user/sven/linux.git, branch v4.9.197

Linux 4.9.197

2019-10-17T20:42:47Z

xfs: clear sb->s_fs_info on mount failure

2019-10-17T20:42:47Z

commit c9fbd7bbc23dbdd73364be4d045e5d3612cf6e82 upstream. We recently had an oops reported on a 4.14 kernel in xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage and so the m_perag_tree lookup walked into lala land. Essentially, the machine was under memory pressure when the mount was being run, xfs_fs_fill_super() failed after allocating the xfs_mount and attaching it to sb->s_fs_info. It then cleaned up and freed the xfs_mount, but the sb->s_fs_info field still pointed to the freed memory. Hence when the superblock shrinker then ran it fell off the bad pointer. With the superblock shrinker problem fixed at teh VFS level, this stale s_fs_info pointer is still a problem - we use it unconditionally in ->put_super when the superblock is being torn down, and hence we can still trip over it after a ->fill_super call failure. Hence we need to clear s_fs_info if xfs-fs_fill_super() fails, and we need to check if it's valid in the places it can potentially be dereferenced after a ->fill_super failure. Signed-Off-By: Dave Chinner Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Ajay Kaher Signed-off-by: Greg Kroah-Hartman

x86/asm: Fix MWAITX C-state hint value

2019-10-17T20:42:46Z

commit 454de1e7d970d6bc567686052329e4814842867c upstream. As per "AMD64 Architecture Programmer's Manual Volume 3: General-Purpose and System Instructions", MWAITX EAX[7:4]+1 specifies the optional hint of the optimized C-state. For C0 state, EAX[7:4] should be set to 0xf. Currently, a value of 0xf is set for EAX[3:0] instead of EAX[7:4]. Fix this by changing MWAITX_DISABLE_CSTATES from 0xf to 0xf0. This hasn't had any implications so far because setting reserved bits in EAX is simply ignored by the CPU. [ bp: Fixup comment in delay_mwaitx() and massage. ] Signed-off-by: Janakarajan Natarajan Signed-off-by: Borislav Petkov Cc: Frederic Weisbecker Cc: Greg Kroah-Hartman Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "x86@kernel.org" Cc: Zhenzhong Duan Cc: Link: https://lkml.kernel.org/r/20191007190011.4859-1-Janakarajan.Natarajan@amd.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

tracing: Get trace_array reference for available_tracers files

2019-10-17T20:42:46Z

commit 194c2c74f5532e62c218adeb8e2b683119503907 upstream. As instances may have different tracers available, we need to look at the trace_array descriptor that shows the list of the available tracers for the instance. But there's a race between opening the file and an admin deleting the instance. The trace_array_get() needs to be called before accessing the trace_array. Cc: stable@vger.kernel.org Fixes: 607e2ea167e56 ("tracing: Set up infrastructure to allow tracers for instances") Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

tracing/hwlat: Don't ignore outer-loop duration when calculating max_latency

2019-10-17T20:42:46Z

commit fc64e4ad80d4b72efce116f87b3174f0b7196f8e upstream. max_latency is intended to record the maximum ever observed hardware latency, which may occur in either part of the loop (inner/outer). So we need to also consider the outer-loop sample when updating max_latency. Link: http://lkml.kernel.org/r/157073345463.17189.18124025522664682811.stgit@srivatsa-ubuntu Fixes: e7c15cd8a113 ("tracing: Added hardware latency tracer") Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat (VMware) Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

tracing/hwlat: Report total time spent in all NMIs during the sample

2019-10-17T20:42:46Z

commit 98dc19c11470ee6048aba723d77079ad2cda8a52 upstream. nmi_total_ts is supposed to record the total time spent in *all* NMIs that occur on the given CPU during the (active portion of the) sampling window. However, the code seems to be overwriting this variable for each NMI, thereby only recording the time spent in the most recent NMI. Fix it by accumulating the duration instead. Link: http://lkml.kernel.org/r/157073343544.17189.13911783866738671133.stgit@srivatsa-ubuntu Fixes: 7b2c86250122 ("tracing: Add NMI tracing in hwlat detector") Cc: stable@vger.kernel.org Signed-off-by: Srivatsa S. Bhat (VMware) Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Greg Kroah-Hartman

media: stkwebcam: fix runtime PM after driver unbind

2019-10-17T20:42:46Z

commit 30045f2174aab7fb4db7a9cf902d0aa6c75856a7 upstream. Since commit c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") USB drivers must always balance their runtime PM gets and puts, including when the driver has already been unbound from the interface. Leaving the interface with a positive PM usage counter would prevent a later bound driver from suspending the device. Note that runtime PM has never actually been enabled for this driver since the support_autosuspend flag in its usb_driver struct is not set. Fixes: c2b71462d294 ("USB: core: Fix bug caused by duplicate interface PM usage counter") Cc: stable Acked-by: Mauro Carvalho Chehab Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20191001084908.2003-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman

Fix the locking in dcache_readdir() and friends

2019-10-17T20:42:45Z

commit d4f4de5e5ef8efde85febb6876cd3c8ab1631999 upstream. There are two problems in dcache_readdir() - one is that lockless traversal of the list needs non-trivial cooperation of d_alloc() (at least a switch to list_add_rcu(), and probably more than just that) and another is that it assumes that no removal will happen without the directory locked exclusive. Said assumption had always been there, never had been stated explicitly and is violated by several places in the kernel (devpts and selinuxfs). * replacement of next_positive() with different calling conventions: it returns struct list_head * instead of struct dentry *; the latter is passed in and out by reference, grabbing the result and dropping the original value. * scan is under ->d_lock. If we run out of timeslice, cursor is moved after the last position we'd reached and we reschedule; then the scan continues from that place. To avoid livelocks between multiple lseek() (with cursors getting moved past each other, never reaching the real entries) we always skip the cursors, need_resched() or not. * returned list_head * is either ->d_child of dentry we'd found or ->d_subdirs of parent (if we got to the end of the list). * dcache_readdir() and dcache_dir_lseek() switched to new helper. dcache_readdir() always holds a reference to dentry passed to dir_emit() now. Cursor is moved to just before the entry where dir_emit() has failed or into the very end of the list, if we'd run out. * move_cursor() eliminated - it had sucky calling conventions and after fixing that it became simply list_move() (in lseek and scan_positives) or list_move_tail() (in readdir). All operations with the list are under ->d_lock now, and we do not depend upon having all file removals done with parent locked exclusive anymore. Cc: stable@vger.kernel.org Reported-by: "zhengbin (A)" Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

MIPS: Disable Loongson MMI instructions for kernel build

2019-10-17T20:42:45Z

commit 2f2b4fd674cadd8c6b40eb629e140a14db4068fd upstream. GCC 9.x automatically enables support for Loongson MMI instructions when using some -march= flags, and then errors out when -msoft-float is specified with: cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’ The kernel shouldn't be using these MMI instructions anyway, just as it doesn't use floating point instructions. Explicitly disable them in order to fix the build with GCC 9.x. Signed-off-by: Paul Burton Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E") Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support") Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform") Cc: Huacai Chen Cc: Jiaxun Yang Cc: stable@vger.kernel.org # v2.6.32+ Cc: linux-mips@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

Staging: fbtft: fix memory leak in fbtft_framebuffer_alloc

2019-10-17T20:42:45Z

[ Upstream commit 5bdea6060618cfcf1459dca137e89aee038ac8b9 ] In fbtft_framebuffer_alloc the error handling path should take care of releasing frame buffer after it is allocated via framebuffer_alloc, too. Therefore, in two failure cases the goto destination is changed to address this issue. Fixes: c296d5f9957c ("staging: fbtft: core support") Signed-off-by: Navid Emamdoost Reviewed-by: Dan Carpenter Cc: stable Link: https://lore.kernel.org/r/20190930030949.28615-1-navid.emamdoost@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin