user/sven/linux.git, branch v5.15.26

Linux 5.15.26

2022-03-02T10:48:10Z

Link: https://lore.kernel.org/r/20220228172347.614588246@linuxfoundation.org Tested-by: Shuah Khan Tested-by: Florian Fainelli Tested-by: Ron Economos Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Tested-by: Bagas Sanjaya Tested-by: Sudip Mukherjee Tested-by: Allen Pais Tested-by: Guenter Roeck Tested-by: Slade Watkins Signed-off-by: Greg Kroah-Hartman

ice: fix concurrent reset and removal of VFs

2022-03-02T10:48:10Z

commit fadead80fe4c033b5e514fcbadd20b55c4494112 upstream. Commit c503e63200c6 ("ice: Stop processing VF messages during teardown") introduced a driver state flag, ICE_VF_DEINIT_IN_PROGRESS, which is intended to prevent some issues with concurrently handling messages from VFs while tearing down the VFs. This change was motivated by crashes caused while tearing down and bringing up VFs in rapid succession. It turns out that the fix actually introduces issues with the VF driver caused because the PF no longer responds to any messages sent by the VF during its .remove routine. This results in the VF potentially removing its DMA memory before the PF has shut down the device queues. Additionally, the fix doesn't actually resolve concurrency issues within the ice driver. It is possible for a VF to initiate a reset just prior to the ice driver removing VFs. This can result in the remove task concurrently operating while the VF is being reset. This results in similar memory corruption and panics purportedly fixed by that commit. Fix this concurrency at its root by protecting both the reset and removal flows using the existing VF cfg_lock. This ensures that we cannot remove the VF while any outstanding critical tasks such as a virtchnl message or a reset are occurring. This locking change also fixes the root cause originally fixed by commit c503e63200c6 ("ice: Stop processing VF messages during teardown"), so we can simply revert it. Note that I kept these two changes together because simply reverting the original commit alone would leave the driver vulnerable to worse race conditions. Fixes: c503e63200c6 ("ice: Stop processing VF messages during teardown") Cc: # e6ba5273d4ed: ice: Fix race conditions between virtchnl handling and VF ndo ops Cc: Signed-off-by: Jacob Keller Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen Signed-off-by: Greg Kroah-Hartman

ice: Fix race conditions between virtchnl handling and VF ndo ops

2022-03-02T10:48:10Z

commit e6ba5273d4ede03d075d7a116b8edad1f6115f4d upstream. The VF can be configured via the PF's ndo ops at the same time the PF is receiving/handling virtchnl messages. This has many issues, with one of them being the ndo op could be actively resetting a VF (i.e. resetting it to the default state and deleting/re-adding the VF's VSI) while a virtchnl message is being handled. The following error was seen because a VF ndo op was used to change a VF's trust setting while the VIRTCHNL_OP_CONFIG_VSI_QUEUES was ongoing: [35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM [35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5 [35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6 Fix this by making sure the virtchnl handling and VF ndo ops that trigger VF resets cannot run concurrently. This is done by adding a struct mutex cfg_lock to each VF structure. For VF ndo ops, the mutex will be locked around the critical operations and VFR. Since the ndo ops will trigger a VFR, the virtchnl thread will use mutex_trylock(). This is done because if any other thread (i.e. VF ndo op) has the mutex, then that means the current VF message being handled is no longer valid, so just ignore it. This issue can be seen using the following commands: for i in {0..50}; do rmmod ice modprobe ice sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on sleep 2 echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on done Fixes: 7c710869d64e ("ice: Add handlers for VF netdevice operations") Cc: Signed-off-by: Brett Creeley Tested-by: Konrad Jankowski Signed-off-by: Tony Nguyen [I had to fix the cherry-pick manually as the patch added a line around some context that was missing.] Signed-off-by: Jacob Keller Signed-off-by: Greg Kroah-Hartman

memblock: use kfree() to release kmalloced memblock regions

2022-03-02T10:48:10Z

commit c94afc46cae7ad41b2ad6a99368147879f4b0e56 upstream. memblock.{reserved,memory}.regions may be allocated using kmalloc() in memblock_double_array(). Use kfree() to release these kmalloced regions indicated by memblock_{reserved,memory}_in_slab. Signed-off-by: Miaohe Lin Fixes: 3010f876500f ("mm: discard memblock data later") Signed-off-by: Mike Rapoport Signed-off-by: Greg Kroah-Hartman

gpio: tegra186: Fix chip_data type confusion

2022-03-02T10:48:10Z

commit d1e972ace42390de739cde87d96043dcbe502286 upstream. The tegra186 GPIO driver makes the assumption that the pointer returned by irq_data_get_irq_chip_data() is a pointer to a tegra_gpio structure. Unfortunately, it is actually a pointer to the inner gpio_chip structure, as mandated by the gpiolib infrastructure. Nice try. The saving grace is that the gpio_chip is the first member of tegra_gpio, so the bug has gone undetected since... forever. Fix it by performing a container_of() on the pointer. This results in no additional code, and makes it possible to understand how the whole thing works. Fixes: 5b2b135a87fc ("gpio: Add Tegra186 support") Signed-off-by: Marc Zyngier Cc: Thierry Reding Cc: Linus Walleij Cc: Bartosz Golaszewski Link: https://lore.kernel.org/r/20220211093904.1112679-1-maz@kernel.org Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: k210: Fix bias-pull-up

2022-03-02T10:48:09Z

commit e9f7b9228a94778edb7a63fde3c0a3c5bb793064 upstream. Using bias-pull-up would actually cause the pin to have its pull-down enabled. Fix this. Signed-off-by: Sean Anderson Reviewed-by: Damien Le Moal Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Link: https://lore.kernel.org/r/20220209182822.640905-1-seanga2@gmail.com Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

pinctrl: fix loop in k210_pinconf_get_drive()

2022-03-02T10:48:09Z

commit ba2ab85951c91a140a8fa51d8347d54e59ec009d upstream. The loop exited too early so the k210_pinconf_drive_strength[0] array element was never used. Fixes: d4c34d09ab03 ("pinctrl: Add RISC-V Canaan Kendryte K210 FPIOA driver") Signed-off-by: Dan Carpenter Reviewed-by: Damien Le Moal Reviewed-by: Sean Anderson Link: https://lore.kernel.org/r/20220209180804.GA18385@kili Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix deadlock in gsmtty_open()

2022-03-02T10:48:09Z

commit a2ab75b8e76e455af7867e3835fd9cdf386b508f upstream. In the current implementation the user may open a virtual tty which then could fail to establish the underlying DLCI. The function gsmtty_open() gets stuck in tty_port_block_til_ready() while waiting for a carrier rise. This happens if the remote side fails to acknowledge the link establishment request in time or completely. At some point gsm_dlci_close() is called to abort the link establishment attempt. The function tries to inform the associated virtual tty by performing a hangup. But the blocking loop within tty_port_block_til_ready() is not informed about this event. The patch proposed here fixes this by resetting the initialization state of the virtual tty to ensure the loop exits and triggering it to make tty_port_block_til_ready() return. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-7-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix wrong modem processing in convergence layer type 2

2022-03-02T10:48:09Z

commit 687f9ad43c52501f46164758e908a5dd181a87fc upstream. The function gsm_process_modem() exists to handle modem status bits of incoming frames. This includes incoming MSC (modem status command) frames and convergence layer type 2 data frames. The function, however, was only designed to handle MSC frames as it expects the command length. Within gsm_dlci_data() it is wrongly assumed that this is the same as the data frame length. This is only true if the data frame contains only 1 byte of payload. This patch names the length parameter of gsm_process_modem() in a generic manner to reflect its association. It also corrects all calls to the function to handle the variable number of modem status octets correctly in both cases. Fixes: 7263287af93d ("tty: n_gsm: Fixed logic to decode break signal from modem status") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-6-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix wrong tty control line for flow control

2022-03-02T10:48:09Z

commit c19d93542a6081577e6da9bf5e887979c72e80c1 upstream. tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle(). Both functions propagate the outgoing hardware flow control state to the remote side via MSC (modem status command) frames. The local state is taken from the RTS (ready to send) flag of the tty. However, RTS gets mapped to DTR (data terminal ready), which is wrong. This patch corrects this by mapping RTS to RTS. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220218073123.2121-5-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman