user/sven/linux.git, branch v5.15.86

Linux 5.15.86

2022-12-31T12:14:48Z

Link: https://lore.kernel.org/r/20221228144256.536395940@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Slade Watkins Tested-by: Bagas Sanjaya Tested-by: Ron Economos Tested-by: Thierry Reding Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Link: https://lore.kernel.org/r/20221230094021.575121238@linuxfoundation.org Tested-by: Slade Watkins Tested-by: Florian Fainelli Tested-by: Bagas Sanjaya Tested-by: Linux Kernel Functional Testing Tested-by: Ron Economos Signed-off-by: Greg Kroah-Hartman

pwm: tegra: Fix 32 bit build

2022-12-31T12:14:48Z

[ Upstream commit dd1f1da4ada5d8ac774c2ebe97230637820b3323 ] The value of NSEC_PER_SEC << PWM_DUTY_WIDTH doesn't fix within a 32 bit integer causing a build warning/error (and the value truncated): drivers/pwm/pwm-tegra.c: In function ‘tegra_pwm_config’: drivers/pwm/pwm-tegra.c:148:53: error: result of ‘1000000000 << 8’ requires 39 bits to represent, but ‘long int’ only has 32 bits [-Werror=shift-overflow=] 148 | required_clk_rate = DIV_ROUND_UP_ULL(NSEC_PER_SEC << PWM_DUTY_WIDTH, | ^~ Explicitly cast to a u64 to ensure the correct result. Fixes: cfcb68817fb3 ("pwm: tegra: Improve required rate calculation") Signed-off-by: Steven Price Reviewed-by: Uwe Kleine-König Reviewed-by: Jon Hunter Signed-off-by: Sasha Levin

mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code

2022-12-31T12:14:48Z

[ Upstream commit e48dee96046246980d476714b3f6684d45f29c13 ] Use devm_of_platform_populate() instead of hand-writing it. This simplifies the code. Signed-off-by: Christophe JAILLET Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/fd997dc92b9cee219e9c55e22959a94f4bbf570b.1668949256.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin

extcon: usbc-tusb320: Call the Type-C IRQ handler only if a port is registered

2022-12-31T12:14:48Z

commit 341fd15e2e18c24d5c738496cfc3d7a272241201 upstream. Commit bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support") added an optional Type-C interface to the driver but missed to check if it is in use when calling the IRQ handler. This causes an oops on devices currently using the old extcon interface. Check if a Type-C port is registered before calling the Type-C IRQ handler. Fixes: bf7571c00dca ("extcon: usbc-tusb320: Add USB TYPE-C support") Signed-off-by: Yassine Oudjana Reviewed-by: Marek Vasut Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20221107153317.657803-1-y.oudjana@protonmail.com Signed-off-by: Greg Kroah-Hartman

media: dvbdev: fix refcnt bug

2022-12-31T12:14:47Z

commit 3a664569b71b0a52be5ffb9fb87cc4f83d29bd71 upstream. Previous commit initialize the dvbdev->ref before the template copy, which will overwrite the reference and cause refcnt bug. refcount_t: addition on 0; use-after-free. WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc6-next-20221128-syzkaller #0 ... RIP: 0010:refcount_warn_saturate+0x17c/0x1f0 lib/refcount.c:25 RSP: 0000:ffffc900000678d0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88813ff58000 RSI: ffffffff81660e7c RDI: fffff5200000cf0c RBP: ffff888022a45010 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000080000000 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff88823ffff000 CR3: 000000000c48e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __refcount_add include/linux/refcount.h:199 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] kref_get include/linux/kref.h:45 [inline] dvb_device_get drivers/media/dvb-core/dvbdev.c:585 [inline] dvb_register_device+0xe83/0x16e0 drivers/media/dvb-core/dvbdev.c:517 ... Just place the kref_init at correct position. Reported-by: syzbot+fce48a3dd3368645bd6c@syzkaller.appspotmail.com Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF") Signed-off-by: Lin Ma Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: dvbdev: fix build warning due to comments

2022-12-31T12:14:47Z

commit 3edfd14bb50fa6f94ed1a37bbb17d9f1c2793b57 upstream. Previous commit that introduces reference counter does not add proper comments, which will lead to warning when building htmldocs. Fix them. Reported-by: "Stephen Rothwell" Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF") Signed-off-by: Lin Ma Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

net: stmmac: fix errno when create_singlethread_workqueue() fails

2022-12-31T12:14:47Z

commit 2cb815cfc78b137ee38bcd65e7c955d6cc2cc250 upstream. We should set the return value to -ENOMEM explicitly when create_singlethread_workqueue() fails in stmmac_dvr_probe(), otherwise we'll lose the error value. Fixes: a137f3f27f92 ("net: stmmac: fix possible memory leak in stmmac_dvr_probe()") Signed-off-by: Gaosheng Cui Reviewed-by: Leon Romanovsky Link: https://lore.kernel.org/r/20221214080117.3514615-1-cuigaosheng1@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix crash when I/O abort times out

2022-12-31T12:14:47Z

commit 68ad83188d782b2ecef2e41ac245d27e0710fe8e upstream. While performing CPU hotplug, a crash with the following stack was seen: Call Trace: qla24xx_process_response_queue+0x42a/0x970 [qla2xxx] qla2x00_start_nvme_mq+0x3a2/0x4b0 [qla2xxx] qla_nvme_post_cmd+0x166/0x240 [qla2xxx] nvme_fc_start_fcp_op.part.0+0x119/0x2e0 [nvme_fc] blk_mq_dispatch_rq_list+0x17b/0x610 __blk_mq_sched_dispatch_requests+0xb0/0x140 blk_mq_sched_dispatch_requests+0x30/0x60 __blk_mq_run_hw_queue+0x35/0x90 __blk_mq_delay_run_hw_queue+0x161/0x180 blk_execute_rq+0xbe/0x160 __nvme_submit_sync_cmd+0x16f/0x220 [nvme_core] nvmf_connect_admin_queue+0x11a/0x170 [nvme_fabrics] nvme_fc_create_association.cold+0x50/0x3dc [nvme_fc] nvme_fc_connect_ctrl_work+0x19/0x30 [nvme_fc] process_one_work+0x1e8/0x3c0 On abort timeout, completion was called without checking if the I/O was already completed. Verify that I/O and abort request are indeed outstanding before attempting completion. Fixes: 71c80b75ce8f ("scsi: qla2xxx: Do command completion on abort timeout") Reported-by: Marco Patalano Tested-by: Marco Patalano Cc: stable@vger.kernel.org Signed-off-by: Arun Easi Signed-off-by: Nilesh Javali Link: https://lore.kernel.org/r/20221129092634.15347-1-njavali@marvell.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range

2022-12-31T12:14:47Z

commit 162d053e15fe985f754ef495a96eb3db970c43ed upstream. If we get -ENOMEM while dropping file extent items in a given range, at btrfs_drop_extents(), due to failure to allocate memory when attempting to increment the reference count for an extent or drop the reference count, we handle it with a BUG_ON(). This is excessive, instead we can simply abort the transaction and return the error to the caller. In fact most callers of btrfs_drop_extents(), directly or indirectly, already abort the transaction if btrfs_drop_extents() returns any error. Also, we already have error paths at btrfs_drop_extents() that may return -ENOMEM and in those cases we abort the transaction, like for example anything that changes the b+tree may return -ENOMEM due to a failure to allocate a new extent buffer when COWing an existing extent buffer, such as a call to btrfs_duplicate_item() for example. So replace the BUG_ON() calls with proper logic to abort the transaction and return the error. Reported-by: syzbot+0b1fb6b0108c27419f9f@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/00000000000089773e05ee4b9cb4@google.com/ CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

ovl: fix use inode directly in rcu-walk mode

2022-12-31T12:14:47Z

commit 672e4268b2863d7e4978dfed29552b31c2f9bd4e upstream. ovl_dentry_revalidate_common() can be called in rcu-walk mode. As document said, "in rcu-walk mode, d_parent and d_inode should not be used without care". Check inode here to protect access under rcu-walk mode. Fixes: bccece1ead36 ("ovl: allow remote upper") Reported-and-tested-by: syzbot+a4055c78774bbf3498bb@syzkaller.appspotmail.com Signed-off-by: Chen Zhongjin Cc: # v5.7 Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman