user/sven/linux.git, branch v5.10.65

Linux 5.10.65

2021-09-15T07:50:49Z

Link: https://lore.kernel.org/r/20210913131100.316353015@linuxfoundation.org Tested-by: Fox Chen Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Pavel Machek (CIP) Tested-by: Jon Hunter Tested-by: Hulk Robot Tested-by: Guenter Roeck Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

clk: kirkwood: Fix a clocking boot regression

2021-09-15T07:50:48Z

commit aaedb9e00e5400220a8871180d23a83e67f29f63 upstream. Since a few kernel releases the Pogoplug 4 has crashed like this during boot: Unable to handle kernel NULL pointer dereference at virtual address 00000002 (...) [] (strlen) from [] (kstrdup+0x1c/0x4c) [] (kstrdup) from [] (__clk_register+0x44/0x37c) [] (__clk_register) from [] (clk_hw_register+0x20/0x44) [] (clk_hw_register) from [] (__clk_hw_register_mux+0x198/0x1e4) [] (__clk_hw_register_mux) from [] (clk_register_mux_table+0x5c/0x6c) [] (clk_register_mux_table) from [] (kirkwood_clk_muxing_setup.constprop.0+0x13c/0x1ac) [] (kirkwood_clk_muxing_setup.constprop.0) from [] (of_clk_init+0x12c/0x214) [] (of_clk_init) from [] (time_init+0x20/0x2c) [] (time_init) from [] (start_kernel+0x3dc/0x56c) [] (start_kernel) from [<00000000>] (0x0) Code: e3130020 1afffffb e12fff1e c08a1078 (e5d03000) This is because the "powersave" mux clock 0 was provided in an unterminated array, which is required by the loop in the driver: /* Count, allocate, and register clock muxes */ for (n = 0; desc[n].name;) n++; Here n will go out of bounds and then call clk_register_mux() on random memory contents after the mux clock. Fix this by terminating the array with a blank entry. Fixes: 105299381d87 ("cpufreq: kirkwood: use the powersave multiplexer") Cc: stable@vger.kernel.org Cc: Andrew Lunn Cc: Chris Packham Cc: Gregory CLEMENT Cc: Sebastian Hesselbarth Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20210814235514.403426-1-linus.walleij@linaro.org Reviewed-by: Andrew Lunn Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman

backlight: pwm_bl: Improve bootloader/kernel device handover

2021-09-15T07:50:48Z

commit 79fad92f2e596f5a8dd085788a24f540263ef887 upstream. Currently there are (at least) two problems in the way pwm_bl starts managing the enable_gpio pin. Both occur when the backlight is initially off and the driver finds the pin not already in output mode and, as a result, unconditionally switches it to output-mode and asserts the signal. Problem 1: This could cause the backlight to flicker since, at this stage in driver initialisation, we have no idea what the PWM and regulator are doing (an unconfigured PWM could easily "rest" at 100% duty cycle). Problem 2: This will cause us not to correctly honour the post_pwm_on_delay (which also risks flickers). Fix this by moving the code to configure the GPIO output mode until after we have examines the handover state. That allows us to initialize enable_gpio to off if the backlight is currently off and on if the backlight is on. Cc: stable@vger.kernel.org Reported-by: Marek Vasut Signed-off-by: Daniel Thompson Acked-by: Marek Vasut Tested-by: Marek Vasut Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

fbmem: don't allow too huge resolutions

2021-09-15T07:50:48Z

commit 8c28051cdcbe9dfcec6bd0a4709d67a09df6edae upstream. syzbot is reporting page fault at vga16fb_fillrect() [1], for vga16fb_check_var() is failing to detect multiplication overflow. if (vxres * vyres > maxmem) { vyres = maxmem / vxres; if (vyres < yres) return -ENOMEM; } Since no module would accept too huge resolutions where multiplication overflow happens, let's reject in the common path. Link: https://syzkaller.appspot.com/bug?extid=04168c8063cfdde1db5e [1] Reported-by: syzbot Debugged-by: Randy Dunlap Signed-off-by: Tetsuo Handa Reviewed-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/185175d6-227a-7b55-433d-b070929b262c@i-love.sakura.ne.jp Signed-off-by: Greg Kroah-Hartman

IMA: remove the dependency on CRYPTO_MD5

2021-09-15T07:50:48Z

commit 8510505d55e194d3f6c9644c9f9d12c4f6b0395a upstream. MD5 is a weak digest algorithm that shouldn't be used for cryptographic operation. It hinders the efficiency of a patch set that aims to limit the digests allowed for the extended file attribute namely security.ima. MD5 is no longer a requirement for IMA, nor should it be used there. The sole place where we still use the MD5 algorithm inside IMA is setting the ima_hash algorithm to MD5, if the user supplies 'ima_hash=md5' parameter on the command line. With commit ab60368ab6a4 ("ima: Fallback to the builtin hash algorithm"), setting "ima_hash=md5" fails gracefully when CRYPTO_MD5 is not set: ima: Can not allocate md5 (reason: -2) ima: Allocating md5 failed, going to use default hash algorithm sha256 Remove the CRYPTO_MD5 dependency for IMA. Signed-off-by: THOBY Simon Reviewed-by: Lakshmi Ramasubramanian [zohar@linux.ibm.com: include commit number in patch description for stable.] Cc: stable@vger.kernel.org # 4.17 Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman

IMA: remove -Wmissing-prototypes warning

2021-09-15T07:50:48Z

commit a32ad90426a9c8eb3915eed26e08ce133bd9e0da upstream. With W=1 build, the compiler throws warning message as below: security/integrity/ima/ima_mok.c:24:12: warning: no previous prototype for ‘ima_mok_init’ [-Wmissing-prototypes] __init int ima_mok_init(void) Silence the warning by adding static keyword to ima_mok_init(). Signed-off-by: Austin Kim Fixes: 41c89b64d718 ("IMA: create machine owner and blacklist keyrings") Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar Signed-off-by: Greg Kroah-Hartman

fuse: flush extending writes

2021-09-15T07:50:48Z

commit 59bda8ecee2ffc6a602b7bf2b9e43ca669cdbdcd upstream. Callers of fuse_writeback_range() assume that the file is ready for modification by the server in the supplied byte range after the call returns. If there's a write that extends the file beyond the end of the supplied range, then the file needs to be extended to at least the end of the range, but currently that's not done. There are at least two cases where this can cause problems: - copy_file_range() will return short count if the file is not extended up to end of the source range. - FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE will not extend the file, hence the region may not be fully allocated. Fix by flushing writes from the start of the range up to the end of the file. This could be optimized if the writes are non-extending, etc, but it's probably not worth the trouble. Fixes: a2bc92362941 ("fuse: fix copy_file_range() in the writeback case") Fixes: 6b1bdb56b17c ("fuse: allow fallocate(FALLOC_FL_ZERO_RANGE)") Cc: # v5.2 Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman

fuse: truncate pagecache on atomic_o_trunc

2021-09-15T07:50:48Z

commit 76224355db7570cbe6b6f75c8929a1558828dd55 upstream. fuse_finish_open() will be called with FUSE_NOWRITE in case of atomic O_TRUNC. This can deadlock with fuse_wait_on_page_writeback() in fuse_launder_page() triggered by invalidate_inode_pages2(). Fix by replacing invalidate_inode_pages2() in fuse_finish_open() with a truncate_pagecache() call. This makes sense regardless of FOPEN_KEEP_CACHE or fc->writeback cache, so do it unconditionally. Reported-by: Xie Yongji Reported-and-tested-by: syzbot+bea44a5189836d956894@syzkaller.appspotmail.com Fixes: e4648309b85a ("fuse: truncate pending writes on O_TRUNC") Cc: Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman

ARM: dts: at91: add pinctrl-{names, 0} for all gpios

2021-09-15T07:50:48Z

commit bf781869e5cf3e4ec1a47dad69b6f0df97629cbd upstream. Add pinctrl-names and pinctrl-0 properties on controllers that claims to use pins to avoid failures due to commit 2ab73c6d8323 ("gpio: Support GPIO controllers without pin-ranges") and also to avoid using pins that may be claimed my other IPs. Fixes: b7c2b6157079 ("ARM: at91: add Atmel's SAMA5D3 Xplained board") Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Fixes: 38153a017896 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Signed-off-by: Claudiu Beznea Signed-off-by: Nicolas Ferre Link: https://lore.kernel.org/r/20210727074006.1609989-1-claudiu.beznea@microchip.com Cc: # v5.7+ Signed-off-by: Greg Kroah-Hartman

KVM: nVMX: Unconditionally clear nested.pi_pending on nested VM-Enter

2021-09-15T07:50:48Z

commit f7782bb8d818d8f47c26b22079db10599922787a upstream. Clear nested.pi_pending on nested VM-Enter even if L2 will run without posted interrupts enabled. If nested.pi_pending is left set from a previous L2, vmx_complete_nested_posted_interrupt() will pick up the stale flag and exit to userspace with an "internal emulation error" due the new L2 not having a valid nested.pi_desc. Arguably, vmx_complete_nested_posted_interrupt() should first check for posted interrupts being enabled, but it's also completely reasonable that KVM wouldn't screw up a fundamental flag. Not to mention that the mere existence of nested.pi_pending is a long-standing bug as KVM shouldn't move the posted interrupt out of the IRR until it's actually processed, e.g. KVM effectively drops an interrupt when it performs a nested VM-Exit with a "pending" posted interrupt. Fixing the mess is a future problem. Prior to vmx_complete_nested_posted_interrupt() interpreting a null PI descriptor as an error, this was a benign bug as the null PI descriptor effectively served as a check on PI not being enabled. Even then, the new flow did not become problematic until KVM started checking the result of kvm_check_nested_events(). Fixes: 705699a13994 ("KVM: nVMX: Enable nested posted interrupt processing") Fixes: 966eefb89657 ("KVM: nVMX: Disable vmcs02 posted interrupts if vmcs12 PID isn't mappable") Fixes: 47d3530f86c0 ("KVM: x86: Exit to userspace when kvm_check_nested_events fails") Cc: stable@vger.kernel.org Cc: Jim Mattson Signed-off-by: Sean Christopherson Message-Id: <20210810144526.2662272-1-seanjc@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman