user/sven/linux.git, branch v4.4.230

Linux 4.4.230

2020-07-09T07:35:09Z

netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6

2020-07-09T07:35:09Z

Could you please push this patch into stable@? it fixes memory corruption in kernels v3.5 .. v4.10 Lost .data_len definition leads to write beyond end of struct nf_ct_h323_master. Usually it corrupts following struct nf_conn_nat, however if nat is not loaded it corrupts following slab object. In mainline this problem went away in v4.11, after commit 9f0f3ebeda47 ("netfilter: helpers: remove data_len usage for inkernel helpers") however many stable kernels are still affected. Fixes: 1afc56794e03 ("netfilter: nf_ct_helper: implement variable length helper private data") # v3.5 cc: stable@vger.kernel.org Reviewed-by: Florian Westphal Signed-off-by: Vasily Averin Signed-off-by: Greg Kroah-Hartman

MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen

2020-07-09T07:35:09Z

commit fcec538ef8cca0ad0b84432235dccd9059c8e6f8 upstream. This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd935c34b ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by: Hauke Mehrtens Cc: Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

cifs: Fix the target file was deleted when rename failed.

2020-07-09T07:35:09Z

commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2 upstream. When xfstest generic/035, we found the target file was deleted if the rename return -EACESS. In cifs_rename2, we unlink the positive target dentry if rename failed with EACESS or EEXIST, even if the target dentry is positived before rename. Then the existing file was deleted. We should just delete the target file which created during the rename. Reported-by: Hulk Robot Signed-off-by: Zhang Xiaoxu Cc: stable@vger.kernel.org Signed-off-by: Steve French Reviewed-by: Aurelien Aptel Signed-off-by: Greg Kroah-Hartman

SMB3: Honor persistent/resilient handle flags for multiuser mounts

2020-07-09T07:35:09Z

commit 00dfbc2f9c61185a2e662f27c45a0bb29b2a134f upstream. Without this: - persistent handles will only be enabled for per-user tcons if the server advertises the 'Continuous Availabity' capability - resilient handles would never be enabled for per-user tcons Signed-off-by: Paul Aurich CC: Stable Signed-off-by: Steve French Reviewed-by: Aurelien Aptel Signed-off-by: Greg Kroah-Hartman

SMB3: Honor 'seal' flag for multiuser mounts

2020-07-09T07:35:09Z

commit cc15461c73d7d044d56c47e869a215e49bd429c8 upstream. Ensure multiuser SMB3 mounts use encryption for all users' tcons if the mount options are configured to require encryption. Without this, only the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user tcons would only be encrypted if the server was configured to require encryption. Signed-off-by: Paul Aurich CC: Stable Signed-off-by: Steve French Reviewed-by: Aurelien Aptel Signed-off-by: Greg Kroah-Hartman

Revert "ALSA: usb-audio: Improve frames size computation"

2020-07-09T07:35:09Z

This reverts commit 02c56650f3c118d3752122996d96173d26bb13aa which is commit f0bd62b64016508938df9babe47f65c2c727d25c upstream. It causes a number of reported issues and a fix for it has not hit Linus's tree yet. Revert this to resolve those problems. Cc: Alexander Tsoy Cc: Takashi Iwai Cc: Sasha Levin Cc: Hans de Goede Signed-off-by: Greg Kroah-Hartman

i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665

2020-07-09T07:35:08Z

[ Upstream commit cd217f2300793a106b49c7dfcbfb26e348bc7593 ] The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck low, this differs to the PCA9564 which uses 90h for this indication. Treat either 0x78 or 0x90 as an indication that the SCL line is stuck. Based on looking through the PCA9564 and PCA9665 datasheets this should be safe for both chips. The PCA9564 should not return 0x78 for any valid state and the PCA9665 should not return 0x90. Fixes: eff9ec95efaa ("i2c-algo-pca: Add PCA9665 support") Signed-off-by: Chris Packham Reviewed-by: Andy Shevchenko Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

virtio-blk: free vblk-vqs in error path of virtblk_probe()

2020-07-09T07:35:08Z

[ Upstream commit e7eea44eefbdd5f0345a0a8b80a3ca1c21030d06 ] Else there will be memory leak if alloc_disk() fails. Fixes: 6a27b656fc02 ("block: virtio-blk: support multi virt queues per virtio-blk device") Signed-off-by: Hou Tao Reviewed-by: Stefano Garzarella Reviewed-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()

2020-07-09T07:35:08Z

[ Upstream commit 8b97f9922211c44a739c5cbd9502ecbb9f17f6d1 ] Although it rarely happens, we should call free_capabilities() if error happens after read_capabilities() to free allocated strings. Fixes: de584afa5e188 ("hwmon driver for ACPI 4.0 power meters") Signed-off-by: Misono Tomohiro Link: https://lore.kernel.org/r/20200625043242.31175-1-misono.tomohiro@jp.fujitsu.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin