user/sven/linux.git, branch v5.15.89

Linux 5.15.89

2023-01-18T10:48:59Z

Link: https://lore.kernel.org/r/20230116154747.036911298@linuxfoundation.org Tested-by: Shuah Khan Tested-by: Bagas Sanjaya Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Tested-by: Allen Pais Tested-by: Guenter Roeck Tested-by: Kelsey Steele Tested-by: Ron Economos Signed-off-by: Greg Kroah-Hartman

pinctrl: amd: Add dynamic debugging for active GPIOs

2023-01-18T10:48:59Z

commit 1d66e379731f79ae5039a869c0fde22a4f6a6a91 upstream. Some laptops have been reported to wake up from s2idle when plugging in the AC adapter or by closing the lid. This is a surprising behavior that is further clarified by commit cb3e7d624c3ff ("PM: wakeup: Add extra debugging statement for multiple active IRQs"). With that commit in place the following interaction can be seen when the lid is closed: [ 28.946038] PM: suspend-to-idle [ 28.946083] ACPI: EC: ACPI EC GPE status set [ 28.946101] ACPI: PM: Rearming ACPI SCI for wakeup [ 28.950152] Timekeeping suspended for 3.320 seconds [ 28.950152] PM: Triggering wakeup from IRQ 9 [ 28.950152] ACPI: EC: ACPI EC GPE status set [ 28.950152] ACPI: EC: ACPI EC GPE dispatched [ 28.995057] ACPI: EC: ACPI EC work flushed [ 28.995075] ACPI: PM: Rearming ACPI SCI for wakeup [ 28.995131] PM: Triggering wakeup from IRQ 9 [ 28.995271] ACPI: EC: ACPI EC GPE status set [ 28.995291] ACPI: EC: ACPI EC GPE dispatched [ 29.098556] ACPI: EC: ACPI EC work flushed [ 29.207020] ACPI: EC: ACPI EC work flushed [ 29.207037] ACPI: PM: Rearming ACPI SCI for wakeup [ 29.211095] Timekeeping suspended for 0.739 seconds [ 29.211095] PM: Triggering wakeup from IRQ 9 [ 29.211079] PM: Triggering wakeup from IRQ 7 [ 29.211095] ACPI: PM: ACPI non-EC GPE wakeup [ 29.211095] PM: resume from suspend-to-idle * IRQ9 on this laptop is used for the ACPI SCI. * IRQ7 on this laptop is used for the GPIO controller. What has occurred is when the lid was closed the EC woke up the SoC from it's deepest sleep state and the kernel's s2idle loop processed all EC events. When it was finished processing EC events, it checked for any other reasons to wake (break the s2idle loop). The IRQ for the GPIO controller was active so the loop broke, and then this IRQ was processed. This is not a kernel bug but it is certainly a surprising behavior, and to better debug it we should have a dynamic debugging message that we can enact to catch it. Acked-by: Basavaraj Natikar Acked-by: Kai-Heng Feng Acked-by: Mark Pearson Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20221013134729.5592-2-mario.limonciello@amd.com Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"

2023-01-18T10:48:58Z

commit b659b613cea2ae39746ca8bd2b69d1985dd9d770 upstream. This reverts commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac. This patch results in some qemu test failures, specifically xilinx-zynq-a9 machine and zynq-zc702 as well as zynq-zed devicetree files, when trying to boot from USB drive. Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/ Fixes: 8a7b31d545d3 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout") Cc: stable@vger.kernel.org Reported-by: Guenter Roeck Signed-off-by: Ferry Toth Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman

block: handle bio_split_to_limits() NULL return

2023-01-18T10:48:58Z

commit 613b14884b8595e20b9fac4126bf627313827fbe upstream. This can't happen right now, but in preparation for allowing bio_split_to_limits() returning NULL if it ended the bio, check for it in all the callers. Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

io_uring/io-wq: only free worker if it was allocated for creation

2023-01-18T10:48:58Z

commit e6db6f9398dadcbc06318a133d4c44a2d3844e61 upstream. We have two types of task_work based creation, one is using an existing worker to setup a new one (eg when going to sleep and we have no free workers), and the other is allocating a new worker. Only the latter should be freed when we cancel task_work creation for a new worker. Fixes: af82425c6a2d ("io_uring/io-wq: free worker if task_work creation is canceled") Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

io_uring/io-wq: free worker if task_work creation is canceled

2023-01-18T10:48:58Z

commit af82425c6a2d2f347c79b63ce74fca6dc6be157f upstream. If we cancel the task_work, the worker will never come into existance. As this is the last reference to it, ensure that we get it freed appropriately. Cc: stable@vger.kernel.org Reported-by: 진호 Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

scsi: mpt3sas: Remove scsi_dma_map() error messages

2023-01-18T10:48:58Z

commit 0c25422d34b4726b2707d5f38560943155a91b80 upstream. When scsi_dma_map() fails by returning a sges_left value less than zero, the amount of logging produced can be extremely high. In a recent end-user environment, 1200 messages per second were being sent to the log buffer. This eventually overwhelmed the system and it stalled. These error messages are not needed. Remove them. Link: https://lore.kernel.org/r/20220303140203.12642-1-sreekanth.reddy@broadcom.com Suggested-by: Christoph Hellwig Signed-off-by: Sreekanth Reddy Signed-off-by: Martin K. Petersen Cc: Paul Menzel Signed-off-by: Greg Kroah-Hartman

efi: fix NULL-deref in init error path

2023-01-18T10:48:58Z

[ Upstream commit 703c13fe3c9af557d312f5895ed6a5fda2711104 ] In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer. Fixes: 98086df8b70c ("efi: add missed destroy_workqueue when efisubsys_init fails") Cc: stable@vger.kernel.org Cc: Li Heng Signed-off-by: Johan Hovold Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin

arm64: cmpxchg_double*: hazard against entire exchange variable

2023-01-18T10:48:58Z

[ Upstream commit 031af50045ea97ed4386eb3751ca2c134d0fc911 ] The inline assembly for arm64's cmpxchg_double*() implementations use a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a pointer to unsigned long, and thus the hazard only applies to the first 8 bytes of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, leading to a number of potential problems. This is similar to what we fixed back in commit: fee960bed5e857eb ("arm64: xchg: hazard against entire exchange variable") ... but we forgot to adjust cmpxchg_double*() similarly at the same time. The same problem applies, as demonstrated with the following test: | struct big { | u64 lo, hi; | } __aligned(128); | | unsigned long foo(struct big *b) | { | u64 hi_old, hi_new; | | hi_old = b->hi; | cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78); | hi_new = b->hi; | | return hi_old ^ hi_new; | } ... which GCC 12.1.0 compiles as: | 0000000000000000 : | 0: d503233f paciasp | 4: aa0003e4 mov x4, x0 | 8: 1400000e b 40 | c: d2800240 mov x0, #0x12 // #18 | 10: d2800681 mov x1, #0x34 // #52 | 14: aa0003e5 mov x5, x0 | 18: aa0103e6 mov x6, x1 | 1c: d2800ac2 mov x2, #0x56 // #86 | 20: d2800f03 mov x3, #0x78 // #120 | 24: 48207c82 casp x0, x1, x2, x3, [x4] | 28: ca050000 eor x0, x0, x5 | 2c: ca060021 eor x1, x1, x6 | 30: aa010000 orr x0, x0, x1 | 34: d2800000 mov x0, #0x0 // #0 <--- BANG | 38: d50323bf autiasp | 3c: d65f03c0 ret | 40: d2800240 mov x0, #0x12 // #18 | 44: d2800681 mov x1, #0x34 // #52 | 48: d2800ac2 mov x2, #0x56 // #86 | 4c: d2800f03 mov x3, #0x78 // #120 | 50: f9800091 prfm pstl1strm, [x4] | 54: c87f1885 ldxp x5, x6, [x4] | 58: ca0000a5 eor x5, x5, x0 | 5c: ca0100c6 eor x6, x6, x1 | 60: aa0600a6 orr x6, x5, x6 | 64: b5000066 cbnz x6, 70 | 68: c8250c82 stxp w5, x2, x3, [x4] | 6c: 35ffff45 cbnz w5, 54 | 70: d2800000 mov x0, #0x0 // #0 <--- BANG | 74: d50323bf autiasp | 78: d65f03c0 ret Notice that at the lines with "BANG" comments, GCC has assumed that the higher 8 bytes are unchanged by the cmpxchg_double() call, and that `hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and LL/SC versions of cmpxchg_double(). This patch fixes the issue by passing a pointer to __uint128_t into the +Q constraint, ensuring that the compiler hazards against the entire 16 bytes being modified. With this change, GCC 12.1.0 compiles the above test as: | 0000000000000000 : | 0: f9400407 ldr x7, [x0, #8] | 4: d503233f paciasp | 8: aa0003e4 mov x4, x0 | c: 1400000f b 48 | 10: d2800240 mov x0, #0x12 // #18 | 14: d2800681 mov x1, #0x34 // #52 | 18: aa0003e5 mov x5, x0 | 1c: aa0103e6 mov x6, x1 | 20: d2800ac2 mov x2, #0x56 // #86 | 24: d2800f03 mov x3, #0x78 // #120 | 28: 48207c82 casp x0, x1, x2, x3, [x4] | 2c: ca050000 eor x0, x0, x5 | 30: ca060021 eor x1, x1, x6 | 34: aa010000 orr x0, x0, x1 | 38: f9400480 ldr x0, [x4, #8] | 3c: d50323bf autiasp | 40: ca0000e0 eor x0, x7, x0 | 44: d65f03c0 ret | 48: d2800240 mov x0, #0x12 // #18 | 4c: d2800681 mov x1, #0x34 // #52 | 50: d2800ac2 mov x2, #0x56 // #86 | 54: d2800f03 mov x3, #0x78 // #120 | 58: f9800091 prfm pstl1strm, [x4] | 5c: c87f1885 ldxp x5, x6, [x4] | 60: ca0000a5 eor x5, x5, x0 | 64: ca0100c6 eor x6, x6, x1 | 68: aa0600a6 orr x6, x5, x6 | 6c: b5000066 cbnz x6, 78 | 70: c8250c82 stxp w5, x2, x3, [x4] | 74: 35ffff45 cbnz w5, 5c | 78: f9400480 ldr x0, [x4, #8] | 7c: d50323bf autiasp | 80: ca0000e0 eor x0, x7, x0 | 84: d65f03c0 ret ... sampling the high 8 bytes before and after the cmpxchg, and performing an EOR, as we'd expect. For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note that linux-4.9.y is oldest currently supported stable release, and mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run on my machines due to library incompatibilities. I've also used a standalone test to check that we can use a __uint128_t pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM 3.9.1. Fixes: 5284e1b4bc8a ("arm64: xchg: Implement cmpxchg_double") Fixes: e9a4b795652f ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU") Reported-by: Boqun Feng Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/ Reported-by: Peter Zijlstra Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/ Signed-off-by: Mark Rutland Cc: stable@vger.kernel.org Cc: Arnd Bergmann Cc: Catalin Marinas Cc: Steve Capper Cc: Will Deacon Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

arm64: atomics: remove LL/SC trampolines

2023-01-18T10:48:58Z

[ Upstream commit b2c3ccbd0011bb3b51d0fec24cb3a5812b1ec8ea ] When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in a fragment of code being generated in a subsection without a clear association with its caller. A trampoline in the caller branches to the LL/SC atomic with with a direct branch, and the atomic directly branches back into its trampoline. This breaks backtracing, as any PC within the out-of-line fragment will be symbolized as an offset from the nearest prior symbol (which may not be the function using the atomic), and since the atomic returns with a direct branch, the caller's PC may be missing from the backtrace. For example, with secondary_start_kernel() hacked to contain atomic_inc(NULL), the resulting exception can be reported as being taken from cpus_are_stuck_in_kernel(): | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | [0000000000000000] user address but active_mm is swapper | Internal error: Oops: 96000004 [#1] PREEMPT SMP | Modules linked in: | CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19.0-11219-geb555cb5b794-dirty #3 | Hardware name: linux,dummy-virt (DT) | pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : cpus_are_stuck_in_kernel+0xa4/0x120 | lr : secondary_start_kernel+0x164/0x170 | sp : ffff80000a4cbe90 | x29: ffff80000a4cbe90 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 | x20: 0000000000000001 x19: 0000000000000001 x18: 0000000000000008 | x17: 3030383832343030 x16: 3030303030307830 x15: ffff80000a4cbab0 | x14: 0000000000000001 x13: 5d31666130663133 x12: 3478305b20313030 | x11: 3030303030303078 x10: 3020726f73736563 x9 : 726f737365636f72 | x8 : ffff800009ff2ef0 x7 : 0000000000000003 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000100 | x2 : 0000000000000000 x1 : ffff0000029bd880 x0 : 0000000000000000 | Call trace: | cpus_are_stuck_in_kernel+0xa4/0x120 | __secondary_switched+0xb0/0xb4 | Code: 35ffffa3 17fffc6c d53cd040 f9800011 (885f7c01) | ---[ end trace 0000000000000000 ]--- This is confusing and hinders debugging, and will be problematic for CONFIG_LIVEPATCH as these cases cannot be unwound reliably. This is very similar to recent issues with out-of-line exception fixups, which were removed in commits: 35d67794b8828333 ("arm64: lib: __arch_clear_user(): fold fixups into body") 4012e0e22739eef9 ("arm64: lib: __arch_copy_from_user(): fold fixups into body") 139f9ab73d60cf76 ("arm64: lib: __arch_copy_to_user(): fold fixups into body") When the trampolines were introduced in commit: addfc38672c73efd ("arm64: atomics: avoid out-of-line ll/sc atomics") The rationale was to improve icache performance by grouping the LL/SC atomics together. This has never been measured, and this theoretical benefit is outweighed by other factors: * As the subsections are collapsed into sections at object file granularity, these are spread out throughout the kernel and can share cachelines with unrelated code regardless. * GCC 12.1.0 has been observed to place the trampoline out-of-line in specialised __ll_sc_*() functions, introducing more branching than was intended. * Removing the trampolines has been observed to shrink a defconfig kernel Image by 64KiB when building with GCC 12.1.0. This patch removes the LL/SC trampolines, meaning that the LL/SC atomics will be inlined into their callers (or placed in out-of line functions using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC atomics are always called in an unlikely branch, and will be placed in a cold portion of the function, so this should have minimal impact to the hot paths. Other than the improved backtracing, there should be no functional change as a result of this patch. Signed-off-by: Mark Rutland Cc: Will Deacon Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable") Signed-off-by: Sasha Levin