user/sven/linux.git, branch v5.10.58

Linux 5.10.58

2021-08-12T11:22:21Z

Link: https://lore.kernel.org/r/20210810172955.660225700@linuxfoundation.org Tested-by: Fox Chen Tested-by: Hulk Robot Tested-by: Sudip Mukherjee Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Tested-by: Shuah Khan Tested-by: Aakash Hemadri Signed-off-by: Greg Kroah-Hartman

arm64: fix compat syscall return truncation

2021-08-12T11:22:20Z

commit e30e8d46cf605d216a799a28c77b8a41c328613a upstream. Due to inconsistencies in the way we manipulate compat GPRs, we have a few issues today: * For audit and tracing, where error codes are handled as a (native) long, negative error codes are expected to be sign-extended to the native 64-bits, or they may fail to be matched correctly. Thus a syscall which fails with an error may erroneously be identified as failing. * For ptrace, *all* compat return values should be sign-extended for consistency with 32-bit arm, but we currently only do this for negative return codes. * As we may transiently set the upper 32 bits of some compat GPRs while in the kernel, these can be sampled by perf, which is somewhat confusing. This means that where a syscall returns a pointer above 2G, this will be sign-extended, but will not be mistaken for an error as error codes are constrained to the inclusive range [-4096, -1] where no user pointer can exist. To fix all of these, we must consistently use helpers to get/set the compat GPRs, ensuring that we never write the upper 32 bits of the return code, and always sign-extend when reading the return code. This patch does so, with the following changes: * We re-organise syscall_get_return_value() to always sign-extend for compat tasks, and reimplement syscall_get_error() atop. We update syscall_trace_exit() to use syscall_get_return_value(). * We consistently use syscall_set_return_value() to set the return value, ensureing the upper 32 bits are never set unexpectedly. * As the core audit code currently uses regs_return_value() rather than syscall_get_return_value(), we special-case this for compat_user_mode(regs) such that this will do the right thing. Going forward, we should try to move the core audit code over to syscall_get_return_value(). Cc: Reported-by: He Zhe Reported-by: weiyuchen Cc: Catalin Marinas Cc: Will Deacon Reviewed-by: Catalin Marinas Link: https://lore.kernel.org/r/20210802104200.21390-1-mark.rutland@arm.com Signed-off-by: Will Deacon [Mark: trivial conflict resolution for v5.10.y] Signed-off-by: Mark Rutland Signed-off-by: Greg Kroah-Hartman

drm/amdgpu/display: only enable aux backlight control for OLED panels

2021-08-12T11:22:20Z

[ Upstream commit f2ad3accefc63e72e9932e141c21875cc04beec8 ] We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac Acked-by: Rodrigo Siqueira Signed-off-by: Camille Cho Signed-off-by: Alex Deucher Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

smb3: rc uninitialized in one fallocate path

2021-08-12T11:22:20Z

[ Upstream commit 5ad4df56cd2158965f73416d41fce37906724822 ] Clang detected a problem with rc possibly being unitialized (when length is zero) in a recently added fallocate code path. Reported-by: kernel test robot Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French Signed-off-by: Sasha Levin

net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset

2021-08-12T11:22:20Z

[ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren Signed-off-by: Letu Ren Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

alpha: Send stop IPI to send to online CPUs

2021-08-12T11:22:20Z

[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by: Prarit Bhargava Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Matt Turner Signed-off-by: Sasha Levin

net: qede: Fix end of loop tests for list_for_each_entry

2021-08-12T11:22:20Z

[ Upstream commit 795e3d2ea68e489ee7039ac29e98bfea0e34a96c ] The list_for_each_entry() iterator, "vlan" in this code, can never be NULL so the warning will never be printed. Signed-off-by: Harshvardhan Jha Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

virt_wifi: fix error on connect

2021-08-12T11:22:20Z

[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ] When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

reiserfs: check directory items on read from disk

2021-08-12T11:22:19Z

[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ] While verifying the leaf item that we read from the disk, reiserfs doesn't check the directory items, this could cause a crash when we read a directory item from the disk that has an invalid deh_location. This patch adds a check to the directory items read from the disk that does a bounds check on deh_location for the directory entries. Any directory entry header with a directory entry offset greater than the item length is considered invalid. Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan Signed-off-by: Jan Kara Signed-off-by: Sasha Levin

reiserfs: add check for root_inode in reiserfs_fill_super

2021-08-12T11:22:19Z

[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ] Our syzcaller report a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0 Oops: 0010 [#1] SMP KASAN CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888114e779b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0 RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001 R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00 R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0 FS: 00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __lookup_slow+0x116/0x2d0 ? page_put_link+0x120/0x120 ? __d_lookup+0xfc/0x320 ? d_lookup+0x49/0x90 lookup_one_len+0x13c/0x170 ? __lookup_slow+0x2d0/0x2d0 ? reiserfs_schedule_old_flush+0x31/0x130 reiserfs_lookup_privroot+0x64/0x150 reiserfs_fill_super+0x158c/0x1b90 ? finish_unfinished+0xb10/0xb10 ? bprintf+0xe0/0xe0 ? __mutex_lock_slowpath+0x30/0x30 ? __kasan_check_write+0x20/0x30 ? up_write+0x51/0xb0 ? set_blocksize+0x9f/0x1f0 mount_bdev+0x27c/0x2d0 ? finish_unfinished+0xb10/0xb10 ? reiserfs_kill_sb+0x120/0x120 get_super_block+0x19/0x30 legacy_get_tree+0x76/0xf0 vfs_get_tree+0x49/0x160 ? capable+0x1d/0x30 path_mount+0xacc/0x1380 ? putname+0x97/0xd0 ? finish_automount+0x450/0x450 ? kmem_cache_free+0xf8/0x5a0 ? putname+0x97/0xd0 do_mount+0xe2/0x110 ? path_mount+0x1380/0x1380 ? copy_mount_options+0x69/0x140 __x64_sys_mount+0xf0/0x190 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae This is because 'root_inode' is initialized with wrong mode, and it's i_op is set to 'reiserfs_special_inode_operations'. Thus add check for 'root_inode' to fix the problem. Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com Signed-off-by: Yu Kuai Signed-off-by: Jan Kara Signed-off-by: Sasha Levin