user/sven/linux.git, branch v5.4.238

Linux 5.4.238

2023-03-22T12:28:10Z

Link: https://lore.kernel.org/r/20230320145430.861072439@linuxfoundation.org Tested-by: Chris Paterson (CIP) Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Tested-by: Shuah Khan Tested-by: Harshit Mogalapalli Tested-by: Jon Hunter Link: https://lore.kernel.org/r/20230321080647.018123628@linuxfoundation.org Tested-by: Linux Kernel Functional Testing Tested-by: Florian Fainelli Tested-by: Slade Watkins Tested-by: Guenter Roeck Tested-by: Chris Paterson (CIP) Signed-off-by: Greg Kroah-Hartman

HID: uhid: Over-ride the default maximum data buffer value with our own

2023-03-22T12:28:10Z

commit 1c5d4221240a233df2440fe75c881465cdf8da07 upstream. The default maximum data buffer size for this interface is UHID_DATA_MAX (4k). When data buffers are being processed, ensure this value is used when ensuring the sanity, rather than a value between the user provided value and HID_MAX_BUFFER_SIZE (16k). Signed-off-by: Lee Jones Signed-off-by: Jiri Kosina Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

HID: core: Provide new max_buffer_size attribute to over-ride the default

2023-03-22T12:28:10Z

commit b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream. Presently, when a report is processed, its proposed size, provided by the user of the API (as Report Size * Report Count) is compared against the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some low-level HID drivers allocate a reduced amount of memory to their buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending this check inadequate in some cases. In these circumstances, if the received report ends up being smaller than the proposed report size, the remainder of the buffer is zeroed. That is, the space between sizeof(csize) (size of the current report) and the rsize (size proposed i.e. Report Size * Report Count), which can be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset() shoots straight past the end of the buffer boundary and starts zeroing out in-use values, often resulting in calamity. This patch introduces a new variable into 'struct hid_ll_driver' where individual low-level drivers can over-ride the default maximum value of HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the interface. Signed-off-by: Lee Jones Signed-off-by: Jiri Kosina [Lee: Backported to v5.10.y] Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

PCI: Unify delay handling for reset and resume

2023-03-22T12:28:09Z

commit ac91e6980563ed53afadd925fa6585ffd2bc4a2c upstream. Sheng Bi reports that pci_bridge_secondary_bus_reset() may fail to wait for devices on the secondary bus to become accessible after reset: Although it does call pci_dev_wait(), it erroneously passes the bridge's pci_dev rather than that of a child. The bridge of course is always accessible while its secondary bus is reset, so pci_dev_wait() returns immediately. Sheng Bi proposes introducing a new pci_bridge_secondary_bus_wait() function which is called from pci_bridge_secondary_bus_reset(): https://lore.kernel.org/linux-pci/20220523171517.32407-1-windy.bi.enflame@gmail.com/ However we already have pci_bridge_wait_for_secondary_bus() which does almost exactly what we need. So far it's only called on resume from D3cold (which implies a Fundamental Reset per PCIe r6.0 sec 5.8). Re-using it for Secondary Bus Resets is a leaner and more rational approach than introducing a new function. That only requires a few minor tweaks: - Amend pci_bridge_wait_for_secondary_bus() to await accessibility of the first device on the secondary bus by calling pci_dev_wait() after performing the prescribed delays. pci_dev_wait() needs two parameters, a reset reason and a timeout, which callers must now pass to pci_bridge_wait_for_secondary_bus(). The timeout is 1 sec for resume (PCIe r6.0 sec 6.6.1) and 60 sec for reset (commit 821cdad5c46c ("PCI: Wait up to 60 seconds for device to become ready after FLR")). Introduce a PCI_RESET_WAIT macro for the 1 sec timeout. - Amend pci_bridge_wait_for_secondary_bus() to return 0 on success or -ENOTTY on error for consumption by pci_bridge_secondary_bus_reset(). - Drop an unnecessary 1 sec delay from pci_reset_secondary_bus() which is now performed by pci_bridge_wait_for_secondary_bus(). A static delay this long is only necessary for Conventional PCI, so modern PCIe systems benefit from shorter reset times as a side effect. Fixes: 6b2f1351af56 ("PCI: Wait for device to become ready after secondary bus reset") Link: https://lore.kernel.org/r/da77c92796b99ec568bd070cbe4725074a117038.1673769517.git.lukas@wunner.de Reported-by: Sheng Bi Tested-by: Ravi Kishore Koppuravuri Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg Reviewed-by: Kuppuswamy Sathyanarayanan Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Greg Kroah-Hartman

s390/ipl: add missing intersection check to ipl_report handling

2023-03-22T12:28:09Z

commit a52e5cdbe8016d4e3e6322fd93d71afddb9a5af9 upstream. The code which handles the ipl report is searching for a free location in memory where it could copy the component and certificate entries to. It checks for intersection between the sections required for the kernel and the component/certificate data area, but fails to check whether the data structures linking these data areas together intersect. This might cause the iplreport copy code to overwrite the iplreport itself. Fix this by adding two addtional intersection checks. Cc: Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot") Signed-off-by: Sven Schnelle Reviewed-by: Vasily Gorbik Signed-off-by: Vasily Gorbik Signed-off-by: Sven Schnelle Signed-off-by: Greg Kroah-Hartman

serial: 8250_em: Fix UART port type

2023-03-22T12:28:09Z

commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream. As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART IP found on EMMA mobile SoC is Register-compatible with the general-purpose 16750 UART chip. Fix UART port type as 16750 and enable 64-bytes fifo support. Fixes: 22886ee96895 ("serial8250-em: Emma Mobile UART driver V2") Cc: stable@vger.kernel.org Signed-off-by: Biju Das Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com [biju: manually fixed the conflicts] Signed-off-by: Biju Das Signed-off-by: Greg Kroah-Hartman

drm/i915: Don't use stolen memory for ring buffers with LLC

2023-03-22T12:28:09Z

commit 690e0ec8e63da9a29b39fedc6ed5da09c7c82651 upstream. Direction from hardware is that stolen memory should never be used for ring buffer allocations on platforms with LLC. There are too many caching pitfalls due to the way stolen memory accesses are routed. So it is safest to just not use it. Signed-off-by: John Harrison Fixes: c58b735fc762 ("drm/i915: Allocate rings from stolen") Cc: Chris Wilson Cc: Joonas Lahtinen Cc: Jani Nikula Cc: Rodrigo Vivi Cc: Tvrtko Ursulin Cc: intel-gfx@lists.freedesktop.org Cc: # v4.9+ Tested-by: Jouni Högander Reviewed-by: Daniele Ceraolo Spurio Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-2-John.C.Harrison@Intel.com (cherry picked from commit f54c1f6c697c4297f7ed94283c184acc338a5cf8) Signed-off-by: Jani Nikula Signed-off-by: John Harrison Signed-off-by: Greg Kroah-Hartman

x86/mm: Fix use of uninitialized buffer in sme_enable()

2023-03-22T12:28:09Z

commit cbebd68f59f03633469f3ecf9bea99cd6cce3854 upstream. cmdline_find_option() may fail before doing any initialization of the buffer array. This may lead to unpredictable results when the same buffer is used later in calls to strncmp() function. Fix the issue by returning early if cmdline_find_option() returns an error. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption") Signed-off-by: Nikita Zhandarovich Signed-off-by: Borislav Petkov (AMD) Acked-by: Tom Lendacky Cc: Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman

fbdev: stifb: Provide valid pixelclock and add fb_check_var() checks

2023-03-22T12:28:09Z

commit 203873a535d627c668f293be0cb73e26c30f9cc7 upstream. Find a valid modeline depending on the machine graphic card configuration and add the fb_check_var() function to validate Xorg provided graphics settings. Signed-off-by: Helge Deller Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

ftrace: Fix invalid address access in lookup_rec() when index is 0

2023-03-22T12:28:09Z

commit ee92fa443358f4fc0017c1d0d325c27b37802504 upstream. KASAN reported follow problem: BUG: KASAN: use-after-free in lookup_rec Read of size 8 at addr ffff000199270ff0 by task modprobe CPU: 2 Comm: modprobe Call trace: kasan_report __asan_load8 lookup_rec ftrace_location arch_check_ftrace_location check_kprobe_address_safe register_kprobe When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a pg which is newly added to ftrace_pages_start in ftrace_process_locs(). Before the first pg->index++, index is 0 and accessing pg->records[-1].ip will cause this problem. Don't check the ip when pg->index is 0. Link: https://lore.kernel.org/linux-trace-kernel/20230309080230.36064-1-chenzhongjin@huawei.com Cc: stable@vger.kernel.org Fixes: 9644302e3315 ("ftrace: Speed up search by skipping pages by address") Suggested-by: Steven Rostedt (Google) Signed-off-by: Chen Zhongjin Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman