user/sven/linux.git, branch v4.19.12

Linux 4.19.12

2018-12-21T13:15:25Z

Btrfs: fix missing delayed iputs on unmount

2018-12-21T13:15:25Z

[ Upstream commit d6fd0ae25c6495674dc5a41a8d16bc8e0073276d ] There's a race between close_ctree() and cleaner_kthread(). close_ctree() sets btrfs_fs_closing(), and the cleaner stops when it sees it set, but this is racy; the cleaner might have already checked the bit and could be cleaning stuff. In particular, if it deletes unused block groups, it will create delayed iputs for the free space cache inodes. As of "btrfs: don't run delayed_iputs in commit", we're no longer running delayed iputs after a commit. Therefore, if the cleaner creates more delayed iputs after delayed iputs are run in btrfs_commit_super(), we will leak inodes on unmount and get a busy inode crash from the VFS. Fix it by parking the cleaner before we actually close anything. Then, any remaining delayed iputs will always be handled in btrfs_commit_super(). This also ensures that the commit in close_ctree() is really the last commit, so we can get rid of the commit in cleaner_kthread(). The fstest/generic/475 followed by 476 can trigger a crash that manifests as a slab corruption caused by accessing the freed kthread structure by a wake up function. Sample trace: [ 5657.077612] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc [ 5657.079432] PGD 1c57a067 P4D 1c57a067 PUD da10067 PMD 0 [ 5657.080661] Oops: 0000 [#1] PREEMPT SMP [ 5657.081592] CPU: 1 PID: 5157 Comm: fsstress Tainted: G W 4.19.0-rc8-default+ #323 [ 5657.083703] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014 [ 5657.086577] RIP: 0010:shrink_page_list+0x2f9/0xe90 [ 5657.091937] RSP: 0018:ffffb5c745c8f728 EFLAGS: 00010287 [ 5657.092953] RAX: 0000000000000074 RBX: ffffb5c745c8f830 RCX: 0000000000000000 [ 5657.094590] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a8747fdf3d0 [ 5657.095987] RBP: ffffb5c745c8f9e0 R08: 0000000000000000 R09: 0000000000000000 [ 5657.097159] R10: ffff9a8747fdf5e8 R11: 0000000000000000 R12: ffffb5c745c8f788 [ 5657.098513] R13: ffff9a877f6ff2c0 R14: ffff9a877f6ff2c8 R15: dead000000000200 [ 5657.099689] FS: 00007f948d853b80(0000) GS:ffff9a877d600000(0000) knlGS:0000000000000000 [ 5657.101032] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5657.101953] CR2: 00000000000000cc CR3: 00000000684bd000 CR4: 00000000000006e0 [ 5657.103159] Call Trace: [ 5657.103776] shrink_inactive_list+0x194/0x410 [ 5657.104671] shrink_node_memcg.constprop.84+0x39a/0x6a0 [ 5657.105750] shrink_node+0x62/0x1c0 [ 5657.106529] try_to_free_pages+0x1a4/0x500 [ 5657.107408] __alloc_pages_slowpath+0x2c9/0xb20 [ 5657.108418] __alloc_pages_nodemask+0x268/0x2b0 [ 5657.109348] kmalloc_large_node+0x37/0x90 [ 5657.110205] __kmalloc_node+0x236/0x310 [ 5657.111014] kvmalloc_node+0x3e/0x70 Fixes: 30928e9baac2 ("btrfs: don't run delayed_iputs in commit") Signed-off-by: Omar Sandoval Reviewed-by: David Sterba [ add trace ] Signed-off-by: David Sterba Signed-off-by: Sasha Levin

nvmet-rdma: fix response use after free

2018-12-21T13:15:25Z

[ Upstream commit d7dcdf9d4e15189ecfda24cc87339a3425448d5c ] nvmet_rdma_release_rsp() may free the response before using it at error flow. Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load") Signed-off-by: Israel Rukshin Reviewed-by: Sagi Grimberg Reviewed-by: Max Gurtovoy Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme: validate controller state before rescheduling keep alive

2018-12-21T13:15:25Z

[ Upstream commit 86880d646122240596d6719b642fee3213239994 ] Delete operations are seeing NULL pointer references in call_timer_fn. Tracking these back, the timer appears to be the keep alive timer. nvme_keep_alive_work() which is tied to the timer that is cancelled by nvme_stop_keep_alive(), simply starts the keep alive io but doesn't wait for it's completion. So nvme_stop_keep_alive() only stops a timer when it's pending. When a keep alive is in flight, there is no timer running and the nvme_stop_keep_alive() will have no affect on the keep alive io. Thus, if the io completes successfully, the keep alive timer will be rescheduled. In the failure case, delete is called, the controller state is changed, the nvme_stop_keep_alive() is called while the io is outstanding, and the delete path continues on. The keep alive happens to successfully complete before the delete paths mark it as aborted as part of the queue termination, so the timer is restarted. The delete paths then tear down the controller, and later on the timer code fires and the timer entry is now corrupt. Fix by validating the controller state before rescheduling the keep alive. Testing with the fix has confirmed the condition above was hit. Signed-off-by: James Smart Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

i2c: uniphier-f: fix violation of tLOW requirement for Fast-mode

2018-12-21T13:15:24Z

[ Upstream commit ece27a337d42a3197935711997f2880f0957ed7e ] Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode, tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us. tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode: Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us Fast-mode: tLOW = 1.39 us, tHIGH = 1.11 us Signed-off-by: Masahiro Yamada Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: uniphier: fix violation of tLOW requirement for Fast-mode

2018-12-21T13:15:24Z

[ Upstream commit 8469636ab5d8c77645b953746c10fda6983a8830 ] Currently, the clock duty is set as tLOW/tHIGH = 1/1. For Fast-mode, tLOW is set to 1.25 us while the I2C spec requires tLOW >= 1.3 us. tLOW/tHIGH = 5/4 would meet both Standard-mode and Fast-mode: Standard-mode: tLOW = 5.56 us, tHIGH = 4.44 us Fast-mode: tLOW = 1.39 us, tHIGH = 1.11 us Signed-off-by: Masahiro Yamada Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: scmi: Fix probe error on devices with an empty SMB0001 ACPI device node

2018-12-21T13:15:24Z

[ Upstream commit 0544ee4b1ad574aec3b6379af5f5cdee42840971 ] Some AMD based HP laptops have a SMB0001 ACPI device node which does not define any methods. This leads to the following error in dmesg: [ 5.222731] cmi: probe of SMB0001:00 failed with error -5 This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case silencing the error. In case of a failure of the i2c_add_adapter() call this commit now propagates the error from that call instead of -EIO. Signed-off-by: Hans de Goede Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: axxia: properly handle master timeout

2018-12-21T13:15:24Z

[ Upstream commit 6c7f25cae54b840302e4f1b371dbf318fbf09ab2 ] According to Intel (R) Axxia TM Lionfish Communication Processor Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module have a programmable Master Wait Timer, which among others, checks the time between commands send in manual mode. When a timeout (25ms) passes, TSS bit is set in Master Interrupt Status register and a Stop command is issued by the hardware. The axxia_i2c_xfer(), does not properly handle this situation, however. For each message a separate axxia_i2c_xfer_msg() is called and this function incorrectly assumes that any interrupt might happen only when waiting for completion. This is mostly correct but there is one exception - a master timeout can trigger if enough time has passed between individual transfers. It will, by definition, happen between transfers when the interrupts are disabled by the code. If that happens, the hardware issues Stop command. The interrupt indicating timeout will not be triggered as soon as we enable them since the Master Interrupt Status is cleared when master mode is entered again (which happens before enabling irqs) meaning this error is lost and the transfer is continued even though the Stop was issued on the bus. The subsequent operations completes without error but a bogus value (0xFF in case of read) is read as the client device is confused because aborted transfer. No error is returned from master_xfer() making caller believe that a valid value was read. To fix the problem, the TSS bit (indicating timeout) in Master Interrupt Status register is checked before each transfer. If it is set, there was a timeout before this transfer and (as described above) the hardware already issued Stop command so the transaction should be aborted thus -ETIMEOUT is returned from the master_xfer() callback. In order to be sure no timeout was issued we can't just read the status just before starting new transaction as there will always be a small window of time (few CPU cycles at best) where this might still happen. For this reason we have to temporally disable the timer before checking for TSS bit. Disabling it will, however, clear the TSS bit so in order to preserve that information, we have to read it in ISR so we have to ensure that the TSS interrupt is not masked between transfers of one transaction. There is no need to call bus recovery or controller reinitialization if that happens so it's skipped. Signed-off-by: Krzysztof Adamski Reviewed-by: Alexander Sverdlin Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl

2018-12-21T13:15:24Z

[ Upstream commit 993107fea5eefdfdfde1ca38d3f01f0bebf76e77 ] When deleting a VLAN device using an ioctl the netdev is unregistered before the VLAN filter is updated via ndo_vlan_rx_kill_vid(). It can lead to a use-after-free in mlxsw in case the VLAN device is deleted while being enslaved to a bridge. The reason for the above is that when mlxsw receives the CHANGEUPPER event, it wrongly assumes that the VLAN device is no longer its upper and thus destroys the internal representation of the bridge port despite the reference count being non-zero. Fix this by checking if the VLAN device is our upper using its real device. In net-next I'm going to remove this trick and instead make mlxsw completely agnostic to the order of the events. Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vhost/vsock: fix reset orphans race with close timeout

2018-12-21T13:15:23Z

[ Upstream commit c38f57da428b033f2721b611d84b1f40bde674a8 ] If a local process has closed a connected socket and hasn't received a RST packet yet, then the socket remains in the table until a timeout expires. When a vhost_vsock instance is released with the timeout still pending, the socket is never freed because vhost_vsock has already set the SOCK_DONE flag. Check if the close timer is pending and let it close the socket. This prevents the race which can leak sockets. Reported-by: Maximilian Riemensberger Cc: Graham Whaley Signed-off-by: Stefan Hajnoczi Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin