user/sven/linux.git, branch v5.10.69

Linux 5.10.69

2021-09-26T12:09:02Z

Link: https://lore.kernel.org/r/20210924124334.228235870@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Fox Chen Tested-by: Pavel Machek (CIP) Tested-by: Shuah Khan Tested-by: Salvatore Bonaccorso Link: https://lore.kernel.org/r/20210925120750.056868347@linuxfoundation.org Tested-by: Fox Chen Tested-by: Pavel Machek (CIP) Tested-by: Guenter Roeck Tested-by: Hulk Robot Signed-off-by: Greg Kroah-Hartman

drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

2021-09-26T12:09:02Z

commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream. nvkm test builds fail with the following error. drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info': drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5' The code builds on most architectures, but fails on parisc where ENOSYS is defined as 251. Replace the error code with -ENODEV (-19). The actual error code does not really matter and is not passed to userspace - it just has to be negative. Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs") Signed-off-by: Guenter Roeck Cc: Ben Skeggs Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

sched/idle: Make the idle timer expire in hard interrupt context

2021-09-26T12:09:02Z

[ Upstream commit 9848417926353daa59d2b05eb26e185063dbac6e ] The intel powerclamp driver will setup a per-CPU worker with RT priority. The worker will then invoke play_idle() in which it remains in the idle poll loop until it is stopped by the timer it started earlier. That timer needs to expire in hard interrupt context on PREEMPT_RT. Otherwise the timer will expire in ksoftirqd as a SOFT timer but that task won't be scheduled on the CPU because its priority is lower than the priority of the worker which is in the idle loop. Always expire the idle timer in hard interrupt context. Reported-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210906113034.jgfxrjdvxnjqgtmc@linutronix.de Signed-off-by: Sasha Levin

rtc: rx8010: select REGMAP_I2C

2021-09-26T12:09:02Z

[ Upstream commit 0c45d3e24ef3d3d87c5e0077b8f38d1372af7176 ] The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so depending on the configuration the build may fail. Fix it. Signed-off-by: Yu-Tung Chang Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com Signed-off-by: Sasha Levin

blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues

2021-09-26T12:09:01Z

[ Upstream commit 7f2a6a69f7ced6db8220298e0497cf60482a9d4b ] Limiting number of request to BLK_MAX_REQUEST_COUNT at blk_plug hurts performance for large md arrays. [1] shows resync speed of md array drops for md array with more than 16 HDDs. Fix this by allowing more request at plug queue. The multiple_queue flag is used to only apply higher limit to multiple queue cases. [1] https://lore.kernel.org/linux-raid/CAFDAVznS71BXW8Jxv6k9dXc2iR3ysX3iZRBww_rzA8WifBFxGg@mail.gmail.com/ Tested-by: Marcin Wanat Signed-off-by: Song Liu Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()

2021-09-26T12:09:01Z

[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ] The pending timer has been set up in blk_throtl_init(). However, the timer is not deleted in blk_throtl_exit(). This means that the timer handler may still be running after freeing the timer, which would result in a use-after-free. Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit(). Signed-off-by: Li Jinlin Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

pwm: stm32-lp: Don't modify HW state in .remove() callback

2021-09-26T12:09:01Z

[ Upstream commit d44084c93427bb0a9261432db1a8ca76a42d805e ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

pwm: rockchip: Don't modify HW state in .remove() callback

2021-09-26T12:09:01Z

[ Upstream commit 9d768cd7fd42bb0be16f36aec48548fca5260759 ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

pwm: img: Don't modify HW state in .remove() callback

2021-09-26T12:09:01Z

[ Upstream commit c68eb29c8e9067c08175dd0414f6984f236f719d ] A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing). Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

habanalabs: add validity check for event ID received from F/W

2021-09-26T12:09:01Z

[ Upstream commit a6c849012b0f51c674f52384bd9a4f3dc0a33c31 ] Currently there is no validity check for event ID received from F/W, Thus exposing driver to memory overrun. Signed-off-by: Ofir Bitton Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay Signed-off-by: Sasha Levin