user/sven/linux.git, branch v4.4.135

Linux 4.4.135

2018-05-30T20:11:35Z

Revert "vti4: Don't override MTU passed on link creation via IFLA_MTU"

2018-05-30T20:11:35Z

This reverts commit 33cebc976c3b77bdf8f3fb4478cf776131ebfe4f which is 03080e5ec727 ("vti4: Don't override MTU passed on link creation via IFLA_MTU") upstream as it causes test failures. This commit should not have been backported to anything older than 4.16, despite what the changelog said as the mtu must be set in older kernels, unlike is needed in 4.16 and newer. Thanks to Alistair Strachan for the debugging help figuring this out, and for 'git bisect' for making my life a whole lot easier. Cc: Alistair Strachan Cc: Stefano Brivio Cc: Sabrina Dubroca Cc: Steffen Klassert Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Linux 4.4.134

2018-05-30T05:49:18Z

s390/ftrace: use expoline for indirect branches

2018-05-30T05:49:17Z

commit 23a4d7fd34856da8218c4cfc23dba7a6ec0a423a upstream. The return from the ftrace_stub, _mcount, ftrace_caller and return_to_handler functions is done with "br %r14" and "br %r1". These are indirect branches as well and need to use execute trampolines for CONFIG_EXPOLINE=y. The ftrace_caller function is a special case as it returns to the start of a function and may only use %r0 and %r1. For a pre z10 machine the standard execute trampoline uses a LARL + EX to do this, but this requires *two* registers in the range %r1..%r15. To get around this the 'br %r1' located in the lowcore is used, then the EX instruction does not need an address register. But the lowcore trick may only be used for pre z14 machines, with noexec=on the mapping for the first page may not contain instructions. The solution for that is an ALTERNATIVE in the expoline THUNK generated by 'GEN_BR_THUNK %r1' to switch to EXRL, this relies on the fact that a machine that supports noexec=on has EXRL as well. Cc: stable@vger.kernel.org # 4.16 Fixes: f19fbd5ed6 ("s390: introduce execute-trampolines for branches") Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

kdb: make "mdr" command repeat

2018-05-30T05:49:17Z

[ Upstream commit 1e0ce03bf142454f38a5fc050bf4fd698d2d36d8 ] The "mdr" command should repeat (continue) when only Enter/Return is pressed, so make it do so. Signed-off-by: Randy Dunlap Cc: Daniel Thompson Cc: Jason Wessel Cc: kgdb-bugreport@lists.sourceforge.net Signed-off-by: Jason Wessel Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Bluetooth: btusb: Add device ID for RTL8822BE

2018-05-30T05:49:17Z

[ Upstream commit fed03fe7e55b7dc16077f672bd9d7bbe92b3a691 ] The Asus Z370-I contains a Realtek RTL8822BE device with an associated BT chip using a USB ID of 0b05:185c. This device is added to the driver. Signed-off-by: Hon Weng Chong Signed-off-by: Larry Finger Signed-off-by: Marcel Holtmann Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ASoC: samsung: i2s: Ensure the RCLK rate is properly determined

2018-05-30T05:49:17Z

[ Upstream commit 647d04f8e07afc7c3b7a42b3ee01a8b28db29631 ] If the RCLK mux clock configuration is specified in DT and no set_sysclk() callback is used in the sound card driver the sclk_srcrate field will remain set to 0, leading to an incorrect PSR divider setting. To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock, so the actual RCLK mux selection is taken into account. Signed-off-by: Sylwester Nawrocki Acked-by: Krzysztof Kozlowski Signed-off-by: Mark Brown Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'

2018-05-30T05:49:17Z

[ Upstream commit 30966861a7a2051457be8c49466887d78cc47e97 ] If an unlikely failure in 'of_get_regulator_init_data()' occurs, we must release the reference on the current 'child' node before returning. Signed-off-by: Christophe JAILLET Signed-off-by: Mark Brown Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix frequency of Release WQE CQEs

2018-05-30T05:49:17Z

[ Upstream commit 04673e38f56b30cd39b1fa0f386137d818b17781 ] The driver controls when the hardware sends completions that communicate consumption of elements from the WQ. This is done by setting a WQEC bit on a WQE. The current driver sets it on every Nth WQE posting. However, the driver isn't clearing the bit if the WQE is reused. Thus, if the queue depth isn't evenly divisible by N, with enough time, it can be set on every element, creating a lot of overhead and risking CQ full conditions. Correct by clearing the bit when not setting it on an Nth element. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix soft lockup in lpfc worker thread during LIP testing

2018-05-30T05:49:17Z

[ Upstream commit 161df4f09987ae2e9f0f97f0b38eee298b4a39ff ] During link bounce testing in a point-to-point topology, the host may enter a soft lockup on the lpfc_worker thread: Call Trace: lpfc_work_done+0x1f3/0x1390 [lpfc] lpfc_do_work+0x16f/0x180 [lpfc] kthread+0xc7/0xe0 ret_from_fork+0x3f/0x70 The driver was simultaneously setting a combination of flags that caused lpfc_do_work()to effectively spin between slow path work and new event data, causing the lockup. Ensure in the typical wq completions, that new event data flags are set if the slow path flag is running. The slow path will eventually reschedule the wq handling. Signed-off-by: Dick Kennedy Signed-off-by: James Smart Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman