user/sven/linux.git, branch v5.18.1

Linux 5.18.1

2022-05-30T07:24:09Z

Link: https://lore.kernel.org/r/20220527084801.223648383@linuxfoundation.org Tested-by: Ronald Warsow Tested-by: Justin M. Forbes Tested-by: Ron Economos Tested-by: Bagas Sanjaya Tested-by: Linux Kernel Functional Testing Tested-by: Rudi Heitbaum Signed-off-by: Greg Kroah-Hartman

ALSA: ctxfi: Add SB046x PCI ID

2022-05-30T07:24:09Z

commit 1b073ebb174d0c7109b438e0a5eb4495137803ec upstream. Adds the PCI ID for X-Fi cards sold under the Platnum and XtremeMusic names Before: snd_ctxfi 0000:05:05.0: chip 20K1 model Unknown (1102:0021) is found After: snd_ctxfi 0000:05:05.0: chip 20K1 model SB046x (1102:0021) is found [ This is only about defining the model name string, and the rest is handled just like before, as a default unknown device. Edward confirmed that the stuff has been working fine -- tiwai ] Signed-off-by: Edward Matijevic Cc: Link: https://lore.kernel.org/r/cae7d1a4-8bd9-7dfe-7427-db7e766f7272@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

ACPI: sysfs: Fix BERT error region memory mapping

2022-05-30T07:24:09Z

commit 1bbc21785b7336619fb6a67f1fff5afdaf229acc upstream. Currently the sysfs interface maps the BERT error region as "memory" (through acpi_os_map_memory()) in order to copy the error records into memory buffers through memory operations (eg memory_read_from_buffer()). The OS system cannot detect whether the BERT error region is part of system RAM or it is "device memory" (eg BMC memory) and therefore it cannot detect which memory attributes the bus to memory support (and corresponding kernel mapping, unless firmware provides the required information). The acpi_os_map_memory() arch backend implementation determines the mapping attributes. On arm64, if the BERT error region is not present in the EFI memory map, the error region is mapped as device-nGnRnE; this triggers alignment faults since memcpy unaligned accesses are not allowed in device-nGnRnE regions. The ACPI sysfs code cannot therefore map by default the BERT error region with memory semantics but should use a safer default. Change the sysfs code to map the BERT error region as MMIO (through acpi_os_map_iomem()) and use the memcpy_fromio() interface to read the error region into the kernel buffer. Link: https://lore.kernel.org/linux-arm-kernel/31ffe8fc-f5ee-2858-26c5-0fd8bdd68702@arm.com Link: https://lore.kernel.org/linux-acpi/CAJZ5v0g+OVbhuUUDrLUCfX_mVqY_e8ubgLTU98=jfjTeb4t+Pw@mail.gmail.com Signed-off-by: Lorenzo Pieralisi Tested-by: Veronika Kabatova Tested-by: Aristeu Rozanski Acked-by: Ard Biesheuvel Signed-off-by: Rafael J. Wysocki Cc: dann frazier Signed-off-by: Greg Kroah-Hartman

random: check for signals after page of pool writes

2022-05-30T07:24:09Z

commit 1ce6c8d68f8ac587f54d0a271ac594d3d51f3efb upstream. get_random_bytes_user() checks for signals after producing a PAGE_SIZE worth of output, just like /dev/zero does. write_pool() is doing basically the same work (actually, slightly more expensive), and so should stop to check for signals in the same way. Let's also name it write_pool_user() to match get_random_bytes_user(), so this won't be misused in the future. Before this patch, massive writes to /dev/urandom would tie up the process for an extremely long time and make it unterminatable. After, it can be successfully interrupted. The following test program can be used to see this works as intended: #include #include #include #include static unsigned char x[~0U]; static void handle(int) { } int main(int argc, char *argv[]) { pid_t pid = getpid(), child; int fd; signal(SIGUSR1, handle); if (!(child = fork())) { for (;;) kill(pid, SIGUSR1); } fd = open("/dev/urandom", O_WRONLY); pause(); printf("interrupted after writing %zd bytes\n", write(fd, x, sizeof(x))); close(fd); kill(child, SIGTERM); return 0; } Result before: "interrupted after writing 2147479552 bytes" Result after: "interrupted after writing 4096 bytes" Cc: Dominik Brodowski Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: wire up fops->splice_{read,write}_iter()

2022-05-30T07:24:09Z

commit 79025e727a846be6fd215ae9cdb654368ac3f9a6 upstream. Now that random/urandom is using {read,write}_iter, we can wire it up to using the generic splice handlers. Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: Jens Axboe [Jason: added the splice_write path. Note that sendfile() and such still does not work for read, though it does for write, because of a file type restriction in splice_direct_to_actor(), which I'll address separately.] Cc: Al Viro Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: convert to using fops->write_iter()

2022-05-30T07:24:09Z

commit 22b0a222af4df8ee9bb8e07013ab44da9511b047 upstream. Now that the read side has been converted to fix a regression with splice, convert the write side as well to have some symmetry in the interface used (and help deprecate ->write()). Signed-off-by: Jens Axboe [Jason: cleaned up random_ioctl a bit, require full writes in RNDADDENTROPY since it's crediting entropy, simplify control flow of write_pool(), and incorporate suggestions from Al.] Cc: Al Viro Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: convert to using fops->read_iter()

2022-05-30T07:24:09Z

commit 1b388e7765f2eaa137cf5d92b47ef5925ad83ced upstream. This is a pre-requisite to wiring up splice() again for the random and urandom drivers. It also allows us to remove the INT_MAX check in getrandom(), because import_single_range() applies capping internally. Signed-off-by: Jens Axboe [Jason: rewrote get_random_bytes_user() to simplify and also incorporate additional suggestions from Al.] Cc: Al Viro Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: unify batched entropy implementations

2022-05-30T07:24:08Z

commit 3092adcef3ffd2ef59634998297ca8358461ebce upstream. There are currently two separate batched entropy implementations, for u32 and u64, with nearly identical code, with the goal of avoiding unaligned memory accesses and letting the buffers be used more efficiently. Having to maintain these two functions independently is a bit of a hassle though, considering that they always need to be kept in sync. This commit factors them out into a type-generic macro, so that the expansion produces the same code as before, such that diffing the assembly shows no differences. This will also make it easier in the future to add u16 and u8 batches. This was initially tested using an always_inline function and letting gcc constant fold the type size in, but the code gen was less efficient, and in general it was more verbose and harder to follow. So this patch goes with the boring macro solution, similar to what's already done for the _wait functions in random.h. Cc: Dominik Brodowski Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: move randomize_page() into mm where it belongs

2022-05-30T07:24:08Z

commit 5ad7dd882e45d7fe432c32e896e2aaa0b21746ea upstream. randomize_page is an mm function. It is documented like one. It contains the history of one. It has the naming convention of one. It looks just like another very similar function in mm, randomize_stack_top(). And it has always been maintained and updated by mm people. There is no need for it to be in random.c. In the "which shape does not look like the other ones" test, pointing to randomize_page() is correct. So move randomize_page() into mm/util.c, right next to the similar randomize_stack_top() function. This commit contains no actual code changes. Cc: Andrew Morton Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

random: move initialization functions out of hot pages

2022-05-30T07:24:08Z

commit 560181c27b582557d633ecb608110075433383af upstream. Much of random.c is devoted to initializing the rng and accounting for when a sufficient amount of entropy has been added. In a perfect world, this would all happen during init, and so we could mark these functions as __init. But in reality, this isn't the case: sometimes the rng only finishes initializing some seconds after system init is finished. For this reason, at the moment, a whole host of functions that are only used relatively close to system init and then never again are intermixed with functions that are used in hot code all the time. This creates more cache misses than necessary. In order to pack the hot code closer together, this commit moves the initialization functions that can't be marked as __init into .text.unlikely by way of the __cold attribute. Of particular note is moving credit_init_bits() into a macro wrapper that inlines the crng_ready() static branch check. This avoids a function call to a nop+ret, and most notably prevents extra entropy arithmetic from being computed in mix_interrupt_randomness(). Reviewed-by: Dominik Brodowski Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman