user/sven/linux.git, branch v4.19.23

Linux 4.19.23

2019-02-15T08:09:54Z

Revert "exec: load_script: don't blindly truncate shebang string"

2019-02-15T08:09:54Z

commit cb5b020a8d38f77209d0472a0fea755299a8ec78 upstream. This reverts commit 8099b047ecc431518b9bb6bdbba3549bbecdc343. It turns out that people do actually depend on the shebang string being truncated, and on the fact that an interpreter (like perl) will often just re-interpret it entirely to get the full argument list. Reported-by: Samuel Dionne-Riel Acked-by: Kees Cook Cc: Oleg Nesterov Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Linux 4.19.22

2019-02-15T07:10:13Z

svcrdma: Remove max_sge check at connect time

2019-02-15T07:10:13Z

commit e248aa7be86e8179f20ac0931774ecd746f3f5bf upstream. Two and a half years ago, the client was changed to use gathered Send for larger inline messages, in commit 655fec6987b ("xprtrdma: Use gathered Send for large inline messages"). Several fixes were required because there are a few in-kernel device drivers whose max_sge is 3, and these were broken by the change. Apparently my memory is going, because some time later, I submitted commit 25fd86eca11c ("svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt"), and after that, commit f3c1fd0ee294 ("svcrdma: Reduce max_send_sges"). These too incorrectly assumed in-kernel device drivers would have more than a few Send SGEs available. The fix for the server side is not the same. This is because the fundamental problem on the server is that, whether or not the client has provisioned a chunk for the RPC reply, the server must squeeze even the most complex RPC replies into a single RDMA Send. Failing in the send path because of Send SGE exhaustion should never be an option. Therefore, instead of failing when the send path runs out of SGEs, switch to using a bounce buffer mechanism to handle RPC replies that are too complex for the device to send directly. That allows us to remove the max_sge check to enable drivers with small max_sge to work again. Reported-by: Don Dutile Fixes: 25fd86eca11c ("svcrdma: Don't overrun the SGE array in ...") Cc: stable@vger.kernel.org Signed-off-by: Chuck Lever Signed-off-by: J. Bruce Fields Signed-off-by: Greg Kroah-Hartman

svcrdma: Reduce max_send_sges

2019-02-15T07:10:13Z

commit f3c1fd0ee294abd4367dfa72d89f016c682202f0 upstream. There's no need to request a large number of send SGEs because the inline threshold already constrains the number of SGEs per Send. Signed-off-by: Chuck Lever Reviewed-by: Sagi Grimberg Signed-off-by: J. Bruce Fields Cc: Don Dutile Signed-off-by: Greg Kroah-Hartman

batman-adv: Force mac header to start of data on xmit

2019-02-15T07:10:13Z

commit 9114daa825fc3f335f9bea3313ce667090187280 upstream. The caller of ndo_start_xmit may not already have called skb_reset_mac_header. The returned value of skb_mac_header/eth_hdr therefore can be in the wrong position and even outside the current skbuff. This for example happens when the user binds to the device using a PF_PACKET-SOCK_RAW with enabled qdisc-bypass: int opt = 4; setsockopt(sock, SOL_PACKET, PACKET_QDISC_BYPASS, &opt, sizeof(opt)); Since eth_hdr is used all over the codebase, the batadv_interface_tx function must always take care of resetting it. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Reported-by: syzbot+9d7405c7faa390e60b4e@syzkaller.appspotmail.com Reported-by: syzbot+7d20bc3f1ddddc0f9079@syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman

batman-adv: Avoid WARN on net_device without parent in netns

2019-02-15T07:10:13Z

commit 955d3411a17f590364238bd0d3329b61f20c1cd2 upstream. It is not allowed to use WARN* helpers on potential incorrect input from the user or transient problems because systems configured as panic_on_warn will reboot due to such a problem. A NULL return value of __dev_get_by_index can be caused by various problems which can either be related to the system configuration or problems (incorrectly returned network namespaces) in other (virtual) net_device drivers. batman-adv should not cause a (harmful) WARN in this situation and instead only report it via a simple message. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Reported-by: syzbot+c764de0fcfadca9a8595@syzkaller.appspotmail.com Reported-by: Dmitry Vyukov Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman

xfrm: refine validation of template and selector families

2019-02-15T07:10:13Z

commit 35e6103861a3a970de6c84688c6e7a1f65b164ca upstream. The check assumes that in transport mode, the first templates family must match the address family of the policy selector. Syzkaller managed to build a template using MODE_ROUTEOPTIMIZATION, with ipv4-in-ipv6 chain, leading to following splat: BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x1db/0x1854 Read of size 4 at addr ffff888063e57aa0 by task a.out/2050 xfrm_state_find+0x1db/0x1854 xfrm_tmpl_resolve+0x100/0x1d0 xfrm_resolve_and_create_bundle+0x108/0x1000 [..] Problem is that addresses point into flowi4 struct, but xfrm_state_find treats them as being ipv6 because it uses templ->encap_family is used (AF_INET6 in case of reproducer) rather than family (AF_INET). This patch inverts the logic: Enforce 'template family must match selector' EXCEPT for tunnel and BEET mode. In BEET and Tunnel mode, xfrm_tmpl_resolve_one will have remote/local address pointers changed to point at the addresses found in the template, rather than the flowi ones, so no oob read will occur. Reported-by: 3ntr0py1337@gmail.com Reported-by: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman

libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()

2019-02-15T07:10:13Z

commit 4aac9228d16458cedcfd90c7fb37211cf3653ac3 upstream. con_fault() can transition the connection into STANDBY right after ceph_con_keepalive() clears STANDBY in clear_standby(): libceph user thread ceph-msgr worker ceph_con_keepalive() mutex_lock(&con->mutex) clear_standby(con) mutex_unlock(&con->mutex) mutex_lock(&con->mutex) con_fault() ... if KEEPALIVE_PENDING isn't set set state to STANDBY ... mutex_unlock(&con->mutex) set KEEPALIVE_PENDING set WRITE_PENDING This triggers warnings in clear_standby() when either ceph_con_send() or ceph_con_keepalive() get to clearing STANDBY next time. I don't see a reason to condition queue_con() call on the previous value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING could have been a non-atomic flag. Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov Tested-by: Myungho Jung Signed-off-by: Greg Kroah-Hartman

Revert "ext4: use ext4_write_inode() when fsyncing w/o a journal"

2019-02-15T07:10:13Z

commit 8fdd60f2ae3682caf2a7258626abc21eb4711892 upstream. This reverts commit ad211f3e94b314a910d4af03178a0b52a7d1ee0a. As Jan Kara pointed out, this change was unsafe since it means we lose the call to sync_mapping_buffers() in the nojournal case. The original point of the commit was avoid taking the inode mutex (since it causes a lockdep warning in generic/113); but we need the mutex in order to call sync_mapping_buffers(). The real fix to this problem was discussed here: https://lore.kernel.org/lkml/20181025150540.259281-4-bvanassche@acm.org The proposed patch was to fix a syzbot complaint, but the problem can also demonstrated via "kvm-xfstests -c nojournal generic/113". Multiple solutions were discused in the e-mail thread, but none have landed in the kernel as of this writing. Anyway, commit ad211f3e94b314 is absolutely the wrong way to suppress the lockdep, so revert it. Fixes: ad211f3e94b314a910d4af03178a0b52a7d1ee0a ("ext4: use ext4_write_inode() when fsyncing w/o a journal") Signed-off-by: Theodore Ts'o Reported: Jan Kara Signed-off-by: Greg Kroah-Hartman