user/sven/linux.git, branch v4.3-rc7

Linux 4.3-rc7

2015-10-25T01:39:47Z

Merge tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2015-10-23T22:52:59Z

Pull USB fixes from Greg KH: "Here are three xhci driver fixes for reported issues for 4.3-rc7 All have been in linux-next for a while with no problems" * tag 'usb-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: Add spurious wakeup quirk for LynxPoint-LP controllers xhci: handle no ping response error properly xhci: don't finish a TD if we get a short transfer event mid TD

Merge tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2015-10-23T22:52:09Z

Pull tty/serial fixes from Greg KH: "Here are two fixes that resolve reported issues, one with the 8250 driver, and the other with the generic fbcon driver. Both have been in linux-next for a while" * tag 'tty-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fbcon: initialize blink interval before calling fb_set_par Revert "serial: 8250_dma: don't bother DMA with small transfers"

Merge tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2015-10-23T22:51:13Z

Pull staging driver fixes from Greg KH: "Here are four iio driver fixes for 4.3-rc7, fixing some reported issues. All of these have been in linux-next for a while" * tag 'staging-4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: mxs-lradc: Fix temperature offset iio: accel: sca3000: memory corruption in sca3000_read_first_n_hw_rb() iio: st_accel: fix interrupt handling on LIS3LV02 iio: adc: twl4030: Fix ADC[3:6] readings

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2015-10-23T22:28:05Z

Pull infiniband fixes from Doug Ledford: "It's late in the game, I know, but these fixes seemed important enough to warrant a late pull request. They all involve oopses or use after frees or corruptions. Six serious fixes: - Hold the mutex around the find and corresponding update of our gid - The ifa list is rcu protected, copy its contents under rcu to avoid using a freed structure - On error, netdev might be null, so check it before trying to release it - On init, if workqueue alloc fails, fail init - The new demux patches exposed a bug in mlx5 and ipath drivers, we need to use the payload P_Key to determine the P_Key the packet arrived on because the hardware doesn't tell us the truth - Due to a couple convoluted error flows, it is possible for the CM to trigger a use_after_free and a double_free of rb nodes. Add two checks to prevent that. This code has worked for 10+ years. It is likely that some of the recent changes have caused this issue to surface. The current patch will protect us from nasty events for now while we track down why this is just now showing up" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/cm: Fix rb-tree duplicate free and use-after-free IB/cma: Use inner P_Key to determine netdev IB/ucma: check workqueue allocation before usage IB/cma: Potential NULL dereference in cma_id_from_event IB/core: Fix use after free of ifa IB/core: Fix memory corruption in ib_cache_gid_set_default_gid

Merge tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

2015-10-23T22:23:52Z

Pull device mapper fixes from Mike Snitzer: "Three stable fixes (two in btree code used by DM thinp and one to properly store flags in DM cache metadata's superblock)" * tag 'dm-4.3-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache: the CLEAN_SHUTDOWN flag was not being set dm btree: fix leak of bufio-backed block in btree_split_beneath error path dm btree remove: fix a bug when rebalancing nodes after removal

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

2015-10-23T22:20:57Z

Pull block layer fixes from Jens Axboe: "A final set of fixes for 4.3. It is (again) bigger than I would have liked, but it's all been through the testing mill and has been carefully reviewed by multiple parties. Each fix is either a regression fix for this cycle, or is marked stable. You can scold me at KS. The pull request contains: - Three simple fixes for NVMe, fixing regressions since 4.3. From Arnd, Christoph, and Keith. - A single xen-blkfront fix from Cathy, fixing a NULL dereference if an error is returned through the staste change callback. - Fixup for some bad/sloppy code in nbd that got introduced earlier in this cycle. From Markus Pargmann. - A blk-mq tagset use-after-free fix from Junichi. - A backing device lifetime fix from Tejun, fixing a crash. - And finally, a set of regression/stable fixes for cgroup writeback from Tejun" * 'for-linus' of git://git.kernel.dk/linux-block: writeback: remove broken rbtree_postorder_for_each_entry_safe() usage in cgwb_bdi_destroy() NVMe: Fix memory leak on retried commands block: don't release bdi while request_queue has live references nvme: use an integer value to Linux errno values blk-mq: fix use-after-free in blk_mq_free_tag_set() nvme: fix 32-bit build warning writeback: fix incorrect calculation of available memory for memcg domains writeback: memcg dirty_throttle_control should be initialized with wb->memcg_completions writeback: bdi_writeback iteration must not skip dying ones writeback: fix bdi_writeback iteration in wakeup_dirtytime_writeback() writeback: laptop_mode_timer_fn() needs rcu_read_lock() around bdi_writeback iteration nbd: Add locking for tasks xen-blkfront: check for null drvdata in blkback_changed (XenbusStateClosing)

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client

2015-10-23T22:19:33Z

Pull Ceph fixes from Sage Weil: "Two fixes. One is a stopgap to prevent a stack blowout when users have a deep chain of image clones. (We'll rewrite this code to be non-recursive for the next window, but in the meantime this is a simple fix that avoids a crash.) The second fixes a refcount underflow" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: rbd: prevent kernel stack blow up on rbd map rbd: don't leak parent_spec in rbd_dev_probe_parent()

Merge branch 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs

2015-10-23T22:17:58Z

Pull btrfs fixes from Chris Mason: "I have two more small fixes this week: Qu's fix avoids unneeded COW during fallocate, and Christian found a memory leak in the error handling of an earlier fix" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix possible leak in btrfs_ioctl_balance() btrfs: Avoid truncate tailing page if fallocate range doesn't exceed inode size

dm cache: the CLEAN_SHUTDOWN flag was not being set

2015-10-23T18:02:56Z

If the CLEAN_SHUTDOWN flag is not set when a cache is loaded then all cache blocks are marked as dirty and a full writeback occurs. __commit_transaction() is responsible for setting/clearing CLEAN_SHUTDOWN (based the flags_mutator that is passed in). Fix this issue, of the cache's on-disk flags being wrong, by making sure __commit_transaction() does not reset the flags after the mutator has altered the flags in preparation for them being serialized to disk. before: sb_flags = mutator(le32_to_cpu(disk_super->flags)); disk_super->flags = cpu_to_le32(sb_flags); disk_super->flags = cpu_to_le32(cmd->flags); after: disk_super->flags = cpu_to_le32(cmd->flags); sb_flags = mutator(le32_to_cpu(disk_super->flags)); disk_super->flags = cpu_to_le32(sb_flags); Reported-by: Bogdan Vasiliev Signed-off-by: Joe Thornber Signed-off-by: Mike Snitzer Cc: stable@vger.kernel.org