user/sven/linux.git, branch v5.4.266

Linux 5.4.266

2024-01-08T10:29:48Z

Link: https://lore.kernel.org/r/20240105143815.541462991@linuxfoundation.org Tested-by: kernelci.org bot Tested-by: Harshit Mogalapalli Link: https://lore.kernel.org/r/20240106084016.200641776@linuxfoundation.org Tested-by: Linux Kernel Functional Testing Tested-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

block: Don't invalidate pagecache for invalid falloc modes

2024-01-08T10:29:48Z

commit 1364a3c391aedfeb32aa025303ead3d7c91cdf9d upstream. Only call truncate_bdev_range() if the fallocate mode is supported. This fixes a bug where data in the pagecache could be invalidated if the fallocate() was called on the block device with an invalid mode. Fixes: 25f4c41415e5 ("block: implement (some of) fallocate for block devices") Cc: stable@vger.kernel.org Reported-by: "Darrick J. Wong" Signed-off-by: Sarthak Kukreti Reviewed-by: Christoph Hellwig Reviewed-by: "Darrick J. Wong" Signed-off-by: Mike Snitzer Fixes: line? I've never seen those wrapped. Link: https://lore.kernel.org/r/20231011201230.750105-1-sarthakkukreti@chromium.org Signed-off-by: Jens Axboe Signed-off-by: Sarthak Kukreti Signed-off-by: Greg Kroah-Hartman

ring-buffer: Fix wake ups when buffer_percent is set to 100

2024-01-08T10:29:48Z

commit 623b1f896fa8a669a277ee5a258307a16c7377a3 upstream. The tracefs file "buffer_percent" is to allow user space to set a water-mark on how much of the tracing ring buffer needs to be filled in order to wake up a blocked reader. 0 - is to wait until any data is in the buffer 1 - is to wait for 1% of the sub buffers to be filled 50 - would be half of the sub buffers are filled with data 100 - is not to wake the waiter until the ring buffer is completely full Unfortunately the test for being full was: dirty = ring_buffer_nr_dirty_pages(buffer, cpu); return (dirty * 100) > (full * nr_pages); Where "full" is the value for "buffer_percent". There is two issues with the above when full == 100. 1. dirty * 100 > 100 * nr_pages will never be true That is, the above is basically saying that if the user sets buffer_percent to 100, more pages need to be dirty than exist in the ring buffer! 2. The page that the writer is on is never considered dirty, as dirty pages are only those that are full. When the writer goes to a new sub-buffer, it clears the contents of that sub-buffer. That is, even if the check was ">=" it would still not be equal as the most pages that can be considered "dirty" is nr_pages - 1. To fix this, add one to dirty and use ">=" in the compare. Link: https://lore.kernel.org/linux-trace-kernel/20231226125902.4a057f1d@gandalf.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland Cc: Mathieu Desnoyers Acked-by: Masami Hiramatsu (Google) Fixes: 03329f9939781 ("tracing: Add tracefs file buffer_percentage") Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

smb: client: fix OOB in smbCalcSize()

2024-01-08T10:29:47Z

[ Upstream commit b35858b3786ddbb56e1c35138ba25d6adf8d0bef ] Validate @smb->WordCount to avoid reading off the end of @smb and thus causing the following KASAN splat: BUG: KASAN: slab-out-of-bounds in smbCalcSize+0x32/0x40 [cifs] Read of size 2 at addr ffff88801c024ec5 by task cifsd/1328 CPU: 1 PID: 1328 Comm: cifsd Not tainted 6.7.0-rc5 #9 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? smbCalcSize+0x32/0x40 [cifs] ? smbCalcSize+0x32/0x40 [cifs] kasan_check_range+0x105/0x1b0 smbCalcSize+0x32/0x40 [cifs] checkSMB+0x162/0x370 [cifs] ? __pfx_checkSMB+0x10/0x10 [cifs] cifs_handle_standard+0xbc/0x2f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 cifs_demultiplex_thread+0xed1/0x1360 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? __pfx_lock_release+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? mark_held_locks+0x1a/0x90 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0xce/0xf0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x18d/0x1d0 ? kthread+0xdb/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 This fixes CVE-2023-6606. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218218 Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French Signed-off-by: Sasha Levin

usb: fotg210-hcd: delete an incorrect bounds test

2024-01-08T10:29:47Z

[ Upstream commit 7fbcd195e2b8cc952e4aeaeb50867b798040314c ] Here "temp" is the number of characters that we have written and "size" is the size of the buffer. The intent was clearly to say that if we have written to the end of the buffer then stop. However, for that to work the comparison should have been done on the original "size" value instead of the "size -= temp" value. Not only will that not trigger when we want to, but there is a small chance that it will trigger incorrectly before we want it to and we break from the loop slightly earlier than intended. This code was recently changed from using snprintf() to scnprintf(). With snprintf() we likely would have continued looping and passed a negative size parameter to snprintf(). This would have triggered an annoying WARN(). Now that we have converted to scnprintf() "size" will never drop below 1 and there is no real need for this test. We could change the condition to "if (temp <= 1) goto done;" but just deleting the test is cleanest. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Cc: stable Signed-off-by: Dan Carpenter Reviewed-by: Linus Walleij Reviewed-by: Lee Jones Link: https://lore.kernel.org/r/ZXmwIwHe35wGfgzu@suswa Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

x86/alternatives: Sync core before enabling interrupts

2024-01-08T10:29:47Z

commit 3ea1704a92967834bf0e64ca1205db4680d04048 upstream. text_poke_early() does: local_irq_save(flags); memcpy(addr, opcode, len); local_irq_restore(flags); sync_core(); That's not really correct because the synchronization should happen before interrupts are re-enabled to ensure that a pending interrupt observes the complete update of the opcodes. It's not entirely clear whether the interrupt entry provides enough serialization already, but moving the sync_core() invocation into interrupt disabled region does no harm and is obviously correct. Fixes: 6fffacb30349 ("x86/alternatives, jumplabel: Use text_poke_early() before mm_init()") Signed-off-by: Thomas Gleixner Signed-off-by: Borislav Petkov (AMD) Acked-by: Peter Zijlstra (Intel) Cc: Link: https://lore.kernel.org/r/ZT6narvE%2BLxX%2B7Be@windriver.com Signed-off-by: Greg Kroah-Hartman

net: rfkill: gpio: set GPIO direction

2024-01-08T10:29:47Z

commit 23484d817082c3005252d8edfc8292c8a1006b5b upstream. Fix the undefined usage of the GPIO consumer API after retrieving the GPIO description with GPIO_ASIS. The API documentation mentions that GPIO_ASIS won't set a GPIO direction and requires the user to set a direction before using the GPIO. This can be confirmed on i.MX6 hardware, where rfkill-gpio is no longer able to enabled/disable a device, presumably because the GPIO controller was never configured for the output direction. Fixes: b2f750c3a80b ("net: rfkill: gpio: prevent value glitch during probe") Cc: stable@vger.kernel.org Signed-off-by: Rouven Czerwinski Link: https://msgid.link/20231207075835.3091694-1-r.czerwinski@pengutronix.de Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

net: 9p: avoid freeing uninit memory in p9pdu_vreadf

2024-01-08T10:29:47Z

commit ff49bf1867578f23a5ffdd38f927f6e1e16796c4 upstream. If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails, the error path is not handled properly. *wnames or members of *wnames array may be left uninitialized and invalidly freed. Initialize *wnames to NULL in beginning of case 'T'. Initialize the first *wnames array element to NULL and nullify the failing *wnames element so that the error path freeing loop stops on the first NULL element and doesn't proceed further. Found by Linux Verification Center (linuxtesting.org). Fixes: ace51c4dd2f9 ("9p: add new protocol support code") Signed-off-by: Fedor Pchelkin Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru> Cc: stable@vger.kernel.org Reviewed-by: Simon Horman Reviewed-by: Christian Schoenebeck Signed-off-by: Dominique Martinet Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_event: Fix not checking if HCI_OP_INQUIRY has been sent

2024-01-08T10:29:47Z

commit 99e67d46e5ff3c7c901af6009edec72d3d363be8 upstream. Before setting HCI_INQUIRY bit check if HCI_OP_INQUIRY was really sent otherwise the controller maybe be generating invalid events or, more likely, it is a result of fuzzing tools attempting to test the right behavior of the stack when unexpected events are generated. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=218151 Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Quectel RM500Q R13 firmware support

2024-01-08T10:29:47Z

commit 06f22cd6635bdae7d73566fca9879b2026a08e00 upstream. Add support for Quectel RM500Q R13 firmware which uses Prot=40 for the NMEA port: T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 8 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 4.14 S: Manufacturer=Quectel S: Product=RM500Q-AE S: SerialNumber=xxxxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Reinhard Speyerer Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman