user/sven/linux.git, branch v4.9.158

Linux 4.9.158

2019-02-15T08:07:33Z

Revert "exec: load_script: don't blindly truncate shebang string"

2019-02-15T08:07:33Z

commit cb5b020a8d38f77209d0472a0fea755299a8ec78 upstream. This reverts commit 8099b047ecc431518b9bb6bdbba3549bbecdc343. It turns out that people do actually depend on the shebang string being truncated, and on the fact that an interpreter (like perl) will often just re-interpret it entirely to get the full argument list. Reported-by: Samuel Dionne-Riel Acked-by: Kees Cook Cc: Oleg Nesterov Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Linux 4.9.157

2019-02-15T07:07:39Z

batman-adv: Force mac header to start of data on xmit

2019-02-15T07:07:39Z

commit 9114daa825fc3f335f9bea3313ce667090187280 upstream. The caller of ndo_start_xmit may not already have called skb_reset_mac_header. The returned value of skb_mac_header/eth_hdr therefore can be in the wrong position and even outside the current skbuff. This for example happens when the user binds to the device using a PF_PACKET-SOCK_RAW with enabled qdisc-bypass: int opt = 4; setsockopt(sock, SOL_PACKET, PACKET_QDISC_BYPASS, &opt, sizeof(opt)); Since eth_hdr is used all over the codebase, the batadv_interface_tx function must always take care of resetting it. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Reported-by: syzbot+9d7405c7faa390e60b4e@syzkaller.appspotmail.com Reported-by: syzbot+7d20bc3f1ddddc0f9079@syzkaller.appspotmail.com Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman

batman-adv: Avoid WARN on net_device without parent in netns

2019-02-15T07:07:39Z

commit 955d3411a17f590364238bd0d3329b61f20c1cd2 upstream. It is not allowed to use WARN* helpers on potential incorrect input from the user or transient problems because systems configured as panic_on_warn will reboot due to such a problem. A NULL return value of __dev_get_by_index can be caused by various problems which can either be related to the system configuration or problems (incorrectly returned network namespaces) in other (virtual) net_device drivers. batman-adv should not cause a (harmful) WARN in this situation and instead only report it via a simple message. Fixes: b7eddd0b3950 ("batman-adv: prevent using any virtual device created on batman-adv as hard-interface") Reported-by: syzbot+c764de0fcfadca9a8595@syzkaller.appspotmail.com Reported-by: Dmitry Vyukov Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Greg Kroah-Hartman

xfrm: refine validation of template and selector families

2019-02-15T07:07:39Z

commit 35e6103861a3a970de6c84688c6e7a1f65b164ca upstream. The check assumes that in transport mode, the first templates family must match the address family of the policy selector. Syzkaller managed to build a template using MODE_ROUTEOPTIMIZATION, with ipv4-in-ipv6 chain, leading to following splat: BUG: KASAN: stack-out-of-bounds in xfrm_state_find+0x1db/0x1854 Read of size 4 at addr ffff888063e57aa0 by task a.out/2050 xfrm_state_find+0x1db/0x1854 xfrm_tmpl_resolve+0x100/0x1d0 xfrm_resolve_and_create_bundle+0x108/0x1000 [..] Problem is that addresses point into flowi4 struct, but xfrm_state_find treats them as being ipv6 because it uses templ->encap_family is used (AF_INET6 in case of reproducer) rather than family (AF_INET). This patch inverts the logic: Enforce 'template family must match selector' EXCEPT for tunnel and BEET mode. In BEET and Tunnel mode, xfrm_tmpl_resolve_one will have remote/local address pointers changed to point at the addresses found in the template, rather than the flowi ones, so no oob read will occur. Reported-by: 3ntr0py1337@gmail.com Reported-by: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman

libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()

2019-02-15T07:07:39Z

commit 4aac9228d16458cedcfd90c7fb37211cf3653ac3 upstream. con_fault() can transition the connection into STANDBY right after ceph_con_keepalive() clears STANDBY in clear_standby(): libceph user thread ceph-msgr worker ceph_con_keepalive() mutex_lock(&con->mutex) clear_standby(con) mutex_unlock(&con->mutex) mutex_lock(&con->mutex) con_fault() ... if KEEPALIVE_PENDING isn't set set state to STANDBY ... mutex_unlock(&con->mutex) set KEEPALIVE_PENDING set WRITE_PENDING This triggers warnings in clear_standby() when either ceph_con_send() or ceph_con_keepalive() get to clearing STANDBY next time. I don't see a reason to condition queue_con() call on the previous value of KEEPALIVE_PENDING, so move the setting of KEEPALIVE_PENDING into the critical section -- unlike WRITE_PENDING, KEEPALIVE_PENDING could have been a non-atomic flag. Reported-by: syzbot+acdeb633f6211ccdf886@syzkaller.appspotmail.com Signed-off-by: Ilya Dryomov Tested-by: Myungho Jung Signed-off-by: Greg Kroah-Hartman

Revert "cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)"

2019-02-15T07:07:39Z

This reverts commit 4cd376638c893cf5bf1072eeaac884f62b7ac71e which is commit 6e785302dad32228819d8066e5376acd15d0e6ba upstream. Yi writes: I notice that 4.4.169 merged 60da90b224ba7 ("cifs: In Kconfig CONFIG_CIFS_POSIX needs depends on legacy (insecure cifs)") add a Kconfig dependency CIFS_ALLOW_INSECURE_LEGACY, which was not defined in 4.4 stable, so after this patch we are not able to enable CIFS_POSIX anymore. Linux 4.4 stable didn't merge the legacy dialects codes, so do we really need this patch for 4.4? So revert this patch in 4.9 as well. Reported-by: "zhangyi (F)" Cc: Steve French Cc: Pavel Shilovsky Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

HID: debug: fix the ring buffer implementation

2019-02-15T07:07:39Z

commit 13054abbaa4f1fd4e6f3b4b63439ec033b4c8035 upstream. Ring buffer implementation in hid_debug_event() and hid_debug_events_read() is strange allowing lost or corrupted data. After commit 717adfdaf147 ("HID: debug: check length before copy_to_user()") it is possible to enter an infinite loop in hid_debug_events_read() by providing 0 as count, this locks up a system. Fix this by rewriting the ring buffer implementation with kfifo and simplify the code. This fixes CVE-2019-3819. v2: fix an execution logic and add a comment v3: use __set_current_state() instead of set_current_state() Backport to v4.9: some tree-wide patches are missing in v4.9 so cherry-pick relevant pieces from: * 6396bb22151 ("treewide: kzalloc() -> kcalloc()") * a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement") * 174cd4b1e5fb ("sched/headers: Prepare to move signal wakeup & sigpending methods from into ") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1669187 Cc: stable@vger.kernel.org # v4.18+ Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping") Fixes: 717adfdaf147 ("HID: debug: check length before copy_to_user()") Signed-off-by: Vladis Dronov Reviewed-by: Oleg Nesterov Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

nfsd4: catch some false session retries

2019-02-15T07:07:39Z

commit 53da6a53e1d414e05759fa59b7032ee08f4e22d7 upstream. The spec allows us to return NFS4ERR_SEQ_FALSE_RETRY if we notice that the client is making a call that matches a previous (slot, seqid) pair but that *isn't* actually a replay, because some detail of the call doesn't actually match the previous one. Catching every such case is difficult, but we may as well catch a few easy ones. This also handles the case described in the previous patch, in a different way. The spec does however require us to catch the case where the difference is in the rpc credentials. This prevents somebody from snooping another user's replies by fabricating retries. (But the practical value of the attack is limited by the fact that the replies with the most sensitive data are READ replies, which are not normally cached.) Tested-by: Olga Kornievskaia Signed-off-by: J. Bruce Fields Cc: Salvatore Bonaccorso Signed-off-by: Greg Kroah-Hartman