user/sven/linux.git, branch v4.9.175

Linux 4.9.175

2019-05-10T15:52:11Z

timer/debug: Change /proc/timer_stats from 0644 to 0600

2019-05-10T15:52:11Z

The timer_stats facility should filter and translate PIDs if opened from a non-initial PID namespace, to avoid leaking information about the wider system. It should also not show kernel virtual addresses. Unfortunately it has now been removed upstream (as redundant) instead of being fixed. For stable, fix the leak by restricting access to root only. A similar change was already made for the /proc/timer_list file. Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

ASoC: Intel: avoid Oops if DMA setup fails

2019-05-10T15:52:10Z

commit 0efa3334d65b7f421ba12382dfa58f6ff5bf83c4 upstream. Currently in sst_dsp_new() if we get an error return from sst_dma_new() we just print an error message and then still complete the function successfully. This means that we are trying to run without sst->dma properly set up, which will result in NULL pointer dereference when sst->dma is later used. This was happening for me in sst_dsp_dma_get_channel(): struct sst_dma *dma = dsp->dma; ... dma->ch = dma_request_channel(mask, dma_chan_filter, dsp); This resulted in: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: sst_dsp_dma_get_channel+0x4f/0x125 [snd_soc_sst_firmware] Fix this by adding proper error handling for the case where we fail to set up DMA. This change only affects Haswell and Broadwell systems. Baytrail systems explicilty opt-out of DMA via sst->pdata->resindex_dma_base being set to -1. Signed-off-by: Ross Zwisler Cc: stable@vger.kernel.org Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

UAS: fix alignment of scatter/gather segments

2019-05-10T15:52:10Z

commit 3ae62a42090f1ed48e2313ed256a1182a85fb575 upstream. This is the UAS version of 747668dbc061b3e62bc1982767a3a1f9815fcf0e usb-storage: Set virt_boundary_mask to avoid SG overflows We are not as likely to be vulnerable as storage, as it is unlikelier that UAS is run over a controller without native support for SG, but the issue exists. The issue has been existing since the inception of the driver. Fixes: 115bb1ffa54c ("USB: Add UAS driver") Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

2019-05-10T15:52:10Z

commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream. The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

Bluetooth: hidp: fix buffer overflow

2019-05-10T15:52:10Z

commit a1616a5ac99ede5d605047a9012481ce7ff18b16 upstream. Struct ca is copied from userspace. It is not checked whether the "name" field is NULL terminated, which allows local users to obtain potentially sensitive information from kernel stack memory, via a HIDPCONNADD command. This vulnerability is similar to CVE-2011-1079. Signed-off-by: Young Xiao Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix incorrect region-size setting in optrom SYSFS routines

2019-05-10T15:52:10Z

commit 5cbdae10bf11f96e30b4d14de7b08c8b490e903c upstream. Commit e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs code") incorrectly set 'optrom_region_size' to 'start+size', which can overflow option-rom boundaries when 'start' is non-zero. Continue setting optrom_region_size to the proper adjusted value of 'size'. Fixes: e6f77540c067 ("scsi: qla2xxx: Fix an integer overflow in sysfs code") Cc: stable@vger.kernel.org Signed-off-by: Andrew Vasquez Signed-off-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

usb-storage: Set virt_boundary_mask to avoid SG overflows

2019-05-10T15:52:10Z

commit 747668dbc061b3e62bc1982767a3a1f9815fcf0e upstream. The USB subsystem has always had an unusual requirement for its scatter-gather transfers: Each element in the scatterlist (except the last one) must have a length divisible by the bulk maxpacket size. This is a particular issue for USB mass storage, which uses SG lists created by the block layer rather than setting up its own. So far we have scraped by okay because most devices have a logical block size of 512 bytes or larger, and the bulk maxpacket sizes for USB 2 and below are all <= 512. However, USB 3 has a bulk maxpacket size of 1024. Since the xhci-hcd driver includes native SG support, this hasn't mattered much. But now people are trying to use USB-3 mass storage devices with USBIP, and the vhci-hcd driver currently does not have full SG support. The result is an overflow error, when the driver attempts to implement an SG transfer of 63 512-byte blocks as a single 3584-byte (7 blocks) transfer followed by seven 4096-byte (8 blocks) transfers. The device instead sends 31 1024-byte packets followed by a 512-byte packet, and this overruns the first SG buffer. Ideally this would be fixed by adding better SG support to vhci-hcd. But for now it appears we can work around the problem by asking the block layer to respect the maxpacket limitation, through the use of the virt_boundary_mask. Signed-off-by: Alan Stern Reported-by: Seth Bollinger Tested-by: Seth Bollinger CC: Ming Lei Cc: stable Signed-off-by: Greg Kroah-Hartman

USB: serial: f81232: fix interrupt worker not stop

2019-05-10T15:52:10Z

commit 804dbee1e49774918339c1e5a87400988c0819e8 upstream. The F81232 will use interrupt worker to handle MSR change. This patch will fix the issue that interrupt work should stop in close() and suspend(). This also fixes line-status events being disabled after a suspend cycle until the port is re-opened. Signed-off-by: Ji-Ze Hong (Peter Hong) [ johan: amend commit message ] Fixes: 87fe5adcd8de ("USB: f81232: implement read IIR/MSR with endpoint") Cc: stable # 4.1 Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Fix default lpm_nyet_threshold value

2019-05-10T15:52:10Z

commit 8d791929b2fbdf7734c1596d808e55cb457f4562 upstream. The max possible value for DCTL.LPM_NYET_THRES is 15 and not 255. Change the default value to 15. Cc: stable@vger.kernel.org Fixes: 80caf7d21adc ("usb: dwc3: add lpm erratum support") Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman