user/sven/linux.git, branch v4.9.242

Linux 4.9.242

2020-11-10T09:24:04Z

Tested-by: Jon Hunter Tested-by: Guenter Roeck Tested-by: Shuah Khan Link: https://lore.kernel.org/r/20201109125025.630721781@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

Revert "ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE"

2020-11-10T09:24:04Z

This reverts commit 00fdec98d9881bf5173af09aebd353ab3b9ac729. (but only from 5.2 and prior kernels) The original commit was a preventive fix based on code-review and was auto-picked for stable back-port (for better or worse). It was OK for v5.3+ kernels, but turned up needing an implicit change 68e5c6f073bcf70 "(ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause)" merged in v5.3 which itself was not backported. So to summarize the stable backport of this patch for v5.2 and prior kernels is busted and it won't boot. The obvious solution is backport 68e5c6f073bcf70 but that is a pain as it doesn't revert cleanly and each of affected kernels (so far v4.19, v4.14, v4.9, v4.4) needs a slightly different massaged varaint. So the easier fix is to simply revert the backport from 5.2 and prior. The issue was not a big deal as it would cause strace to sporadically not work correctly. Waldemar Brodkorb first reported this when running ARC uClibc regressions on latest stable kernels (with offending backport). Once he bisected it, the analysis was trivial, so thx to him for this. Reported-by: Waldemar Brodkorb Bisected-by: Waldemar Brodkorb Cc: stable # 5.2 and prior Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman

ARC: stack unwinding: avoid indefinite looping

2020-11-10T09:24:04Z

commit 328d2168ca524d501fc4b133d6be076142bd305c upstream. Currently stack unwinder is a while(1) loop which relies on the dwarf unwinder to signal termination, which in turn relies on dwarf info to do so. This in theory could cause an infinite loop if the dwarf info was somehow messed up or the register contents were etc. This fix thus detects the excessive looping and breaks the loop. | Mem: 26184K used, 1009136K free, 0K shrd, 0K buff, 14416K cached | CPU: 0.0% usr 72.8% sys 0.0% nic 27.1% idle 0.0% io 0.0% irq 0.0% sirq | Load average: 4.33 2.60 1.11 2/74 139 | PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND | 133 2 root SWN 0 0.0 3 22.9 [rcu_torture_rea] | 132 2 root SWN 0 0.0 0 22.0 [rcu_torture_rea] | 131 2 root SWN 0 0.0 3 21.5 [rcu_torture_rea] | 126 2 root RW 0 0.0 2 5.4 [rcu_torture_wri] | 129 2 root SWN 0 0.0 0 0.2 [rcu_torture_fak] | 137 2 root SW 0 0.0 0 0.2 [rcu_torture_cbf] | 127 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 138 115 root R 1464 0.1 2 0.1 top | 130 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 128 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 115 1 root S 1472 0.1 1 0.0 -/bin/sh | 104 1 root S 1464 0.1 0 0.0 inetd | 1 0 root S 1456 0.1 2 0.0 init | 78 1 root S 1456 0.1 0 0.0 syslogd -O /var/log/messages | 134 2 root SW 0 0.0 2 0.0 [rcu_torture_sta] | 10 2 root IW 0 0.0 1 0.0 [rcu_preempt] | 88 2 root IW 0 0.0 1 0.0 [kworker/1:1-eve] | 66 2 root IW 0 0.0 2 0.0 [kworker/2:2-eve] | 39 2 root IW 0 0.0 2 0.0 [kworker/2:1-eve] | unwinder looping too long, aborting ! Cc: Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman

USB: Add NO_LPM quirk for Kingston flash drive

2020-11-10T09:24:04Z

commit afaa2e745a246c5ab95103a65b1ed00101e1bc63 upstream. In Bugzilla #208257, Julien Humbert reports that a 32-GB Kingston flash drive spontaneously disconnects and reconnects, over and over. Testing revealed that disabling Link Power Management for the drive fixed the problem. This patch adds a quirk entry for that drive to turn off LPM permanently. CC: Hans de Goede CC: Reported-and-tested-by: Julien Humbert Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/20201102145821.GA1478741@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Telit FN980 composition 0x1055

2020-11-10T09:24:04Z

commit db0362eeb22992502764e825c79b922d7467e0eb upstream. Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231

2020-11-10T09:24:04Z

commit 489979b4aab490b6b917c11dc02d81b4b742784a upstream. Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com [ johan: add comments after entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: cyberjack: fix write-URB completion race

2020-11-10T09:24:04Z

commit 985616f0457d9f555fff417d0da56174f70cc14f upstream. The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable # 2.6.13 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init

2020-11-10T09:24:03Z

commit 0c5fc92622ed5531ff324b20f014e9e3092f0187 upstream. Add the missing platform_driver_unregister() before return from serial_txx9_init in the error handling case when failed to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI defined. Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Signed-off-by: Qinglang Miao Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_mtk: Fix uart_get_baud_rate warning

2020-11-10T09:24:03Z

commit 912ab37c798770f21b182d656937072b58553378 upstream. Mediatek 8250 port supports speed higher than uartclk / 16. If the baud rates in both the new and the old termios setting are higher than uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered. Passing NULL as the old termios so uart_get_baud_rate() will use uartclk / 16 - 1 as the new baud rate which will be replaced by the original baud rate later by tty_termios_encode_baud_rate() in mtk8250_set_termios(). Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping") Signed-off-by: Claire Chang Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org Cc: stable Signed-off-by: Greg Kroah-Hartman

fork: fix copy_process(CLONE_PARENT) race with the exiting ->real_parent

2020-11-10T09:24:03Z

commit b4e00444cab4c3f3fec876dc0cccc8cbb0d1a948 upstream. current->group_leader->exit_signal may change during copy_process() if current->real_parent exits. Move the assignment inside tasklist_lock to avoid the race. Signed-off-by: Eddy Wu Acked-by: Oleg Nesterov Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman