<feed xmlns='http://www.w3.org/2005/Atom'>
<title>user/sven/linux.git, branch v4.4.251</title>
<subtitle>Linux Kernel
</subtitle>
<id>https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v4.4.251</id>
<link rel='self' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v4.4.251'/>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/'/>
<updated>2021-01-12T18:47:57Z</updated>
<entry>
<title>Linux 4.4.251</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>Greg Kroah-Hartman</name>
<email>gregkh@linuxfoundation.org</email>
</author>
<published>2021-01-12T18:47:57Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=5df68d9462bf3c64c9a788faee26b259c3fbf896'/>
<id>urn:sha1:5df68d9462bf3c64c9a788faee26b259c3fbf896</id>
<content type='text'>
Tested-by: Jon Hunter &lt;jonathanh@nvidia.com&gt;
Tested-by: Pavel Machek (CIP) &lt;pavel@denx.de&gt;
Tested-by: Guenter Roeck &lt;linux@roeck-us.net&gt;
Tested-by: Shuah Khan &lt;skhan@linuxfoundation.org&gt;
Tested-by: Linux Kernel Functional Testing &lt;lkft@linaro.org&gt;
Link: https://lore.kernel.org/r/20210111130032.469630231@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>x86/mtrr: Correct the range check before performing MTRR type lookups</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>Ying-Tsun Huang</name>
<email>ying-tsun.huang@amd.com</email>
</author>
<published>2020-12-15T07:07:20Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=2a6e3494fdcb446701129a6a116ac5e5cbff53d6'/>
<id>urn:sha1:2a6e3494fdcb446701129a6a116ac5e5cbff53d6</id>
<content type='text'>
commit cb7f4a8b1fb426a175d1708f05581939c61329d4 upstream.

In mtrr_type_lookup(), if the input memory address region is not in the
MTRR, over 4GB, and not over the top of memory, a write-back attribute
is returned. These condition checks are for ensuring the input memory
address region is actually mapped to the physical memory.

However, if the end address is just aligned with the top of memory,
the condition check treats the address is over the top of memory, and
write-back attribute is not returned.

And this hits in a real use case with NVDIMM: the nd_pmem module tries
to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a
NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes
very low since it is aligned with the top of memory and its memory type
is uncached-minus.

Move the input end address change to inclusive up into
mtrr_type_lookup(), before checking for the top of memory in either
mtrr_type_lookup_{variable,fixed}() helpers.

 [ bp: Massage commit message. ]

Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()")
Signed-off-by: Ying-Tsun Huang &lt;ying-tsun.huang@amd.com&gt;
Signed-off-by: Borislav Petkov &lt;bp@suse.de&gt;
Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>netfilter: xt_RATEEST: reject non-null terminated string from userspace</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>Florian Westphal</name>
<email>fw@strlen.de</email>
</author>
<published>2020-12-22T22:23:56Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=281f099c5b45214760f6ea1ff958e24505602250'/>
<id>urn:sha1:281f099c5b45214760f6ea1ff958e24505602250</id>
<content type='text'>
commit 6cb56218ad9e580e519dcd23bfb3db08d8692e5a upstream.

syzbot reports:
detected buffer overflow in strlen
[..]
Call Trace:
 strlen include/linux/string.h:325 [inline]
 strlcpy include/linux/string.h:348 [inline]
 xt_rateest_tg_checkentry+0x2a5/0x6b0 net/netfilter/xt_RATEEST.c:143

strlcpy assumes src is a c-string. Check info-&gt;name before its used.

Reported-by: syzbot+e86f7c428c8c50db65b4@syzkaller.appspotmail.com
Fixes: 5859034d7eb8793 ("[NETFILTER]: x_tables: add RATEEST target")
Signed-off-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>netfilter: ipset: fix shift-out-of-bounds in htable_bits()</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>Vasily Averin</name>
<email>vvs@virtuozzo.com</email>
</author>
<published>2020-12-17T14:53:18Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=e59c413e8b46ff122f31649b6d3d767e3f1c532d'/>
<id>urn:sha1:e59c413e8b46ff122f31649b6d3d767e3f1c532d</id>
<content type='text'>
commit 5c8193f568ae16f3242abad6518dc2ca6c8eef86 upstream.

htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds

UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 8498 Comm: syz-executor519
 Not tainted 5.10.0-rc7-next-20201208-syzkaller #0
Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline]
 hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524
 ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115
 nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600
 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
 netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2345
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2399
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2432
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

This patch replaces htable_bits() by simple fls(hashsize - 1) call:
it alone returns valid nbits both for round and non-round hashsizes.
It is normal to set any nbits here because it is validated inside
following htable_size() call which returns 0 for nbits&gt;31.

Fixes: 1feab10d7e6d("netfilter: ipset: Unified hash type generation")
Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin &lt;vvs@virtuozzo.com&gt;
Acked-by: Jozsef Kadlecsik &lt;kadlec@netfilter.org&gt;
Signed-off-by: Pablo Neira Ayuso &lt;pablo@netfilter.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>Revert "device property: Keep secondary firmware node secondary by type"</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>Bard Liao</name>
<email>yung-chuan.liao@linux.intel.com</email>
</author>
<published>2021-01-05T09:11:45Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=adf61692831e570e7a3a336394b7bb92ca346f8e'/>
<id>urn:sha1:adf61692831e570e7a3a336394b7bb92ca346f8e</id>
<content type='text'>
commit 47f4469970d8861bc06d2d4d45ac8200ff07c693 upstream.

While commit d5dcce0c414f ("device property: Keep secondary firmware
node secondary by type") describes everything correct in its commit
message, the change it made does the opposite and original commit
c15e1bdda436 ("device property: Fix the secondary firmware node handling
in set_primary_fwnode()") was fully correct.

Revert the former one here and improve documentation in the next patch.

Fixes: d5dcce0c414f ("device property: Keep secondary firmware node secondary by type")
Signed-off-by: Bard Liao &lt;yung-chuan.liao@linux.intel.com&gt;
Reviewed-by: Andy Shevchenko &lt;andriy.shevchenko@linux.intel.com&gt;
Reviewed-by: Heikki Krogerus &lt;heikki.krogerus@linux.intel.com&gt;
Cc: 5.10+ &lt;stable@vger.kernel.org&gt; # 5.10+
Signed-off-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>ALSA: hda/conexant: add a new hda codec CX11970</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>bo liu</name>
<email>bo.liu@senarytech.com</email>
</author>
<published>2020-12-29T03:52:26Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=115db8c49d972f86349aa35965885b0bcda340a5'/>
<id>urn:sha1:115db8c49d972f86349aa35965885b0bcda340a5</id>
<content type='text'>
commit 744a11abc56405c5a106e63da30a941b6d27f737 upstream.

The current kernel does not support the cx11970 codec chip.
Add a codec configuration item to kernel.

[ Minor coding style fix by tiwai ]

Signed-off-by: bo liu &lt;bo.liu@senarytech.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>x86/mm: Fix leak of pmd ptlock</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>Dan Williams</name>
<email>dan.j.williams@intel.com</email>
</author>
<published>2020-12-03T06:28:12Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=46a8a1f14584831a7271fb2eaeb717a213b49c01'/>
<id>urn:sha1:46a8a1f14584831a7271fb2eaeb717a213b49c01</id>
<content type='text'>
commit d1c5246e08eb64991001d97a3bd119c93edbc79a upstream.

Commit

  28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")

introduced a new location where a pmd was released, but neglected to
run the pmd page destructor. In fact, this happened previously for a
different pmd release path and was fixed by commit:

  c283610e44ec ("x86, mm: do not leak page-&gt;ptl for pmd page tables").

This issue was hidden until recently because the failure mode is silent,
but commit:

  b2b29d6d0119 ("mm: account PMD tables like PTE tables")

turns the failure mode into this signature:

 BUG: Bad page state in process lt-pmem-ns  pfn:15943d
 page:000000007262ed7b refcount:0 mapcount:-1024 mapping:0000000000000000 index:0x0 pfn:0x15943d
 flags: 0xaffff800000000()
 raw: 00affff800000000 dead000000000100 0000000000000000 0000000000000000
 raw: 0000000000000000 ffff913a029bcc08 00000000fffffbff 0000000000000000
 page dumped because: nonzero mapcount
 [..]
  dump_stack+0x8b/0xb0
  bad_page.cold+0x63/0x94
  free_pcp_prepare+0x224/0x270
  free_unref_page+0x18/0xd0
  pud_free_pmd_page+0x146/0x160
  ioremap_pud_range+0xe3/0x350
  ioremap_page_range+0x108/0x160
  __ioremap_caller.constprop.0+0x174/0x2b0
  ? memremap+0x7a/0x110
  memremap+0x7a/0x110
  devm_memremap+0x53/0xa0
  pmem_attach_disk+0x4ed/0x530 [nd_pmem]
  ? __devm_release_region+0x52/0x80
  nvdimm_bus_probe+0x85/0x210 [libnvdimm]

Given this is a repeat occurrence it seemed prudent to look for other
places where this destructor might be missing and whether a better
helper is needed. try_to_free_pmd_page() looks like a candidate, but
testing with setting up and tearing down pmd mappings via the dax unit
tests is thus far not triggering the failure.

As for a better helper pmd_free() is close, but it is a messy fit
due to requiring an @mm arg. Also, ___pmd_free_tlb() wants to call
paravirt_tlb_remove_table() instead of free_page(), so open-coded
pgtable_pmd_page_dtor() seems the best way forward for now.

Debugged together with Matthew Wilcox &lt;willy@infradead.org&gt;.

Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: Dan Williams &lt;dan.j.williams@intel.com&gt;
Signed-off-by: Borislav Petkov &lt;bp@suse.de&gt;
Tested-by: Yi Zhang &lt;yi.zhang@redhat.com&gt;
Acked-by: Peter Zijlstra (Intel) &lt;peterz@infradead.org&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Link: https://lkml.kernel.org/r/160697689204.605323.17629854984697045602.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>USB: serial: keyspan_pda: remove unused variable</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>Johan Hovold</name>
<email>johan@kernel.org</email>
</author>
<published>2021-01-08T14:55:28Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=460ebb463c9a5c015bffa4233dac0cde57d34507'/>
<id>urn:sha1:460ebb463c9a5c015bffa4233dac0cde57d34507</id>
<content type='text'>
Remove an unused variable which was mistakingly left by commit
37faf5061541 ("USB: serial: keyspan_pda: fix write-wakeup
use-after-free") and only removed by a later change.

This is needed to suppress a W=1 warning about the unused variable in
the stable trees that the build bots triggers.

Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Signed-off-by: Johan Hovold &lt;johan@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
</entry>
<entry>
<title>usb: gadget: configfs: Preserve function ordering after bind failure</title>
<updated>2021-01-12T18:47:57Z</updated>
<author>
<name>Chandana Kishori Chiluveru</name>
<email>cchiluve@codeaurora.org</email>
</author>
<published>2020-12-29T22:44:43Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=c65fea738a5f9c7ceaf5f0fac224e35478a8818d'/>
<id>urn:sha1:c65fea738a5f9c7ceaf5f0fac224e35478a8818d</id>
<content type='text'>
commit 6cd0fe91387917be48e91385a572a69dfac2f3f7 upstream.

When binding the ConfigFS gadget to a UDC, the functions in each
configuration are added in list order. However, if usb_add_function()
fails, the failed function is put back on its configuration's
func_list and purge_configs_funcs() is called to further clean up.

purge_configs_funcs() iterates over the configurations and functions
in forward order, calling unbind() on each of the previously added
functions. But after doing so, each function gets moved to the
tail of the configuration's func_list. This results in reshuffling
the original order of the functions within a configuration such
that the failed function now appears first even though it may have
originally appeared in the middle or even end of the list. At this
point if the ConfigFS gadget is attempted to re-bind to the UDC,
the functions will be added in a different order than intended,
with the only recourse being to remove and relink the functions all
over again.

An example of this as follows:

ln -s functions/mass_storage.0 configs/c.1
ln -s functions/ncm.0 configs/c.1
ln -s functions/ffs.adb configs/c.1	# oops, forgot to start adbd
echo "&lt;udc device&gt;" &gt; UDC		# fails
start adbd
echo "&lt;udc device&gt;" &gt; UDC		# now succeeds, but...
					# bind order is
					# "ADB", mass_storage, ncm

[30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520
[30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520
[30133.119974] using random self ethernet address
[30133.120002] using random host ethernet address
[30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26
[30133.140015] usb0: MAC 6e:28:7e:42:66:6a
[30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520
[30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --&gt; -19
[30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200
[30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00
[30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19
[30136.661933] init: starting service 'adbd'...
[30136.700126] read descriptors
[30136.700413] read strings
[30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520
[30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520
[30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520
[30138.575631] using random self ethernet address
[30138.575660] using random host ethernet address
[30138.595338] usb0: HOST MAC 2e:cf:43:cd:ca:c8
[30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0
[30138.791490] configfs-gadget gadget: super-speed config #1: c

Fix this by reversing the iteration order of the functions in
purge_config_funcs() when unbinding them, and adding them back to
the config's func_list at the head instead of the tail. This
ensures that we unbind and unwind back to the original list order.

Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Chandana Kishori Chiluveru &lt;cchiluve@codeaurora.org&gt;
Signed-off-by: Jack Pham &lt;jackp@codeaurora.org&gt;
Reviewed-by: Peter Chen &lt;peter.chen@nxp.com&gt;
Link: https://lore.kernel.org/r/20201229224443.31623-1-jackp@codeaurora.org
Cc: stable &lt;stable@vger.kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
<entry>
<title>usb: gadget: Fix spinlock lockup on usb_function_deactivate</title>
<updated>2021-01-12T18:47:56Z</updated>
<author>
<name>Sriharsha Allenki</name>
<email>sallenki@codeaurora.org</email>
</author>
<published>2020-12-02T13:02:20Z</published>
<link rel='alternate' type='text/html' href='https://git.stealer.net/cgit.cgi/user/sven/linux.git/commit/?id=efe368207643ee5fe68533391a8cfe84099d4a6d'/>
<id>urn:sha1:efe368207643ee5fe68533391a8cfe84099d4a6d</id>
<content type='text'>
commit 5cc35c224a80aa5a5a539510ef049faf0d6ed181 upstream.

There is a spinlock lockup as part of composite_disconnect
when it tries to acquire cdev-&gt;lock as part of usb_gadget_deactivate.
This is because the usb_gadget_deactivate is called from
usb_function_deactivate with the same spinlock held.

This would result in the below call stack and leads to stall.

rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu:     3-...0: (1 GPs behind) idle=162/1/0x4000000000000000
softirq=10819/10819 fqs=2356
 (detected by 2, t=5252 jiffies, g=20129, q=3770)
 Task dump for CPU 3:
 task:uvc-gadget_wlhe state:R  running task     stack:    0 pid:  674 ppid:
 636 flags:0x00000202
 Call trace:
  __switch_to+0xc0/0x170
  _raw_spin_lock_irqsave+0x84/0xb0
  composite_disconnect+0x28/0x78
  configfs_composite_disconnect+0x68/0x70
  usb_gadget_disconnect+0x10c/0x128
  usb_gadget_deactivate+0xd4/0x108
  usb_function_deactivate+0x6c/0x80
  uvc_function_disconnect+0x20/0x58
  uvc_v4l2_release+0x30/0x88
  v4l2_release+0xbc/0xf0
  __fput+0x7c/0x230
  ____fput+0x14/0x20
  task_work_run+0x88/0x140
  do_notify_resume+0x240/0x6f0
  work_pending+0x8/0x200

Fix this by doing an unlock on cdev-&gt;lock before the usb_gadget_deactivate
call from usb_function_deactivate.

The same lockup can happen in the usb_gadget_activate path. Fix that path
as well.

Reported-by: Peter Chen &lt;peter.chen@nxp.com&gt;
Link: https://lore.kernel.org/linux-usb/20201102094936.GA29581@b29397-desktop/
Tested-by: Peter Chen &lt;peter.chen@nxp.com&gt;
Signed-off-by: Sriharsha Allenki &lt;sallenki@codeaurora.org&gt;
Cc: stable &lt;stable@vger.kernel.org&gt;
Link: https://lore.kernel.org/r/20201202130220.24926-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
</entry>
</feed>
