user/sven/linux.git, branch v5.4.117

Linux 5.4.117

2021-05-07T08:51:38Z

Tested-by: Jon Hunter Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Jason Self Tested-by: Hulk Robot Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Link: https://lore.kernel.org/r/20210505112324.729798712@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

vfio: Depend on MMU

2021-05-07T08:51:38Z

commit b2b12db53507bc97d96f6b7cb279e831e5eafb00 upstream. VFIO_IOMMU_TYPE1 does not compile with !MMU: ../drivers/vfio/vfio_iommu_type1.c: In function 'follow_fault_pfn': ../drivers/vfio/vfio_iommu_type1.c:536:22: error: implicit declaration of function 'pte_write'; did you mean 'vfs_write'? [-Werror=implicit-function-declaration] So require it. Suggested-by: Cornelia Huck Signed-off-by: Jason Gunthorpe Message-Id: <0-v1-02cb5500df6e+78-vfio_no_mmu_jgg@nvidia.com> Signed-off-by: Alex Williamson Signed-off-by: Greg Kroah-Hartman

perf/core: Fix unconditional security_locked_down() call

2021-05-07T08:51:38Z

commit 08ef1af4de5fe7de9c6d69f1e22e51b66e385d9b upstream. Currently, the lockdown state is queried unconditionally, even though its result is used only if the PERF_SAMPLE_REGS_INTR bit is set in attr.sample_type. While that doesn't matter in case of the Lockdown LSM, it causes trouble with the SELinux's lockdown hook implementation. SELinux implements the locked_down hook with a check whether the current task's type has the corresponding "lockdown" class permission ("integrity" or "confidentiality") allowed in the policy. This means that calling the hook when the access control decision would be ignored generates a bogus permission check and audit record. Fix this by checking sample_type first and only calling the hook when its result would be honored. Fixes: b0c8fdc7fdb7 ("lockdown: Lock down perf when in confidentiality mode") Signed-off-by: Ondrej Mosnacek Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Paul Moore Link: https://lkml.kernel.org/r/20210224215628.192519-1-omosnace@redhat.com Signed-off-by: Greg Kroah-Hartman

ovl: allow upperdir inside lowerdir

2021-05-07T08:51:38Z

commit 708fa01597fa002599756bf56a96d0de1677375c upstream. Commit 146d62e5a586 ("ovl: detect overlapping layers") made sure we don't have overlapping layers, but it also broke the arguably valid use case of mount -olowerdir=/,upperdir=/subdir,.. where upperdir overlaps lowerdir on the same filesystem. This has been causing regressions. Revert the check, but only for the specific case where upperdir and/or workdir are subdirectories of lowerdir. Any other overlap (e.g. lowerdir is subdirectory of upperdir, etc) case is crazy, so leave the check in place for those. Overlaps are detected at lookup time too, so reverting the mount time check should be safe. Fixes: 146d62e5a586 ("ovl: detect overlapping layers") Cc: # v5.2 Signed-off-by: Miklos Szeredi Signed-off-by: Greg Kroah-Hartman

scsi: ufs: Unlock on a couple error paths

2021-05-07T08:51:38Z

commit bb14dd1564c90d333f51e69dd6fc880b8233ce11 upstream. We introduced a few new error paths, but we can't return directly, we first have to unlock "hba->clk_scaling_lock" first. Fixes: a276c19e3e98 ("scsi: ufs: Avoid busy-waiting by eliminating tag conflicts") Link: https://lore.kernel.org/r/20191213104828.7i64cpoof26rc4fw@kili.mountain Reviewed-by: Bart Van Assche Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

platform/x86: thinkpad_acpi: Correct thermal sensor allocation

2021-05-07T08:51:38Z

commit 6759e18e5cd8745a5dfc5726e4a3db5281ec1639 upstream. On recent Thinkpad platforms it was reported that temp sensor 11 was always incorrectly displaying 66C. It turns out the reason for this is that this location in EC RAM is not a temperature sensor but is the power supply ID (offset 0xC2). Based on feedback from the Lenovo firmware team the EC RAM version can be determined and for the current version (3) only the 0x78 to 0x7F range is used for temp sensors. I don't have any details for earlier versions so I have left the implementation unaltered there. Note - in this block only 0x78 and 0x79 are officially designated (CPU & GPU sensors). The use of the other locations in the block will vary from platform to platform; but the existing logic to detect a sensor presence holds. Signed-off-by: Mark Pearson Link: https://lore.kernel.org/r/20210407212015.298222-1-markpearson@lenovo.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

USB: Add reset-resume quirk for WD19's Realtek Hub

2021-05-07T08:51:38Z

commit ca91fd8c7643d93bfc18a6fec1a0d3972a46a18a upstream. Realtek Hub (0bda:5487) in Dell Dock WD19 sometimes fails to work after the system resumes from suspend with remote wakeup enabled device connected: [ 1947.640907] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641208] usb 5-2.3-port5: cannot disable (err = -71) [ 1947.641401] hub 5-2.3:1.0: hub_ext_port_status failed (err = -71) [ 1947.641450] usb 5-2.3-port4: cannot reset (err = -71) Information of this hub: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 5 D: Ver= 2.10 Cls=09(hub ) Sub=00 Prot=02 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=5487 Rev= 1.47 S: Manufacturer=Dell Inc. S: Product=Dell dock C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=01 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms I:* If#= 0 Alt= 1 #EPs= 1 Cls=09(hub ) Sub=00 Prot=02 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms The failure results from the ETIMEDOUT by chance when turning on the suspend feature for the specified port of the hub. The port seems to be in an unknown state so the hub_activate during resume fails the hub_port_status, then the hub will fail to work. The quirky hub needs the reset-resume quirk to function correctly. Acked-by: Alan Stern Signed-off-by: Chris Chiu Cc: stable Link: https://lore.kernel.org/r/20210420174651.6202-1-chris.chiu@canonical.com Signed-off-by: Greg Kroah-Hartman

USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet

2021-05-07T08:51:38Z

commit 8f23fe35ff1e5491b4d279323a8209a31f03ae65 upstream. This is another branded 8153 device that doesn't work well with LPM enabled: [ 400.597506] r8152 5-1.1:1.0 enx482ae3a2a6f0: Tx status -71 So disable LPM to resolve the issue. Signed-off-by: Kai-Heng Feng BugLink: https://bugs.launchpad.net/bugs/1922651 Link: https://lore.kernel.org/r/20210412135455.791971-1-kai.heng.feng@canonical.com Cc: stable Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX

2021-05-07T08:51:37Z

commit 64f40f9be14106e7df0098c427cb60be645bddb7 upstream. ToneLab EX guitar pedal device requires the same quirk like ToneLab ST for supporting the MIDI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212593 Cc: Link: https://lore.kernel.org/r/20210407144549.1530-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

perf ftrace: Fix access to pid in array when setting a pid filter

2021-05-07T08:51:37Z

[ Upstream commit 671b60cb6a897a5b3832fe57657152f2c3995e25 ] Command 'perf ftrace -v -- ls' fails in s390 (at least 5.12.0rc6). The root cause is a missing pointer dereference which causes an array element address to be used as PID. Fix this by extracting the PID. Output before: # ./perf ftrace -v -- ls function_graph tracer is used write '-263732416' to tracing/set_ftrace_pid failed: Invalid argument failed to set ftrace pid # Output after: ./perf ftrace -v -- ls function_graph tracer is used # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 4) | rcu_read_lock_sched_held() { 4) 0.552 us | rcu_lockdep_current_cpu_online(); 4) 6.124 us | } Reported-by: Alexander Schmidt Signed-off-by: Thomas Richter Acked-by: Namhyung Kim Cc: Heiko Carstens Cc: Sumanth Korikkar Cc: Sven Schnelle Cc: Vasily Gorbik Link: http://lore.kernel.org/lkml/20210421120400.2126433-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin