user/sven/linux.git, branch v5.4.61

Linux 5.4.61

2020-08-26T08:41:08Z

Tested-by: Jon Hunter Tested-by: Nathan Chancellor Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

KVM: arm64: Only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is not set

2020-08-26T08:41:08Z

commit b5331379bc62611d1026173a09c73573384201d9 upstream. When an MMU notifier call results in unmapping a range that spans multiple PGDs, we end up calling into cond_resched_lock() when crossing a PGD boundary, since this avoids running into RCU stalls during VM teardown. Unfortunately, if the VM is destroyed as a result of OOM, then blocking is not permitted and the call to the scheduler triggers the following BUG(): | BUG: sleeping function called from invalid context at arch/arm64/kvm/mmu.c:394 | in_atomic(): 1, irqs_disabled(): 0, non_block: 1, pid: 36, name: oom_reaper | INFO: lockdep is turned off. | CPU: 3 PID: 36 Comm: oom_reaper Not tainted 5.8.0 #1 | Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 | Call trace: | dump_backtrace+0x0/0x284 | show_stack+0x1c/0x28 | dump_stack+0xf0/0x1a4 | ___might_sleep+0x2bc/0x2cc | unmap_stage2_range+0x160/0x1ac | kvm_unmap_hva_range+0x1a0/0x1c8 | kvm_mmu_notifier_invalidate_range_start+0x8c/0xf8 | __mmu_notifier_invalidate_range_start+0x218/0x31c | mmu_notifier_invalidate_range_start_nonblock+0x78/0xb0 | __oom_reap_task_mm+0x128/0x268 | oom_reap_task+0xac/0x298 | oom_reaper+0x178/0x17c | kthread+0x1e4/0x1fc | ret_from_fork+0x10/0x30 Use the new 'flags' argument to kvm_unmap_hva_range() to ensure that we only reschedule if MMU_NOTIFIER_RANGE_BLOCKABLE is set in the notifier flags. Cc: Fixes: 8b3405e345b5 ("kvm: arm/arm64: Fix locking for kvm_free_stage2_pgd") Cc: Marc Zyngier Cc: Suzuki K Poulose Cc: James Morse Signed-off-by: Will Deacon Message-Id: <20200811102725.7121-3-will@kernel.org> Signed-off-by: Paolo Bonzini Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()

2020-08-26T08:41:08Z

commit fdfe7cbd58806522e799e2a50a15aee7f2cbb7b6 upstream. The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: Cc: Marc Zyngier Cc: Suzuki K Poulose Cc: James Morse Signed-off-by: Will Deacon Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

xen: don't reschedule in preemption off sections

2020-08-26T08:41:07Z

For support of long running hypercalls xen_maybe_preempt_hcall() is calling cond_resched() in case a hypercall marked as preemptible has been interrupted. Normally this is no problem, as only hypercalls done via some ioctl()s are marked to be preemptible. In rare cases when during such a preemptible hypercall an interrupt occurs and any softirq action is started from irq_exit(), a further hypercall issued by the softirq handler will be regarded to be preemptible, too. This might lead to rescheduling in spite of the softirq handler potentially having set preempt_disable(), leading to splats like: BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl INFO: lockdep is turned off. CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1 Call Trace: dump_stack+0x8f/0xd0 ___might_sleep.cold.76+0xb2/0x103 xen_maybe_preempt_hcall+0x48/0x70 xen_do_hypervisor_callback+0x37/0x40 RIP: e030:xen_hypercall_xen_version+0xa/0x20 Code: ... RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246 RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0 R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000 ? xen_hypercall_xen_version+0xa/0x20 ? xen_force_evtchn_callback+0x9/0x10 ? check_events+0x12/0x20 ? xen_restore_fl_direct+0x1f/0x20 ? _raw_spin_unlock_irqrestore+0x53/0x60 ? debug_dma_sync_single_for_cpu+0x91/0xc0 ? _raw_spin_unlock_irqrestore+0x53/0x60 ? xen_swiotlb_sync_single_for_cpu+0x3d/0x140 ? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en] ? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en] ? net_rx_action+0x151/0x4a0 ? __do_softirq+0xed/0x55b ? irq_exit+0xea/0x100 ? xen_evtchn_do_upcall+0x2c/0x40 ? xen_do_hypervisor_callback+0x29/0x40 ? xen_hypercall_domctl+0xa/0x20 ? xen_hypercall_domctl+0x8/0x20 ? privcmd_ioctl+0x221/0x990 [xen_privcmd] ? do_vfs_ioctl+0xa5/0x6f0 ? ksys_ioctl+0x60/0x90 ? trace_hardirqs_off_thunk+0x1a/0x20 ? __x64_sys_ioctl+0x16/0x20 ? do_syscall_64+0x62/0x250 ? entry_SYSCALL_64_after_hwframe+0x49/0xbe Fix that by testing preempt_count() before calling cond_resched(). In kernel 5.8 this can't happen any more due to the entry code rework (more than 100 patches, so not a candidate for backporting). The issue was introduced in kernel 4.3, so this patch should go into all stable kernels in [4.3 ... 5.7]. Reported-by: Sarah Newman Fixes: 0fa2f5cb2b0ecd8 ("sched/preempt, xen: Use need_resched() instead of should_resched()") Cc: Sarah Newman Cc: stable@vger.kernel.org Signed-off-by: Juergen Gross Tested-by: Chris Brannon Signed-off-by: Greg Kroah-Hartman

mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible

2020-08-26T08:41:07Z

commit 75802ca66354a39ab8e35822747cd08b3384a99a upstream. This is found by code observation only. Firstly, the worst case scenario should assume the whole range was covered by pmd sharing. The old algorithm might not work as expected for ranges like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the expected range should be (0, 2g). Since at it, remove the loop since it should not be required. With that, the new code should be faster too when the invalidating range is huge. Mike said: : With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only : adjust to (0, 1g+2m) which is incorrect. : : We should cc stable. The original reason for adjusting the range was to : prevent data corruption (getting wrong page). Since the range is not : always adjusted correctly, the potential for corruption still exists. : : However, I am fairly confident that adjust_range_if_pmd_sharing_possible : is only gong to be called in two cases: : : 1) for a single page : 2) for range == entire vma : : In those cases, the current code should produce the correct results. : : To be safe, let's just cc stable. Fixes: 017b1660df89 ("mm: migration: fix migration of huge PMD shared pages") Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Reviewed-by: Mike Kravetz Cc: Andrea Arcangeli Cc: Matthew Wilcox Cc: Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com Signed-off-by: Linus Torvalds Signed-off-by: Mike Kravetz Signed-off-by: Greg Kroah-Hartman

do_epoll_ctl(): clean the failure exits up a bit

2020-08-26T08:41:07Z

commit 52c479697c9b73f628140dcdfcd39ea302d05482 upstream. Signed-off-by: Al Viro Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

epoll: Keep a reference on files added to the check list

2020-08-26T08:41:07Z

commit a9ed4a6560b8562b7e2e2bed9527e88001f7b682 upstream. When adding a new fd to an epoll, and that this new fd is an epoll fd itself, we recursively scan the fds attached to it to detect cycles, and add non-epool files to a "check list" that gets subsequently parsed. However, this check list isn't completely safe when deletions can happen concurrently. To sidestep the issue, make sure that a struct file placed on the check list sees its f_count increased, ensuring that a concurrent deletion won't result in the file disapearing from under our feet. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Al Viro Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

efi: add missed destroy_workqueue when efisubsys_init fails

2020-08-26T08:41:07Z

commit 98086df8b70c06234a8f4290c46064e44dafa0ed upstream. destroy_workqueue() should be called to destroy efi_rts_wq when efisubsys_init() init resources fails. Cc: Reported-by: Hulk Robot Signed-off-by: Li Heng Link: https://lore.kernel.org/r/1595229738-10087-1-git-send-email-liheng40@huawei.com Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman

powerpc/pseries: Do not initiate shutdown when system is running on UPS

2020-08-26T08:41:06Z

commit 90a9b102eddf6a3f987d15f4454e26a2532c1c98 upstream. As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: Vasant Hegde [mpe: Massage change log and add PAPR references] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com Signed-off-by: Greg Kroah-Hartman

net: dsa: b53: check for timeout

2020-08-26T08:41:06Z

[ Upstream commit 774d977abfd024e6f73484544b9abe5a5cd62de7 ] clang static analysis reports this problem b53_common.c:1583:13: warning: The left expression of the compound assignment is an uninitialized value. The computed value will also be garbage ent.port &= ~BIT(port); ~~~~~~~~ ^ ent is set by a successful call to b53_arl_read(). Unsuccessful calls are caught by an switch statement handling specific returns. b32_arl_read() calls b53_arl_op_wait() which fails with the unhandled -ETIMEDOUT. So add -ETIMEDOUT to the switch statement. Because b53_arl_op_wait() already prints out a message, do not add another one. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Tom Rix Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin