user/sven/linux.git, branch v4.4.159

Linux 4.4.159

2018-09-29T10:08:55Z

iw_cxgb4: only allow 1 flush on user qps

2018-09-29T10:08:55Z

commit 308aa2b8f7b7db3332a7d41099fd37851fb793b2 upstream. Once the qp has been flushed, it cannot be flushed again. The user qp flush logic wasn't enforcing it however. The bug can cause touch-after-free crashes like: Unable to handle kernel paging request for data at address 0x000001ec Faulting instruction address: 0xc008000016069100 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4] LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] Call Trace: [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4] [c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4] [c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core] [c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core] [c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm] [c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm] [c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm] [c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm] [c000000000444da4] __fput+0xe4/0x2f0 So fix flush_qp() to only flush the wq once. Cc: stable@vger.kernel.org Signed-off-by: Steve Wise Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

HID: sony: Support DS4 dongle

2018-09-29T10:08:54Z

commit de66a1a04c25f2560a8dca7a95e2a150b0d5e17e upstream. Add support for USB based DS4 dongle device, which allows connecting a DS4 through Bluetooth, but hides Bluetooth from the host system. Signed-off-by: Roderick Colenbrander Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

HID: sony: Update device ids

2018-09-29T10:08:54Z

commit cf1015d65d7c8a5504a4c03afb60fb86bff0f032 upstream. Support additional DS4 model. Signed-off-by: Roderick Colenbrander Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

arm64: Add trace_hardirqs_off annotation in ret_to_user

2018-09-29T10:08:54Z

commit db3899a6477a4dccd26cbfb7f408b6be2cc068e0 upstream. When a kernel is built with CONFIG_TRACE_IRQFLAGS the following warning is produced when entering userspace for the first time: WARNING: at /work/Linux/linux-2.6-aarch64/kernel/locking/lockdep.c:3519 Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc3+ #639 Hardware name: Juno (DT) task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000 PC is at check_flags.part.22+0x19c/0x1a8 LR is at check_flags.part.22+0x19c/0x1a8 pc : [] lr : [] pstate: 600001c5 sp : ffffffc9768abe10 x29: ffffffc9768abe10 x28: ffffffc9768a8000 x27: 0000000000000000 x26: 0000000000000001 x25: 00000000000000a6 x24: ffffffc00064be6c x23: ffffffc0009f249e x22: ffffffc9768a0000 x21: ffffffc97fea5480 x20: 00000000000001c0 x19: ffffffc00169a000 x18: 0000005558cc7b58 x17: 0000007fb78e3180 x16: 0000005558d2e238 x15: ffffffffffffffff x14: 0ffffffffffffffd x13: 0000000000000008 x12: 0101010101010101 x11: 7f7f7f7f7f7f7f7f x10: fefefefefefeff63 x9 : 7f7f7f7f7f7f7f7f x8 : 6e655f7371726964 x7 : 0000000000000001 x6 : ffffffc0001079c4 x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc001698438 x2 : 0000000000000000 x1 : ffffffc9768a0000 x0 : 000000000000002e Call trace: [] check_flags.part.22+0x19c/0x1a8 [] lock_is_held+0x80/0x98 [] __schedule+0x404/0x730 [] schedule+0x44/0xb8 [] ret_to_user+0x0/0x24 possible reason: unannotated irqs-off. irq event stamp: 502169 hardirqs last enabled at (502169): [] el0_irq_naked+0x1c/0x24 hardirqs last disabled at (502167): [] __do_softirq+0x17c/0x298 softirqs last enabled at (502168): [] __do_softirq+0x1fc/0x298 softirqs last disabled at (502143): [] irq_exit+0xa0/0xf0 This happens because we disable interrupts in ret_to_user before calling schedule() in work_resched. This patch adds the necessary trace_hardirqs_off annotation. Signed-off-by: Catalin Marinas Reported-by: Mark Rutland Cc: Will Deacon Signed-off-by: Will Deacon Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

ext4: don't mark mmp buffer head dirty

2018-09-29T10:08:54Z

commit fe18d649891d813964d3aaeebad873f281627fbc upstream. Marking mmp bh dirty before writing it will make writeback pick up mmp block later and submit a write, we don't want the duplicate write as kmmpd thread should have full control of reading and writing the mmp block. Another reason is we will also have random I/O error on the writeback request when blk integrity is enabled, because kmmpd could modify the content of the mmp block(e.g. setting new seq and time) while the mmp block is under I/O requested by writeback. Signed-off-by: Li Dongyang Signed-off-by: Theodore Ts'o Reviewed-by: Andreas Dilger Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: fix online resizing for bigalloc file systems with a 1k block size

2018-09-29T10:08:54Z

commit 5f8c10936fab2b69a487400f2872902e597dd320 upstream. An online resize of a file system with the bigalloc feature enabled and a 1k block size would be refused since ext4_resize_begin() did not understand s_first_data_block is 0 for all bigalloc file systems, even when the block size is 1k. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: fix online resize's handling of a too-small final block group

2018-09-29T10:08:54Z

commit f0a459dec5495a3580f8d784555e6f8f3bf7f263 upstream. Avoid growing the file system to an extent so that the last block group is too small to hold all of the metadata that must be stored in the block group. This problem can be triggered with the following reproducer: umount /mnt mke2fs -F -m0 -b 4096 -t ext4 -O resize_inode,^has_journal \ -E resize=1073741824 /tmp/foo.img 128M mount /tmp/foo.img /mnt truncate --size 1708M /tmp/foo.img resize2fs /dev/loop0 295400 umount /mnt e2fsck -fy /tmp/foo.img Reported-by: Torsten Hilbrich Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: recalucate superblock checksum after updating free blocks/inodes

2018-09-29T10:08:54Z

commit 4274f516d4bc50648a4d97e4f67ecbd7b65cde4a upstream. When mounting the superblock, ext4_fill_super() calculates the free blocks and free inodes and stores them in the superblock. It's not strictly necessary, since we don't use them any more, but it's nice to keep them roughly aligned to reality. Since it's not critical for file system correctness, the code doesn't call ext4_commit_super(). The problem is that it's in ext4_commit_super() that we recalculate the superblock checksum. So if we're not going to call ext4_commit_super(), we need to call ext4_superblock_csum_set() to make sure the superblock checksum is consistent. Most of the time, this doesn't matter, since we end up calling ext4_commit_super() very soon thereafter, and definitely by the time the file system is unmounted. However, it doesn't work in this sequence: mke2fs -Fq -t ext4 /dev/vdc 128M mount /dev/vdc /vdc cp xfstests/git-versions /vdc godown /vdc umount /vdc mount /dev/vdc tune2fs -l /dev/vdc With this commit, the "tune2fs -l" no longer fails. Reported-by: Chengguang Xu Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: avoid divide by zero fault when deleting corrupted inline directories

2018-09-29T10:08:53Z

commit 4d982e25d0bdc83d8c64e66fdeca0b89240b3b85 upstream. A specially crafted file system can trick empty_inline_dir() into reading past the last valid entry in a inline directory, and then run into the end of xattr marker. This will trigger a divide by zero fault. Fix this by using the size of the inline directory instead of dir->i_size. Also clean up error reporting in __ext4_check_dir_entry so that the message is clearer and more understandable --- and avoids the division by zero trap if the size passed in is zero. (I'm not sure why we coded it that way in the first place; printing offset % size is actually more confusing and less useful.) https://bugzilla.kernel.org/show_bug.cgi?id=200933 Signed-off-by: Theodore Ts'o Reported-by: Wen Xu Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman