user/sven/linux.git, branch v5.4.140

Linux 5.4.140

2021-08-12T11:21:05Z

Link: https://lore.kernel.org/r/20210810172948.192298392@linuxfoundation.org Tested-by: Hulk Robot Tested-by: Sudip Mukherjee Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Tested-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

arm64: fix compat syscall return truncation

2021-08-12T11:21:05Z

commit e30e8d46cf605d216a799a28c77b8a41c328613a upstream. Due to inconsistencies in the way we manipulate compat GPRs, we have a few issues today: * For audit and tracing, where error codes are handled as a (native) long, negative error codes are expected to be sign-extended to the native 64-bits, or they may fail to be matched correctly. Thus a syscall which fails with an error may erroneously be identified as failing. * For ptrace, *all* compat return values should be sign-extended for consistency with 32-bit arm, but we currently only do this for negative return codes. * As we may transiently set the upper 32 bits of some compat GPRs while in the kernel, these can be sampled by perf, which is somewhat confusing. This means that where a syscall returns a pointer above 2G, this will be sign-extended, but will not be mistaken for an error as error codes are constrained to the inclusive range [-4096, -1] where no user pointer can exist. To fix all of these, we must consistently use helpers to get/set the compat GPRs, ensuring that we never write the upper 32 bits of the return code, and always sign-extend when reading the return code. This patch does so, with the following changes: * We re-organise syscall_get_return_value() to always sign-extend for compat tasks, and reimplement syscall_get_error() atop. We update syscall_trace_exit() to use syscall_get_return_value(). * We consistently use syscall_set_return_value() to set the return value, ensureing the upper 32 bits are never set unexpectedly. * As the core audit code currently uses regs_return_value() rather than syscall_get_return_value(), we special-case this for compat_user_mode(regs) such that this will do the right thing. Going forward, we should try to move the core audit code over to syscall_get_return_value(). Cc: Reported-by: He Zhe Reported-by: weiyuchen Cc: Catalin Marinas Cc: Will Deacon Reviewed-by: Catalin Marinas Link: https://lore.kernel.org/r/20210802104200.21390-1-mark.rutland@arm.com Signed-off-by: Will Deacon [Mark: trivial conflict resolution for v5.4.y] Signed-off-by: Mark Rutland Signed-off-by: Greg Kroah-Hartman

net/qla3xxx: fix schedule while atomic in ql_wait_for_drvr_lock and ql_adapter_reset

2021-08-12T11:21:05Z

[ Upstream commit 92766c4628ea349c8ddab0cd7bd0488f36e5c4ce ] When calling the 'ql_wait_for_drvr_lock' and 'ql_adapter_reset', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. Reported-by: Letu Ren Signed-off-by: Letu Ren Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

alpha: Send stop IPI to send to online CPUs

2021-08-12T11:21:05Z

[ Upstream commit caace6ca4e06f09413fb8f8a63319594cfb7d47d ] This issue was noticed while debugging a shutdown issue where some secondary CPUs are not being shutdown correctly. A fix for that [1] requires that secondary cpus be offlined using the cpu_online_mask so that the stop operation is a no-op if CPU HOTPLUG is disabled. I, like the author in [1] looked at the architectures and found that alpha is one of two architectures that executes smp_send_stop() on all possible CPUs. On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs to send them to online CPUs. Send the stop IPI to only the online CPUs. [1] https://lkml.org/lkml/2020/1/10/250 Signed-off-by: Prarit Bhargava Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Matt Turner Signed-off-by: Sasha Levin

virt_wifi: fix error on connect

2021-08-12T11:21:05Z

[ Upstream commit 17109e9783799be2a063b2bd861a508194b0a487 ] When connecting without first doing a scan, the BSS list is empty and __cfg80211_connect_result() generates this warning: $ iw dev wlan0 connect -w VirtWifi [ 15.371989] ------------[ cut here ]------------ [ 15.372179] WARNING: CPU: 0 PID: 92 at net/wireless/sme.c:756 __cfg80211_connect_result+0x402/0x440 [ 15.372383] CPU: 0 PID: 92 Comm: kworker/u2:2 Not tainted 5.13.0-kvm #444 [ 15.372512] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-3.fc34 04/01/2014 [ 15.372597] Workqueue: cfg80211 cfg80211_event_work [ 15.372756] RIP: 0010:__cfg80211_connect_result+0x402/0x440 [ 15.372818] Code: 48 2b 04 25 28 00 00 00 75 59 48 8b 3b 48 8b 76 10 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d 49 8d 65 f0 41 5d e9 d0 d4 fd ff 0f 0b <0f> 0b e9 f6 fd ff ff e8 f2 4a b4 ff e9 ec fd ff ff 0f 0b e9 19 fd [ 15.372966] RSP: 0018:ffffc900005cbdc0 EFLAGS: 00010246 [ 15.373022] RAX: 0000000000000000 RBX: ffff8880028e2400 RCX: ffff8880028e2472 [ 15.373088] RDX: 0000000000000002 RSI: 00000000fffffe01 RDI: ffffffff815335ba [ 15.373149] RBP: ffffc900005cbe00 R08: 0000000000000008 R09: ffff888002bdf8b8 [ 15.373209] R10: ffff88803ec208f0 R11: ffffffffffffe9ae R12: ffff88801d687d98 [ 15.373280] R13: ffff88801b5fe000 R14: ffffc900005cbdc0 R15: dead000000000100 [ 15.373330] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 15.373382] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.373425] CR2: 000056421c468958 CR3: 000000001b458001 CR4: 0000000000170eb0 [ 15.373478] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 15.373529] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 15.373580] Call Trace: [ 15.373611] ? cfg80211_process_wdev_events+0x10e/0x170 [ 15.373743] cfg80211_process_wdev_events+0x10e/0x170 [ 15.373783] cfg80211_process_rdev_events+0x21/0x40 [ 15.373846] cfg80211_event_work+0x20/0x30 [ 15.373892] process_one_work+0x1e9/0x340 [ 15.373956] worker_thread+0x4b/0x3f0 [ 15.374017] ? process_one_work+0x340/0x340 [ 15.374053] kthread+0x11f/0x140 [ 15.374089] ? set_kthread_struct+0x30/0x30 [ 15.374153] ret_from_fork+0x1f/0x30 [ 15.374187] ---[ end trace 321ef0cb7e9c0be1 ]--- wlan0 (phy #0): connected to 00:00:00:00:00:00 Add the fake bss just before the connect so that cfg80211_get_bss() finds the virtual network. As some code was duplicated, move it in a common function. Signed-off-by: Matteo Croce Link: https://lore.kernel.org/r/20210706154423.11065-1-mcroce@linux.microsoft.com Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

reiserfs: check directory items on read from disk

2021-08-12T11:21:05Z

[ Upstream commit 13d257503c0930010ef9eed78b689cec417ab741 ] While verifying the leaf item that we read from the disk, reiserfs doesn't check the directory items, this could cause a crash when we read a directory item from the disk that has an invalid deh_location. This patch adds a check to the directory items read from the disk that does a bounds check on deh_location for the directory entries. Any directory entry header with a directory entry offset greater than the item length is considered invalid. Link: https://lore.kernel.org/r/20210709152929.766363-1-chouhan.shreyansh630@gmail.com Reported-by: syzbot+c31a48e6702ccb3d64c9@syzkaller.appspotmail.com Signed-off-by: Shreyansh Chouhan Signed-off-by: Jan Kara Signed-off-by: Sasha Levin

reiserfs: add check for root_inode in reiserfs_fill_super

2021-08-12T11:21:04Z

[ Upstream commit 2acf15b94d5b8ea8392c4b6753a6ffac3135cd78 ] Our syzcaller report a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 116e95067 P4D 116e95067 PUD 1080b5067 PMD 0 Oops: 0010 [#1] SMP KASAN CPU: 7 PID: 592 Comm: a.out Not tainted 5.13.0-next-20210629-dirty #67 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-p4 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888114e779b8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 1ffff110229cef39 RCX: ffffffffaa67e1aa RDX: 0000000000000000 RSI: ffff88810a58ee00 RDI: ffff8881233180b0 RBP: ffffffffac38e9c0 R08: ffffffffaa67e17e R09: 0000000000000001 R10: ffffffffb91c5557 R11: fffffbfff7238aaa R12: ffff88810a58ee00 R13: ffff888114e77aa0 R14: 0000000000000000 R15: ffff8881233180b0 FS: 00007f946163c480(0000) GS:ffff88839f1c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000001099c1000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __lookup_slow+0x116/0x2d0 ? page_put_link+0x120/0x120 ? __d_lookup+0xfc/0x320 ? d_lookup+0x49/0x90 lookup_one_len+0x13c/0x170 ? __lookup_slow+0x2d0/0x2d0 ? reiserfs_schedule_old_flush+0x31/0x130 reiserfs_lookup_privroot+0x64/0x150 reiserfs_fill_super+0x158c/0x1b90 ? finish_unfinished+0xb10/0xb10 ? bprintf+0xe0/0xe0 ? __mutex_lock_slowpath+0x30/0x30 ? __kasan_check_write+0x20/0x30 ? up_write+0x51/0xb0 ? set_blocksize+0x9f/0x1f0 mount_bdev+0x27c/0x2d0 ? finish_unfinished+0xb10/0xb10 ? reiserfs_kill_sb+0x120/0x120 get_super_block+0x19/0x30 legacy_get_tree+0x76/0xf0 vfs_get_tree+0x49/0x160 ? capable+0x1d/0x30 path_mount+0xacc/0x1380 ? putname+0x97/0xd0 ? finish_automount+0x450/0x450 ? kmem_cache_free+0xf8/0x5a0 ? putname+0x97/0xd0 do_mount+0xe2/0x110 ? path_mount+0x1380/0x1380 ? copy_mount_options+0x69/0x140 __x64_sys_mount+0xf0/0x190 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae This is because 'root_inode' is initialized with wrong mode, and it's i_op is set to 'reiserfs_special_inode_operations'. Thus add check for 'root_inode' to fix the problem. Link: https://lore.kernel.org/r/20210702040743.1918552-1-yukuai3@huawei.com Signed-off-by: Yu Kuai Signed-off-by: Jan Kara Signed-off-by: Sasha Levin

libata: fix ata_pio_sector for CONFIG_HIGHMEM

2021-08-12T11:21:04Z

[ Upstream commit ecef6a9effe49e8e2635c839020b9833b71e934c ] Data transfers are not required to be block aligned in memory, so they span two pages. Fix this by splitting the call to >sff_data_xfer into two for that case. This has been broken since the initial libata import before the damn of git, but was uncovered by the legacy ide driver removal. Reported-by: kernel test robot Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

bpf, selftests: Adjust few selftest result_unpriv outcomes

2021-08-12T11:21:04Z

commit 1bad6fd52be4ce12d207e2820ceb0f29ab31fc53 upstream. Given we don't need to simulate the speculative domain for registers with immediates anymore since the verifier uses direct imm-based rewrites instead of having to mask, we can also lift a few cases that were previously rejected. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov [OP: backport to 5.4, small context adjustment in stack_ptr.c] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman

perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest

2021-08-12T11:21:04Z

commit df51fe7ea1c1c2c3bfdb81279712fdd2e4ea6c27 upstream. If we use "perf record" in an AMD Milan guest, dmesg reports a #GP warning from an unchecked MSR access error on MSR_F15H_PERF_CTLx: [] unchecked MSR access error: WRMSR to 0xc0010200 (tried to write 0x0000020000110076) at rIP: 0xffffffff8106ddb4 (native_write_msr+0x4/0x20) [] Call Trace: [] amd_pmu_disable_event+0x22/0x90 [] x86_pmu_stop+0x4c/0xa0 [] x86_pmu_del+0x3a/0x140 The AMD64_EVENTSEL_HOSTONLY bit is defined and used on the host, while the guest perf driver should avoid such use. Fixes: 1018faa6cf23 ("perf/x86/kvm: Fix Host-Only/Guest-Only counting with SVM disabled") Signed-off-by: Like Xu Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Liam Merwick Tested-by: Kim Phillips Tested-by: Liam Merwick Link: https://lkml.kernel.org/r/20210802070850.35295-1-likexu@tencent.com Signed-off-by: Greg Kroah-Hartman