user/sven/linux.git, branch v5.8.12

Linux 5.8.12

2020-09-26T16:05:28Z

Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Shuah Khan Tested-by: Jeffrin Jose T Tested-by: Guenter Roeck Link: https://lore.kernel.org/r/20200925124727.878494124@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Fix endianness when calculating pedit mask first bit

2020-09-26T16:05:28Z

[ Upstream commit 82198d8bcdeff01d19215d712aa55031e21bccbc ] The field mask value is provided in network byte order and has to be converted to host byte order before calculating pedit mask first bit. Fixes: 88f30bbcbaaa ("net/mlx5e: Bit sized fields rewrite support") Signed-off-by: Maor Dickman Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Use synchronize_rcu to sync with NAPI

2020-09-26T16:05:28Z

[ Upstream commit 9c25a22dfb00270372224721fed646965420323a ] As described in the previous commit, napi_synchronize doesn't quite fit the purpose when we just need to wait until the currently running NAPI quits. Its implementation waits until NAPI is not running by polling and waiting for 1ms in between. In cases where we need to deactivate one queue (e.g., recovery flows) or where we deactivate them one-by-one (deactivate channel flow), we may get stuck in napi_synchronize forever if other queues keep NAPI active, causing a soft lockup. Depending on kernel configuration (CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC), it may result in a kernel panic. To fix the issue, use synchronize_rcu to wait for NAPI to quit, and wrap the whole NAPI in rcu_read_lock. Fixes: acc6c5953af1 ("net/mlx5e: Split open/close channels to stages") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Use RCU to protect rq->xdp_prog

2020-09-26T16:05:28Z

[ Upstream commit fe45386a208277cae4648106133c08246eecd012 ] Currently, the RQs are temporarily deactivated while hot-replacing the XDP program, and napi_synchronize is used to make sure rq->xdp_prog is not in use. However, napi_synchronize is not ideal: instead of waiting till the end of a NAPI cycle, it polls and waits until NAPI is not running, sleeping for 1ms between the periodic checks. Under heavy workloads, this loop will never end, which may even lead to a kernel panic if the kernel detects the hangup. Such workloads include XSK TX and possibly also heavy RX (XSK or normal). The fix is inspired by commit 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"). As mlx5e_xdp_handle is already protected by rcu_read_lock, and bpf_prog_put uses call_rcu to free the program, there is no need for additional synchronization if proper RCU functions are used to access the pointer. This patch converts all accesses to rq->xdp_prog to use RCU functions. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

Revert "netns: don't disable BHs when locking "nsid_lock""

2020-09-26T16:05:28Z

[ Upstream commit e1f469cd5866499ac40bfdca87411e1c525a10c7 ] This reverts commit 8d7e5dee972f1cde2ba96c621f1541fa36e7d4f4. To protect netns id, the nsid_lock is used when netns id is being allocated and removed by peernet2id_alloc() and unhash_nsid(). The nsid_lock can be used in BH context but only spin_lock() is used in this code. Using spin_lock() instead of spin_lock_bh() can result in a deadlock in the following scenario reported by the lockdep. In order to avoid a deadlock, the spin_lock_bh() should be used instead of spin_lock() to acquire nsid_lock. Test commands: ip netns del nst ip netns add nst ip link add veth1 type veth peer name veth2 ip link set veth1 netns nst ip netns exec nst ip link add name br1 type bridge vlan_filtering 1 ip netns exec nst ip link set dev br1 up ip netns exec nst ip link set dev veth1 master br1 ip netns exec nst ip link set dev veth1 up ip netns exec nst ip link add macvlan0 link br1 up type macvlan Splat looks like: [ 33.615860][ T607] WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [ 33.617194][ T607] 5.9.0-rc1+ #665 Not tainted [ ... ] [ 33.670615][ T607] Chain exists of: [ 33.670615][ T607] &mc->mca_lock --> &bridge_netdev_addr_lock_key --> &net->nsid_lock [ 33.670615][ T607] [ 33.673118][ T607] Possible interrupt unsafe locking scenario: [ 33.673118][ T607] [ 33.674599][ T607] CPU0 CPU1 [ 33.675557][ T607] ---- ---- [ 33.676516][ T607] lock(&net->nsid_lock); [ 33.677306][ T607] local_irq_disable(); [ 33.678517][ T607] lock(&mc->mca_lock); [ 33.679725][ T607] lock(&bridge_netdev_addr_lock_key); [ 33.681166][ T607] [ 33.681791][ T607] lock(&mc->mca_lock); [ 33.682579][ T607] [ 33.682579][ T607] *** DEADLOCK *** [ ... ] [ 33.922046][ T607] stack backtrace: [ 33.922999][ T607] CPU: 3 PID: 607 Comm: ip Not tainted 5.9.0-rc1+ #665 [ 33.924099][ T607] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 33.925714][ T607] Call Trace: [ 33.926238][ T607] dump_stack+0x78/0xab [ 33.926905][ T607] check_irq_usage+0x70b/0x720 [ 33.927708][ T607] ? iterate_chain_key+0x60/0x60 [ 33.928507][ T607] ? check_path+0x22/0x40 [ 33.929201][ T607] ? check_noncircular+0xcf/0x180 [ 33.930024][ T607] ? __lock_acquire+0x1952/0x1f20 [ 33.930860][ T607] __lock_acquire+0x1952/0x1f20 [ 33.931667][ T607] lock_acquire+0xaf/0x3a0 [ 33.932366][ T607] ? peernet2id_alloc+0x3a/0x170 [ 33.933147][ T607] ? br_port_fill_attrs+0x54c/0x6b0 [bridge] [ 33.934140][ T607] ? br_port_fill_attrs+0x5de/0x6b0 [bridge] [ 33.935113][ T607] ? kvm_sched_clock_read+0x14/0x30 [ 33.935974][ T607] _raw_spin_lock+0x30/0x70 [ 33.936728][ T607] ? peernet2id_alloc+0x3a/0x170 [ 33.937523][ T607] peernet2id_alloc+0x3a/0x170 [ 33.938313][ T607] rtnl_fill_ifinfo+0xb5e/0x1400 [ 33.939091][ T607] rtmsg_ifinfo_build_skb+0x8a/0xf0 [ 33.939953][ T607] rtmsg_ifinfo_event.part.39+0x17/0x50 [ 33.940863][ T607] rtmsg_ifinfo+0x1f/0x30 [ 33.941571][ T607] __dev_notify_flags+0xa5/0xf0 [ 33.942376][ T607] ? __irq_work_queue_local+0x49/0x50 [ 33.943249][ T607] ? irq_work_queue+0x1d/0x30 [ 33.943993][ T607] ? __dev_set_promiscuity+0x7b/0x1a0 [ 33.944878][ T607] __dev_set_promiscuity+0x7b/0x1a0 [ 33.945758][ T607] dev_set_promiscuity+0x1e/0x50 [ 33.946582][ T607] br_port_set_promisc+0x1f/0x40 [bridge] [ 33.947487][ T607] br_manage_promisc+0x8b/0xe0 [bridge] [ 33.948388][ T607] __dev_set_promiscuity+0x123/0x1a0 [ 33.949244][ T607] __dev_set_rx_mode+0x68/0x90 [ 33.950021][ T607] dev_uc_add+0x50/0x60 [ 33.950720][ T607] macvlan_open+0x18e/0x1f0 [macvlan] [ 33.951601][ T607] __dev_open+0xd6/0x170 [ 33.952269][ T607] __dev_change_flags+0x181/0x1d0 [ 33.953056][ T607] rtnl_configure_link+0x2f/0xa0 [ 33.953884][ T607] __rtnl_newlink+0x6b9/0x8e0 [ 33.954665][ T607] ? __lock_acquire+0x95d/0x1f20 [ 33.955450][ T607] ? lock_acquire+0xaf/0x3a0 [ 33.956193][ T607] ? is_bpf_text_address+0x5/0xe0 [ 33.956999][ T607] rtnl_newlink+0x47/0x70 Acked-by: Guillaume Nault Fixes: 8d7e5dee972f ("netns: don't disable BHs when locking "nsid_lock"") Reported-by: syzbot+3f960c64a104eaa2c813@syzkaller.appspotmail.com Signed-off-by: Taehee Yoo Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: macb: fix for pause frame receive enable bit

2020-09-26T16:05:28Z

[ Upstream commit d7739b0b6d15ef9ad5c79424736b8ded5ed3e913 ] PAE bit of NCFGR register, when set, pauses transmission if a non-zero 802.3 classic pause frame is received. Fixes: 7897b071ac3b ("net: macb: convert to phylink") Signed-off-by: Parshuram Thombare Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: dsa: microchip: ksz8795: really set the correct number of ports

2020-09-26T16:05:28Z

[ Upstream commit fd944dc24336922656a48f4608bfb41abdcdc4aa ] The KSZ9477 and KSZ8795 use the port_cnt field differently: For the KSZ9477, it includes the CPU port(s), while for the KSZ8795, it doesn't. It would be a good cleanup to make the handling of both drivers match, but as a first step, fix the recently broken assignment of num_ports in the KSZ8795 driver (which completely broke probing, as the CPU port index was always failing the num_ports check). Fixes: af199a1a9cb0 ("net: dsa: microchip: set the correct number of ports") Signed-off-by: Matthias Schiffer Reviewed-by: Codrin Ciubotariu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: dsa: link interfaces with the DSA master to get rid of lockdep warnings

2020-09-26T16:05:27Z

[ Upstream commit 2f1e8ea726e9020e01e9e2ae29c2d5eb11133032 ] Since commit 845e0ebb4408 ("net: change addr_list_lock back to static key"), cascaded DSA setups (DSA switch port as DSA master for another DSA switch port) are emitting this lockdep warning: ============================================ WARNING: possible recursive locking detected 5.8.0-rc1-00133-g923e4b5032dd-dirty #208 Not tainted -------------------------------------------- dhcpcd/323 is trying to acquire lock: ffff000066dd4268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 but task is already holding lock: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&dsa_master_addr_list_lock_key/1); lock(&dsa_master_addr_list_lock_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by dhcpcd/323: #0: ffffdbd1381dda18 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff00006614b268 (_xmit_ETHER){+...}-{2:2}, at: dev_set_rx_mode+0x28/0x48 #2: ffff00006608c268 (&dsa_master_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync+0x44/0x90 stack backtrace: Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x20/0x30 dump_stack+0xec/0x158 __lock_acquire+0xca0/0x2398 lock_acquire+0xe8/0x440 _raw_spin_lock_nested+0x64/0x90 dev_mc_sync+0x44/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_mc_sync+0x84/0x90 dsa_slave_set_rx_mode+0x34/0x50 __dev_set_rx_mode+0x60/0xa0 dev_set_rx_mode+0x30/0x48 __dev_open+0x10c/0x180 __dev_change_flags+0x170/0x1c8 dev_change_flags+0x2c/0x70 devinet_ioctl+0x774/0x878 inet_ioctl+0x348/0x3b0 sock_do_ioctl+0x50/0x310 sock_ioctl+0x1f8/0x580 ksys_ioctl+0xb0/0xf0 __arm64_sys_ioctl+0x28/0x38 el0_svc_common.constprop.0+0x7c/0x180 do_el0_svc+0x2c/0x98 el0_sync_handler+0x9c/0x1b8 el0_sync+0x158/0x180 Since DSA never made use of the netdev API for describing links between upper devices and lower devices, the dev->lower_level value of a DSA switch interface would be 1, which would warn when it is a DSA master. We can use netdev_upper_dev_link() to describe the relationship between a DSA slave and a DSA master. To be precise, a DSA "slave" (switch port) is an "upper" to a DSA "master" (host port). The relationship is "many uppers to one lower", like in the case of VLAN. So, for that reason, we use the same function as VLAN uses. There might be a chance that somebody will try to take hold of this interface and use it immediately after register_netdev() and before netdev_upper_dev_link(). To avoid that, we do the registration and linkage while holding the RTNL, and we use the RTNL-locked cousin of register_netdev(), which is register_netdevice(). Since this warning was not there when lockdep was using dynamic keys for addr_list_lock, we are blaming the lockdep patch itself. The network stack _has_ been using static lockdep keys before, and it _is_ likely that stacked DSA setups have been triggering these lockdep warnings since forever, however I can't test very old kernels on this particular stacked DSA setup, to ensure I'm not in fact introducing regressions. Fixes: 845e0ebb4408 ("net: change addr_list_lock back to static key") Suggested-by: Cong Wang Signed-off-by: Vladimir Oltean Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

hv_netvsc: Fix hibernation for mlx5 VF driver

2020-09-26T16:05:27Z

[ Upstream commit 19162fd4063a3211843b997a454b505edb81d5ce ] mlx5_suspend()/resume() keep the network interface, so during hibernation netvsc_unregister_vf() and netvsc_register_vf() are not called, and hence netvsc_resume() should call netvsc_vf_changed() to switch the data path back to the VF after hibernation. Note: after we close and re-open the vmbus channel of the netvsc NIC in netvsc_suspend() and netvsc_resume(), the data path is implicitly switched to the netvsc NIC. Similarly, netvsc_suspend() should not call netvsc_unregister_vf(), otherwise the VF can no longer be used after hibernation. For mlx4, since the VF network interafce is explicitly destroyed and re-created during hibernation (see mlx4_suspend()/resume()), hv_netvsc already explicitly switches the data path from and to the VF automatically via netvsc_register_vf() and netvsc_unregister_vf(), so mlx4 doesn't need this fix. Note: mlx4 can still work with the fix because in netvsc_suspend()/resume() ndev_ctx->vf_netdev is NULL for mlx4. Fixes: 0efeea5fb153 ("hv_netvsc: Add the support of hibernation") Signed-off-by: Dexuan Cui Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

hinic: fix rewaking txq after netif_tx_disable

2020-09-26T16:05:27Z

[ Upstream commit a1b80e0143a1b878f8e21d82fd55f3f46f0014be ] When calling hinic_close in hinic_set_channels, all queues are stopped after netif_tx_disable, but some queue may be rewaken in free_tx_poll by mistake while drv is handling tx irq. If one queue is rewaken core may call hinic_xmit_frame to send pkt after netif_tx_disable within a short time which may results in accessing memory that has been already freed in hinic_close. So we call napi_disable before netif_tx_disable in hinic_close to fix this bug. Fixes: 2eed5a8b614b ("hinic: add set_channels ethtool_ops support") Signed-off-by: Luo bin Reviewed-by: Jakub Kicinski Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman