user/sven/linux.git, branch v4.9.208

Linux 4.9.208

2020-01-04T12:41:15Z

gtp: avoid zero size hashtable

2020-01-04T12:41:15Z

[ Upstream commit 6a902c0f31993ab02e1b6ea7085002b9c9083b6a ] GTP default hashtable size is 1024 and userspace could set specific hashtable size with IFLA_GTP_PDP_HASHSIZE. If hashtable size is set to 0 from userspace, hashtable will not work and panic will occur. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

gtp: fix wrong condition in gtp_genl_dump_pdp()

2020-01-04T12:41:14Z

[ Upstream commit 94a6d9fb88df43f92d943c32b84ce398d50bf49f ] gtp_genl_dump_pdp() is ->dumpit() callback of GTP module and it is used to dump pdp contexts. it would be re-executed because of dump packet size. If dump packet size is too big, it saves current dump pointer (gtp interface pointer, bucket, TID value) then it restarts dump from last pointer. Current GTP code allows adding zero TID pdp context but dump code ignores zero TID value. So, last dump pointer will not be found. In addition, this patch adds missing rcu_read_lock() in gtp_genl_dump_pdp(). Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

tcp: do not send empty skb from tcp_write_xmit()

2020-01-04T12:41:13Z

[ Upstream commit 1f85e6267caca44b30c54711652b0726fadbb131 ] Backport of commit fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases") in linux-4.14 stable triggered various bugs. One of them has been fixed in commit ba2ddb43f270 ("tcp: Don't dequeue SYN/FIN-segments from write-queue"), but we still have crashes in some occasions. Root-cause is that when tcp_sendmsg() has allocated a fresh skb and could not append a fragment before being blocked in sk_stream_wait_memory(), tcp_write_xmit() might be called and decide to send this fresh and empty skb. Sending an empty packet is not only silly, it might have caused many issues we had in the past with tp->packets_out being out of sync. Fixes: c65f7f00c587 ("[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.") Signed-off-by: Eric Dumazet Cc: Christoph Paasch Acked-by: Neal Cardwell Cc: Jason Baron Acked-by: Soheil Hassas Yeganeh Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

tcp/dccp: fix possible race __inet_lookup_established()

2020-01-04T12:41:12Z

commit 8dbd76e79a16b45b2ccb01d2f2e08dbf64e71e40 upstream. Michal Kubecek and Firo Yang did a very nice analysis of crashes happening in __inet_lookup_established(). Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN (via a close()/socket()/listen() cycle) without a RCU grace period, I should not have changed listeners linkage in their hash table. They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt), so that a lookup can detect a socket in a hash list was moved in another one. Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix"), we have to add hlist_nulls_add_tail_rcu() helper. Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet Reported-by: Michal Kubecek Reported-by: Firo Yang Reviewed-by: Michal Kubecek Link: https://lore.kernel.org/netdev/20191120083919.GH27852@unicorn.suse.cz/ Signed-off-by: Jakub Kicinski [stable-4.9: we also need to update code in __inet_lookup_listener() and inet6_lookup_listener() which has been removed in 5.0-rc1.] Signed-off-by: Michal Kubecek Signed-off-by: Greg Kroah-Hartman

vhost/vsock: accept only packets with the right dst_cid

2020-01-04T12:41:12Z

[ Upstream commit 8a3cc29c316c17de590e3ff8b59f3d6cbfd37b0a ] When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: ena: fix napi handler misbehavior when the napi budget is zero

2020-01-04T12:41:11Z

[ Upstream commit 24dee0c7478d1a1e00abdf5625b7f921467325dc ] In netpoll the napi handler could be called with budget equal to zero. Current ENA napi handler doesn't take that into consideration. The napi handler handles Rx packets in a do-while loop. Currently, the budget check happens only after decrementing the budget, therefore the napi handler, in rare cases, could run over MAX_INT packets. In addition to that, this moves all budget related variables to int calculation and stop mixing u32 to avoid ambiguity Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: Update the tuning failed messages to pr_debug level

2020-01-04T12:41:10Z

Tuning support in DDR50 speed mode was added in SD Specifications Part1 Physical Layer Specification v3.01. Its not possible to distinguish between v3.00 and v3.01 from the SCR and that is why since commit 4324f6de6d2e ("mmc: core: enable CMD19 tuning for DDR50 mode") tuning failures are ignored in DDR50 speed mode. Cards compatible with v3.00 don't respond to CMD19 in DDR50 and this error gets printed during enumeration and also if retune is triggered at any time during operation. Update the printk level to pr_debug so that these errors don't lead to false error reports. Signed-off-by: Faiz Abbas Cc: stable@vger.kernel.org # v4.4+ Link: https://lore.kernel.org/r/20191206114326.15856-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

pinctrl: baytrail: Really serialize all register accesses

2020-01-04T12:41:09Z

[ Upstream commit 40ecab551232972a39cdd8b6f17ede54a3fdb296 ] Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access") added a spinlock around all register accesses because: "There is a hardware issue in Intel Baytrail where concurrent GPIO register access might result reads of 0xffffffff and writes might get dropped completely." Testing has shown that this does not catch all cases, there are still 2 problems remaining 1) The original fix uses a spinlock per byt_gpio device / struct, additional testing has shown that this is not sufficient concurent accesses to 2 different GPIO banks also suffer from the same problem. This commit fixes this by moving to a single global lock. 2) The original fix did not add a lock around the register accesses in the suspend/resume handling. Since pinctrl-baytrail.c is using normal suspend/resume handlers, interrupts are still enabled during suspend/resume handling. Nothing should be using the GPIOs when they are being taken down, _but_ the GPIOs themselves may still cause interrupts, which are likely to use (read) the triggering GPIO. So we need to protect against concurrent GPIO register accesses in the suspend/resume handlers too. This commit fixes this by adding the missing spin_lock / unlock calls. The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely confused after a suspend resume. The DSDT for this device has a bug in its _LID method which reprograms the home and power button trigger- flags requesting both high and low _level_ interrupts so the IRQs for these 2 GPIOs continuously fire. This combined with the saving of registers during suspend, triggers concurrent GPIO register accesses resulting in saving 0xffffffff as pconf0 value during suspend and then when restoring this on resume the pinmux settings get all messed up, resulting in various I2C busses being stuck, the wifi no longer working and often the tablet simply not coming out of suspend at all. Cc: stable@vger.kernel.org Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access") Signed-off-by: Hans de Goede Acked-by: Mika Westerberg Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin

tty/serial: atmel: fix out of range clock divider handling

2020-01-04T12:41:09Z

[ Upstream commit cb47b9f8630ae3fa3f5fbd0c7003faba7abdf711 ] Use MCK_DIV8 when the clock divider is > 65535. Unfortunately the mode register was already written thus the clock selection is ignored. Fix by doing the baud rate calulation before setting the mode. Fixes: 5bf5635ac170 ("tty/serial: atmel: add fractional baud rate support") Signed-off-by: David Engraf Acked-by: Ludovic Desroches Acked-by: Richard Genoud Cc: stable Link: https://lore.kernel.org/r/20191216085403.17050-1-david.engraf@sysgo.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin