previously not well defined and only worked by chance. powerpc/64s/radix uses high address bits to select an address space "quadrant", which determines which PID and LPID are used to translate the rest of the address (effective PID, effective LPID). The kernel mapping at 0xC... selects quadrant 3, which uses PID=0 and LPID=0. So the kernel page tables are installed in the PID 0 process table entry. An address at 0x0... selects quadrant 0, which uses PID=PIDR for translating the rest of the address (that is, it uses the value of the PIDR register as the effective PID). If PIDR=0, then the translation is performed with the PID 0 process table entry page tables. This is the kernel mapping, so we effectively get another copy of the kernel address space at 0. A NULL pointer access will access physical memory address 0. To prevent duplicating the kernel address space in quadrant 0, this patch allocates a guard PID containing no translations, and initializes PIDR with this during boot, before the MMU is switched on. Any kernel access to quadrant 0 will use this guard PID for translation and find no valid mappings, and therefore fault. After boot, this PID will be switchd away to user context PIDs, but those contain user mappings (and usually NULL pointer protection) rather than kernel mapping, which is much safer (and by design). It may be in future this is tightened further, which the guard PID could be used for. Commit 371b8044 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table"), introduced this problem because it zeroes PIDR at boot. However previously the value was inherited from firmware or kexec, which is not robust and can be zero (e.g., mambo). Fixes: 371b80447ff3 ("powerpc/64s: Initialize ISAv3 MMU registers before setting partition table") Cc: stable@vger.kernel.org # v4.15+ Reported-by: Florian Weimer Tested-by: Mauricio Faria de Oliveira Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman [mauricfo: backport to v4.15.7 (context line updates only) and re-test] Signed-off-by: Mauricio Faria de Oliveira Acked-by: Michael Ellerman Signed-off-by: Greg Kroah-Hartman

ARM: dts: LogicPD Torpedo: Fix I2C1 pinmux

2018-03-09T06:47:49Z

commit 74402055a2d3ec998a1ded599e86185a27d9bbf4 upstream. The pinmuxing was missing for I2C1 which was causing intermittent issues with the PMIC which is connected to I2C1. The bootloader did not quite configure the I2C1 either, so when running at 2.6MHz, it was generating errors at time. This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz Fixes: 687c27676151 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

ARM: dts: LogicPD SOM-LV: Fix I2C1 pinmux

2018-03-09T06:47:49Z

commit 84c7efd607e7fb6933920322086db64654f669b2 upstream. The pinmuxing was missing for I2C1 which was causing intermittent issues with the PMIC which is connected to I2C1. The bootloader did not quite configure the I2C1 either, so when running at 2.6MHz, it was generating errors at times. This correctly sets the I2C1 pinmuxing so it can operate at 2.6MHz Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530

2018-03-09T06:47:49Z

commit 36904703aeeeb6cd31993f1353c8325006229f9a upstream. The i2c touchpad on Dell XPS 9570 and Precision M5530 doesn't work out of box. The touchpad relies on its _INI method to update its _HID value from XXXX0000 to SYNA2393. Also, the _STA relies on value of I2CN to report correct status. Set acpi_gbl_parse_table_as_term_list so the value of I2CN can be correctly set up, and _INI can get run. The ACPI table in this machine is designed to get parsed this way. Also, change the quirk table to a more generic name. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515 Signed-off-by: Kai-Heng Feng Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

KVM/x86: remove WARN_ON() for when vm_munmap() fails

2018-03-09T06:47:48Z

commit 103c763c72dd2df3e8c91f2d7ec88f98ed391111 upstream. On x86, special KVM memslots such as the TSS region have anonymous memory mappings created on behalf of userspace, and these mappings are removed when the VM is destroyed. It is however possible for removing these mappings via vm_munmap() to fail. This can most easily happen if the thread receives SIGKILL while it's waiting to acquire ->mmap_sem. This triggers the 'WARN_ON(r < 0)' in __x86_set_memory_region(). syzkaller was able to hit this, using 'exit()' to send the SIGKILL. Note that while the vm_munmap() failure results in the mapping not being removed immediately, it is not leaked forever but rather will be freed when the process exits. It's not really possible to handle this failure properly, so almost every other caller of vm_munmap() doesn't check the return value. It's a limitation of having the kernel manage these mappings rather than userspace. So just remove the WARN_ON() so that users can't spam the kernel log with this warning. Fixes: f0d648bdf0a5 ("KVM: x86: map/unmap private slots in __x86_set_memory_region") Reported-by: syzbot Signed-off-by: Eric Biggers Signed-off-by: Radim Krčmář Signed-off-by: Jack Wang Signed-off-by: Greg Kroah-Hartman

KVM: x86: fix vcpu initialization with userspace lapic

2018-03-09T06:47:48Z

commit b7e31be385584afe7f073130e8e570d53c95f7fe upstream. Moving the code around broke this rare configuration. Use this opportunity to finally call lapic reset from vcpu reset. Reported-by: syzbot+fb7a33a4b6c35007a72b@syzkaller.appspotmail.com Suggested-by: Paolo Bonzini Fixes: 0b2e9904c159 ("KVM: x86: move LAPIC initialization after VMCS creation") Cc: stable@vger.kernel.org Signed-off-by: Radim Krčmář Signed-off-by: Greg Kroah-Hartman

KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely()

2018-03-09T06:47:48Z

commit 946fbbc13dce68902f64515b610eeb2a6c3d7a64 upstream. vmx_vcpu_run() and svm_vcpu_run() are large functions, and giving branch hints to the compiler can actually make a substantial cycle difference by keeping the fast path contiguous in memory. With this optimization, the retpoline-guest/retpoline-host case is about 50 cycles faster. Signed-off-by: Paolo Bonzini Reviewed-by: Jim Mattson Cc: David Woodhouse Cc: KarimAllah Ahmed Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Radim Krčmář Cc: Thomas Gleixner Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180222154318.20361-3-pbonzini@redhat.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman