user/sven/linux.git, branch v4.9.141

Linux 4.9.141

2018-11-27T15:09:42Z

libceph: fall back to sendmsg for slab pages

2018-11-27T15:09:42Z

commit 7e241f647dc7087a0401418a187f3f5b527cc690 upstream. skb_can_coalesce() allows coalescing neighboring slab objects into a single frag: return page == skb_frag_page(frag) && off == frag->page_offset + skb_frag_size(frag); ceph_tcp_sendpage() can be handed slab pages. One example of this is XFS: it passes down sector sized slab objects for its metadata I/O. If the kernel client is co-located on the OSD node, the skb may go through loopback and pop on the receive side with the exact same set of frags. When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy complains because the size exceeds the object's allocated size: usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes) Although skb_can_coalesce() could be taught to return false if the resulting frag would cross a slab object boundary, we already have a fallback for non-refcounted pages. Utilize it for slab pages too. Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Ilya Dryomov Signed-off-by: Greg Kroah-Hartman

HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges

2018-11-27T15:09:42Z

commit 8c01db7619f07c85c5cd81ec5eb83608b56c88f5 upstream. When a UHID_CREATE command is written to the uhid char device, a copy_from_user() is done from a user pointer embedded in the command. When the address limit is KERNEL_DS, e.g. as is the case during sys_sendfile(), this can read from kernel memory. Alternatively, information can be leaked from a setuid binary that is tricked to write to the file descriptor. Therefore, forbid UHID_CREATE in these cases. No other commands in uhid_char_write() are affected by this bug and UHID_CREATE is marked as "obsolete", so apply the restriction to UHID_CREATE only rather than to uhid_char_write() entirely. Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to Jann Horn for commit 9da3f2b740544 ("x86/fault: BUG() when uaccess helpers fault on kernel addresses"), allowing this bug to be found. Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com Fixes: d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events") Cc: # v3.6+ Cc: Jann Horn Cc: Andy Lutomirski Signed-off-by: Eric Biggers Reviewed-by: Jann Horn Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

new helper: uaccess_kernel()

2018-11-27T15:09:41Z

commit db68ce10c4f0a27c1ff9fa0e789e5c41f8c4ea63 upstream. Signed-off-by: Al Viro [only take the include/linux/uaccess.h portion - gregkh] Signed-off-by: Greg Kroah-Hartman

ACPI / platform: Add SMB0001 HID to forbidden_id_list

2018-11-27T15:09:41Z

commit 2bbb5fa37475d7aa5fa62f34db1623f3da2dfdfa upstream. Many HP AMD based laptops contain an SMB0001 device like this: Device (SMBD) { Name (_HID, "SMB0001") // _HID: Hardware ID Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings { IO (Decode16, 0x0B20, // Range Minimum 0x0B20, // Range Maximum 0x20, // Alignment 0x20, // Length ) IRQ (Level, ActiveLow, Shared, ) {7} }) } The legacy style IRQ resource here causes acpi_dev_get_irqresource() to be called with legacy=true and this message to show in dmesg: ACPI: IRQ 7 override to edge, high This causes issues when later on the AMD0030 GPIO device gets enumerated: Device (GPIO) { Name (_HID, "AMDI0030") // _HID: Hardware ID Name (_CID, "AMDI0030") // _CID: Compatible ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, ) { 0x00000007, } Memory32Fixed (ReadWrite, 0xFED81500, // Address Base 0x00000400, // Address Length ) }) Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */ } } Now acpi_dev_get_irqresource() gets called with legacy=false, but because of the earlier override of the trigger-type acpi_register_gsi() returns -EBUSY (because we try to register the same interrupt with a different trigger-type) and we end up setting IORESOURCE_DISABLED in the flags. The setting of IORESOURCE_DISABLED causes platform_get_irq() to call acpi_irq_get() which is not implemented on x86 and returns -EINVAL. resulting in the following in dmesg: amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22 amd_gpio: probe of AMDI0030:00 failed with error -22 The SMB0001 is a "virtual" device in the sense that the only way the OS interacts with it is through calling a couple of methods to do SMBus transfers. As such it is weird that it has IO and IRQ resources at all, because the driver for it is not expected to ever access the hardware directly. The Linux driver for the SMB0001 device directly binds to the acpi_device through the acpi_bus, so we do not need to instantiate a platform_device for this ACPI device. This commit adds the SMB0001 HID to the forbidden_id_list, avoiding the instantiating of a platform_device for it. Not instantiating a platform_device means we will no longer call acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of the AMDI0030 device failing. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523 Reported-by: Lukas Kahnert Tested-by: Marc Cc: All applicable Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

drivers/misc/sgi-gru: fix Spectre v1 vulnerability

2018-11-27T15:09:41Z

commit fee05f455ceb5c670cbe48e2f9454ebc4a388554 upstream. req.gid can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: vers/misc/sgi-gru/grukdump.c:200 gru_dump_chiplet_request() warn: potential spectre issue 'gru_base' [w] Fix this by sanitizing req.gid before calling macro GID_TO_GRU, which uses it to index gru_base. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Greg Kroah-Hartman

USB: misc: appledisplay: add 20" Apple Cinema Display

2018-11-27T15:09:41Z

commit f6501f49199097b99e4e263644d88c90d1ec1060 upstream. Add another Apple Cinema Display to the list of supported displays Signed-off-by: Mattias Jacobsson <2pi@mok.nu> Cc: stable Signed-off-by: Greg Kroah-Hartman

misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data

2018-11-27T15:09:41Z

commit 7c97301285b62a41d6bceded7d964085fc8cc50f upstream. After building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from the function ssc_probe() to the function .init.text:atmel_ssc_get_driver_data() The function ssc_probe() references the function __init atmel_ssc_get_driver_data(). This is often because ssc_probe lacks a __init annotation or the annotation of atmel_ssc_get_driver_data is wrong. Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch. Signed-off-by: Nathan Chancellor Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB

2018-11-27T15:09:41Z

commit a77112577667cbda7c6292c52d909636aef31fd9 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Dmesg output: usb 1-6: string descriptor 0 read error: -110 usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: can't set config #1, error -110 Signed-off-by: Emmanuel Pescosta Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: quirks: Add no-lpm quirk for Raydium touchscreens

2018-11-27T15:09:41Z

commit deefd24228a172d1b27d4a9adbfd2cdacd60ae64 upstream. Raydium USB touchscreen fails to set config if LPM is enabled: [ 2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119 [ 2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.030660] usb 1-8: Product: Raydium Touch System [ 2.030661] usb 1-8: Manufacturer: Raydium Corporation [ 7.132209] usb 1-8: can't set config #1, error -110 Same behavior can be observed on 2386:3114. Raydium claims the touchscreen supports LPM under Windows, so I used Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows that the LPM doesn't work under Windows, either. So let's just disable LPM for Raydium touchscreens. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools Signed-off-by: Kai-Heng Feng Cc: stable Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman