user/sven/linux.git, branch v5.13.10

Linux 5.13.10

2021-08-12T11:32:27Z

Link: https://lore.kernel.org/r/20210810173000.928681411@linuxfoundation.org Tested-by: Fox Chen Tested-by: Linux Kernel Functional Testing Tested-by: Justin M. Forbes Tested-by: Guenter Roeck Tested-by: Shuah Khan Tested-by: Aakash Hemadri Signed-off-by: Greg Kroah-Hartman

HID: ft260: fix device removal due to USB disconnect

2021-08-12T11:32:27Z

[ Upstream commit db8d3a21275c807a4047a21bde3b57d49ca55d82 ] This commit fixes a functional regression introduced by the commit 82f09a637dd3 ("HID: ft260: improve error handling of ft260_hid_feature_report_get()") when upon USB disconnect, the FTDI FT260 i2c device is still available within the /dev folder. In my company's product, where the host USB to FT260 USB connection is hard-wired in the PCB, the issue is not reproducible. To reproduce it, I used the VirtualBox Ubuntu 20.04 VM and the UMFT260EV1A development module for the FTDI FT260 chip: Plug the UMFT260EV1A module into a USB port and attach it to VM. The VM shows 2 i2c devices under the /dev: michael@michael-VirtualBox:~$ ls /dev/i2c-* /dev/i2c-0 /dev/i2c-1 The i2c-0 is not related to the FTDI FT260: michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-0/name SMBus PIIX4 adapter at 4100 The i2c-1 is created by hid-ft260.ko: michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-1/name FT260 usb-i2c bridge on hidraw1 Now, detach the FTDI FT260 USB device from VM. We expect the /dev/i2c-1 to disappear, but it's still here: michael@michael-VirtualBox:~$ ls /dev/i2c-* /dev/i2c-0 /dev/i2c-1 And the kernel log shows: [ +0.001202] usb 2-2: USB disconnect, device number 3 [ +0.000109] ft260 0003:0403:6030.0002: failed to retrieve system status [ +0.000316] ft260 0003:0403:6030.0003: failed to retrieve system status It happens because the commit 82f09a637dd3 changed the ft260_get_system_config() return logic. This caused the ft260_is_interface_enabled() to exit with error upon the FT260 device USB disconnect, which in turn, aborted the ft260_remove() before deleting the FT260 i2c device and cleaning its sysfs stuff. This commit restores the FT260 USB removal functionality and improves the ft260_is_interface_enabled() code to handle correctly all chip modes defined by the device interface configuration pins DCNF0 and DCNF1. Signed-off-by: Michael Zaidman Acked-by: Aaron Jones (FTDI-UK) Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

platform/x86: gigabyte-wmi: add support for B550 Aorus Elite V2

2021-08-12T11:32:27Z

[ Upstream commit 2b2c66f607d00d17f879c0d946d44340bfbdc501 ] Reported as working here: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-879398883 Signed-off-by: Thomas Weißschuh Link: https://lore.kernel.org/r/20210726153630.65213-1-linux@weissschuh.net Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin

drm/amdgpu/display: only enable aux backlight control for OLED panels

2021-08-12T11:32:27Z

[ Upstream commit f2ad3accefc63e72e9932e141c21875cc04beec8 ] We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac Acked-by: Rodrigo Siqueira Signed-off-by: Camille Cho Signed-off-by: Alex Deucher Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

smb3: rc uninitialized in one fallocate path

2021-08-12T11:32:27Z

[ Upstream commit 5ad4df56cd2158965f73416d41fce37906724822 ] Clang detected a problem with rc possibly being unitialized (when length is zero) in a recently added fallocate code path. Reported-by: kernel test robot Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French Signed-off-by: Sasha Levin

net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset

2021-08-12T11:32:27Z

[ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren Signed-off-by: Letu Ren Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

alpha: Send stop IPI to send to online CPUs

2021-08-12T11:32:26Z

[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by: Prarit Bhargava Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Matt Turner Signed-off-by: Sasha Levin

net: qede: Fix end of loop tests for list_for_each_entry

2021-08-12T11:32:26Z

[ Upstream commit 795e3d2ea68e489ee7039ac29e98bfea0e34a96c ] The list_for_each_entry() iterator, "vlan" in this code, can never be NULL so the warning will never be printed. Signed-off-by: Harshvardhan Jha Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

virt_wifi: fix error on connect

2021-08-12T11:32:26Z

[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ] When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

reiserfs: check directory items on read from disk

2021-08-12T11:32:26Z

[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ] While verifying the leaf item that we read from the disk, reiserfs doesn't check the directory items, this could cause a crash when we read a directory item from the disk that has an invalid deh_location. This patch adds a check to the directory items read from the disk that does a bounds check on deh_location for the directory entries. Any directory entry header with a directory entry offset greater than the item length is considered invalid. Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan Signed-off-by: Jan Kara Signed-off-by: Sasha Levin