user/sven/linux.git, branch v4.4.266

Linux 4.4.266

2021-04-10T11:01:58Z

Tested-by: Guenter Roeck Tested-by: Jason Self Tested-by: Linux Kernel Functional Testing Link: https://lore.kernel.org/r/20210409095259.957388690@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

can: flexcan: flexcan_chip_freeze(): fix chip freeze for missing bitrate

2021-04-10T11:01:58Z

commit 47c5e474bc1e1061fb037d13b5000b38967eb070 upstream. For cases when flexcan is built-in, bitrate is still not set at registering. So flexcan_chip_freeze() generates: [ 1.860000] *** ZERO DIVIDE *** FORMAT=4 [ 1.860000] Current process id is 1 [ 1.860000] BAD KERNEL TRAP: 00000000 [ 1.860000] PC: [<402e70c8>] flexcan_chip_freeze+0x1a/0xa8 To allow chip freeze, using an hardcoded timeout when bitrate is still not set. Fixes: ec15e27cc890 ("can: flexcan: enable RX FIFO after FRZ/HALT valid") Link: https://lore.kernel.org/r/20210315231510.650593-1-angelo@kernel-space.org Signed-off-by: Angelo Dureghello [mkl: use if instead of ? operator] Signed-off-by: Marc Kleine-Budde Cc: Koen Vandeputte Signed-off-by: Greg Kroah-Hartman

init/Kconfig: make COMPILE_TEST depend on HAS_IOMEM

2021-04-10T11:01:58Z

commit ea29b20a828511de3348334e529a3d046a180416 upstream. I read the commit log of the following two: - bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML") - 334ef6ed06fa ("init/Kconfig: make COMPILE_TEST depend on !S390") Both are talking about HAS_IOMEM dependency missing in many drivers. So, 'depends on HAS_IOMEM' seems the direct, sensible solution to me. This does not change the behavior of UML. UML still cannot enable COMPILE_TEST because it does not provide HAS_IOMEM. The current dependency for S390 is too strong. Under the condition of CONFIG_PCI=y, S390 provides HAS_IOMEM, hence can enable COMPILE_TEST. I also removed the meaningless 'default n'. Link: https://lkml.kernel.org/r/20210224140809.1067582-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada Cc: Heiko Carstens Cc: Guenter Roeck Cc: Arnd Bergmann Cc: Kees Cook Cc: Daniel Borkmann Cc: Johannes Weiner Cc: KP Singh Cc: Nathan Chancellor Cc: Nick Terrell Cc: Quentin Perret Cc: Valentin Schneider Cc: "Enrico Weigelt, metux IT consult" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

init/Kconfig: make COMPILE_TEST depend on !S390

2021-04-10T11:01:58Z

commit 334ef6ed06fa1a54e35296b77b693bcf6d63ee9e upstream. While allmodconfig and allyesconfig build for s390 there are also various bots running compile tests with randconfig, where PCI is disabled. This reveals that a lot of drivers should actually depend on HAS_IOMEM. Adding this to each device driver would be a never ending story, therefore just disable COMPILE_TEST for s390. The reasoning is more or less the same as described in commit bc083a64b6c0 ("init/Kconfig: make COMPILE_TEST depend on !UML"). Reported-by: kernel test robot Suggested-by: Arnd Bergmann Signed-off-by: Heiko Carstens Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

init/Kconfig: make COMPILE_TEST depend on !UML

2021-04-10T11:01:58Z

commit bc083a64b6c035135c0f80718f9e9192cc0867c6 upstream. UML is a bit special since it does not have iomem nor dma. That means a lot of drivers will not build if they miss a dependency on HAS_IOMEM. s390 used to have the same issues but since it gained PCI support UML is the only stranger. We are tired of patching dozens of new drivers after every merge window just to un-break allmod/yesconfig UML builds. One could argue that a decent driver has to know on what it depends and therefore a missing HAS_IOMEM dependency is a clear driver bug. But the dependency not obvious and not everyone does UML builds with COMPILE_TEST enabled when developing a device driver. A possible solution to make these builds succeed on UML would be providing stub functions for ioremap() and friends which fail upon runtime. Another one is simply disabling COMPILE_TEST for UML. Since it is the least hassle and does not force use to fake iomem support let's do the latter. Link: http://lkml.kernel.org/r/1466152995-28367-1-git-send-email-richard@nod.at Signed-off-by: Richard Weinberger Acked-by: Arnd Bergmann Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

tracing: Add a vmalloc_sync_mappings() for safe measure

2021-04-10T11:01:58Z

commit 11f5efc3ab66284f7aaacc926e9351d658e2577b upstream x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu areas can be complex, to say the least. Mappings may happen at boot up, and if nothing synchronizes the page tables, those page mappings may not be synced till they are used. This causes issues for anything that might touch one of those mappings in the path of the page fault handler. When one of those unmapped mappings is touched in the page fault handler, it will cause another page fault, which in turn will cause a page fault, and leave us in a loop of page faults. Commit 763802b53a42 ("x86/mm: split vmalloc_sync_all()") split vmalloc_sync_all() into vmalloc_sync_unmappings() and vmalloc_sync_mappings(), as on system exit, it did not need to do a full sync on x86_64 (although it still needed to be done on x86_32). By chance, the vmalloc_sync_all() would synchronize the page mappings done at boot up and prevent the per cpu area from being a problem for tracing in the page fault handler. But when that synchronization in the exit of a task became a nop, it caused the problem to appear. Link: https://lore.kernel.org/r/20200429054857.66e8e333@oasis.local.home Cc: stable@vger.kernel.org Fixes: 737223fbca3b1 ("tracing: Consolidate buffer allocation code") Reported-by: "Tzvetomir Stoyanov (VMware)" Suggested-by: Joerg Roedel Signed-off-by: Steven Rostedt (VMware) [sudip: add header] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: diskonchip: Fix the probe error path

2021-04-10T11:01:58Z

commit c5be12e45940f1aa1b5dfa04db5d15ad24f7c896 upstream Not sure nand_cleanup() is the right function to call here but in any case it is not nand_release(). Indeed, even a comment says that calling nand_release() is a bit of a hack as there is no MTD device to unregister. So switch to nand_cleanup() for now and drop this comment. There is no Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if it did not intruce any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-13-miquel.raynal@bootlin.com [sudip: manual backport to old file] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: orion: Fix the probe error path

2021-04-10T11:01:58Z

commit be238fbf78e4c7c586dac235ab967d3e565a4d1a upstream nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-34-miquel.raynal@bootlin.com [sudip: manual backport to old file] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: pasemi: Fix the probe error path

2021-04-10T11:01:58Z

commit f51466901c07e6930435d30b02a21f0841174f61 upstream nand_cleanup() is supposed to be called on error after a successful call to nand_scan() to free all NAND resources. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible, hence pointing it as the commit to fix for backporting purposes, even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-41-miquel.raynal@bootlin.com [sudip: manual backport to old file] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

mtd: rawnand: plat_nand: Fix the probe error path

2021-04-10T11:01:58Z

commit 5284024b4dac5e94f7f374ca905c7580dbc455e9 upstream nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible, hence pointing it as the commit to fix for backporting purposes, even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-43-miquel.raynal@bootlin.com [sudip: manual backport to old file] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman