user/sven/linux.git, branch v4.9.287

Linux 4.9.287

2021-10-17T08:05:40Z

Link: https://lore.kernel.org/r/20211014145207.575041491@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

perf/x86: Reset destroy callback on event init failure

2021-10-17T08:05:40Z

[ Upstream commit 02d029a41dc986e2d5a77ecca45803857b346829 ] perf_init_event tries multiple init callbacks and does not reset the event state between tries. When x86_pmu_event_init runs, it unconditionally sets the destroy callback to hw_perf_event_destroy. On the next init attempt after x86_pmu_event_init, in perf_try_init_event, if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy callback will be run. However, if the next init didn't set the destroy callback, hw_perf_event_destroy will be run (since the callback wasn't reset). Looking at other pmu init functions, the common pattern is to only set the destroy callback on a successful init. Resetting the callback on failure tries to replicate that pattern. This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second) run of the perf tool after a reboot results in 0 samples being generated. The extra run of hw_perf_event_destroy results in active_events having an extra decrement on each perf run. The second run has active_events == 0 and every subsequent run has active_events < 0. When active_events == 0, the NMI handler will early-out and not record any samples. Signed-off-by: Anand K Mistry Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid Signed-off-by: Sasha Levin

scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"

2021-10-17T08:05:40Z

[ Upstream commit cced4c0ec7c06f5230a2958907a409c849762293 ] There are a couple of spelling mistakes in pr_info and pr_err messages. Fix them. Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com Signed-off-by: Colin Ian King Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ses: Fix unsigned comparison with less than zero

2021-10-17T08:05:40Z

[ Upstream commit dd689ed5aa905daf4ba4c99319a52aad6ea0a796 ] Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot Signed-off-by: Jiapeng Chong Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

mac80211: Drop frames from invalid MAC address in ad-hoc mode

2021-10-17T08:05:40Z

[ Upstream commit a6555f844549cd190eb060daef595f94d3de1582 ] WARNING: CPU: 1 PID: 9 at net/mac80211/sta_info.c:554 sta_info_insert_rcu+0x121/0x12a0 Modules linked in: CPU: 1 PID: 9 Comm: kworker/u8:1 Not tainted 5.14.0-rc7+ #253 Workqueue: phy3 ieee80211_iface_work RIP: 0010:sta_info_insert_rcu+0x121/0x12a0 ... Call Trace: ieee80211_ibss_finish_sta+0xbc/0x170 ieee80211_ibss_work+0x13f/0x7d0 ieee80211_iface_work+0x37a/0x500 process_one_work+0x357/0x850 worker_thread+0x41/0x4d0 If an Ad-Hoc node receives packets with invalid source MAC address, it hits a WARN_ON in sta_info_insert_check(), this can spam the log. Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20210827144230.39944-1-yuehaibing@huawei.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

netfilter: ip6_tables: zero-initialize fragment offset

2021-10-17T08:05:40Z

[ Upstream commit 310e2d43c3ad429c1fba4b175806cf1f55ed73a6 ] ip6tables only sets the `IP6T_F_PROTO` flag on a rule if a protocol is specified (`-p tcp`, for example). However, if the flag is not set, `ip6_packet_match` doesn't call `ipv6_find_hdr` for the skb, in which case the fragment offset is left uninitialized and a garbage value is passed to each matcher. Signed-off-by: Jeremy Sowden Reviewed-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin

HID: apple: Fix logical maximum and usage maximum of Magic Keyboard JIS

2021-10-17T08:05:40Z

[ Upstream commit 67fd71ba16a37c663d139f5ba5296f344d80d072 ] Apple Magic Keyboard(JIS)'s Logical Maximum and Usage Maximum are wrong. Below is a report descriptor. 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x06, /* Usage (Keyboard), */ 0xA1, 0x01, /* Collection (Application), */ 0x85, 0x01, /* Report ID (1), */ 0x05, 0x07, /* Usage Page (Keyboard), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ 0x19, 0xE0, /* Usage Minimum (KB Leftcontrol), */ 0x29, 0xE7, /* Usage Maximum (KB Right GUI), */ 0x75, 0x01, /* Report Size (1), */ 0x95, 0x08, /* Report Count (8), */ 0x81, 0x02, /* Input (Variable), */ 0x95, 0x05, /* Report Count (5), */ 0x75, 0x01, /* Report Size (1), */ 0x05, 0x08, /* Usage Page (LED), */ 0x19, 0x01, /* Usage Minimum (01h), */ 0x29, 0x05, /* Usage Maximum (05h), */ 0x91, 0x02, /* Output (Variable), */ 0x95, 0x01, /* Report Count (1), */ 0x75, 0x03, /* Report Size (3), */ 0x91, 0x03, /* Output (Constant, Variable), */ 0x95, 0x08, /* Report Count (8), */ 0x75, 0x01, /* Report Size (1), */ 0x15, 0x00, /* Logical Minimum (0), */ 0x25, 0x01, /* Logical Maximum (1), */ here is a report descriptor which is parsed one in kernel. see sys/kernel/debug/hid//rdesc 05 01 09 06 a1 01 85 01 05 07 15 00 25 01 19 e0 29 e7 75 01 95 08 81 02 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 03 95 08 75 01 15 00 25 01 06 00 ff 09 03 81 03 95 06 75 08 15 00 25 [65] 05 07 19 00 29 [65] 81 00 95 01 75 01 15 00 25 01 05 0c 09 b8 81 02 95 01 75 01 06 01 ff 09 03 81 02 95 01 75 06 81 03 06 02 ff 09 55 85 55 15 00 26 ff 00 75 08 95 40 b1 a2 c0 06 00 ff 09 14 a1 01 85 90 05 84 75 01 95 03 15 00 25 01 09 61 05 85 09 44 09 46 81 02 95 05 81 01 75 08 95 01 15 00 26 ff 00 09 65 81 02 c0 00 Position 64(Logical Maximum) and 70(Usage Maximum) are 101. Both should be 0xE7 to support JIS specific keys(ろ, Eisu, Kana, |) support. position 117 is also 101 but not related(it is Usage 65h). There are no difference of product id between JIS and ANSI. They are same 0x0267. Signed-off-by: Mizuho Mori Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

gup: document and work around "COW can break either way" issue

2021-10-17T08:05:40Z

commit 17839856fd588f4ab6b789f482ed3ffd7c403e1f upstream. Doing a "get_user_pages()" on a copy-on-write page for reading can be ambiguous: the page can be COW'ed at any time afterwards, and the direction of a COW event isn't defined. Yes, whoever writes to it will generally do the COW, but if the thread that did the get_user_pages() unmapped the page before the write (and that could happen due to memory pressure in addition to any outright action), the writer could also just take over the old page instead. End result: the get_user_pages() call might result in a page pointer that is no longer associated with the original VM, and is associated with - and controlled by - another VM having taken it over instead. So when doing a get_user_pages() on a COW mapping, the only really safe thing to do would be to break the COW when getting the page, even when only getting it for reading. At the same time, some users simply don't even care. For example, the perf code wants to look up the page not because it cares about the page, but because the code simply wants to look up the physical address of the access for informational purposes, and doesn't really care about races when a page might be unmapped and remapped elsewhere. This adds logic to force a COW event by setting FOLL_WRITE on any copy-on-write mapping when FOLL_GET (or FOLL_PIN) is used to get a page pointer as a result. The current semantics end up being: - __get_user_pages_fast(): no change. If you don't ask for a write, you won't break COW. You'd better know what you're doing. - get_user_pages_fast(): the fast-case "look it up in the page tables without anything getting mmap_sem" now refuses to follow a read-only page, since it might need COW breaking. Which happens in the slow path - the fast path doesn't know if the memory might be COW or not. - get_user_pages() (including the slow-path fallback for gup_fast()): for a COW mapping, turn on FOLL_WRITE for FOLL_GET/FOLL_PIN, with very similar semantics to FOLL_FORCE. If it turns out that we want finer granularity (ie "only break COW when it might actually matter" - things like the zero page are special and don't need to be broken) we might need to push these semantics deeper into the lookup fault path. So if people care enough, it's possible that we might end up adding a new internal FOLL_BREAK_COW flag to go with the internal FOLL_COW flag we already have for tracking "I had a COW". Alternatively, if it turns out that different callers might want to explicitly control the forced COW break behavior, we might even want to make such a flag visible to the users of get_user_pages() instead of using the above default semantics. But for now, this is mostly commentary on the issue (this commit message being a lot bigger than the patch, and that patch in turn is almost all comments), with that minimal "enable COW breaking early" logic using the existing FOLL_WRITE behavior. [ It might be worth noting that we've always had this ambiguity, and it could arguably be seen as a user-space issue. You only get private COW mappings that could break either way in situations where user space is doing cooperative things (ie fork() before an execve() etc), but it _is_ surprising and very subtle, and fork() is supposed to give you independent address spaces. So let's treat this as a kernel issue and make the semantics of get_user_pages() easier to understand. Note that obviously a true shared mapping will still get a page that can change under us, so this does _not_ mean that get_user_pages() somehow returns any "stable" page ] [surenb: backport notes Since gup_pgd_range does not exist, made appropriate changes on the the gup_huge_pgd, gup_huge_pd and gup_pud_range calls instead. Replaced (gup_flags | FOLL_WRITE) with write=1 in gup_huge_pgd, gup_huge_pd and gup_pud_range. Removed FOLL_PIN usage in should_force_cow_break since it's missing in the earlier kernels.] Reported-by: Jann Horn Tested-by: Christoph Hellwig Acked-by: Oleg Nesterov Acked-by: Kirill Shutemov Acked-by: Jan Kara Cc: Andrea Arcangeli Cc: Matthew Wilcox Signed-off-by: Linus Torvalds [surenb: backport to 4.9 kernel] Signed-off-by: Suren Baghdasaryan Signed-off-by: Greg Kroah-Hartman

i40e: fix endless loop under rtnl

2021-10-17T08:05:40Z

[ Upstream commit 857b6c6f665cca9828396d9743faf37fd09e9ac3 ] The loop in i40e_get_capabilities can never end. The problem is that although i40e_aq_discover_capabilities returns with an error if there's a firmware problem, the returned error is not checked. There is a check for pf->hw.aq.asq_last_status but that value is set to I40E_AQ_RC_OK on most firmware problems. When i40e_aq_discover_capabilities encounters a firmware problem, it will encounter the same problem on its next invocation. As the result, the loop becomes endless. We hit this with I40E_ERR_ADMIN_QUEUE_TIMEOUT but looking at the code, it can happen with a range of other firmware errors. I don't know what the correct behavior should be: whether the firmware should be retried a few times, or whether pf->hw.aq.asq_last_status should be always set to the encountered firmware error (but then it would be pointless and can be just replaced by the i40e_aq_discover_capabilities return value). However, the current behavior with an endless loop under the rtnl mutex(!) is unacceptable and Intel has not submitted a fix, although we explained the bug to them 7 months ago. This may not be the best possible fix but it's better than hanging the whole system on a firmware bug. Fixes: 56a62fc86895 ("i40e: init code and hardware support") Tested-by: Stefan Assmann Signed-off-by: Jiri Benc Reviewed-by: Jesse Brandeburg Tested-by: Dave Switzer Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin

rtnetlink: fix if_nlmsg_stats_size() under estimation

2021-10-17T08:05:39Z

[ Upstream commit d34367991933d28bd7331f67a759be9a8c474014 ] rtnl_fill_statsinfo() is filling skb with one mandatory if_stats_msg structure. nlmsg_put(skb, pid, seq, type, sizeof(struct if_stats_msg), flags); But if_nlmsg_stats_size() never considered the needed storage. This bug did not show up because alloc_skb(X) allocates skb with extra tailroom, because of added alignments. This could very well be changed in the future to have deterministic behavior. Fixes: 10c9ead9f3c6 ("rtnetlink: add new RTM_GETSTATS message to dump link stats") Signed-off-by: Eric Dumazet Cc: Roopa Prabhu Acked-by: Roopa Prabhu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin