user/sven/linux.git, branch v5.8.14

Linux 5.8.14

2020-10-07T06:02:55Z

Tested-by: Jon Hunter Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Jeffrin Jose T Tested-by: Guenter Roeck Link: https://lore.kernel.org/r/20201005142114.732094228@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

ep_create_wakeup_source(): dentry name can change under you...

2020-10-07T06:02:55Z

commit 3701cb59d892b88d569427586f01491552f377b1 upstream. or get freed, for that matter, if it's a long (separately stored) name. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

epoll: EPOLL_CTL_ADD: close the race in decision to take fast path

2020-10-07T06:02:55Z

commit fe0a916c1eae8e17e86c3753d13919177d63ed7e upstream. Checking for the lack of epitems refering to the epoll we want to insert into is not enough; we might have an insertion of that epoll into another one that has already collected the set of files to recheck for excessive reverse paths, but hasn't gotten to creating/inserting the epitem for it. However, any such insertion in progress can be detected - it will update the generation count in our epoll when it's done looking through it for files to check. That gets done under ->mtx of our epoll and that allows us to detect that safely. We are *not* holding epmutex here, so the generation count is not stable. However, since both the update of ep->gen by loop check and (later) insertion into ->f_ep_link are done with ep->mtx held, we are fine - the sequence is grab epmutex bump loop_check_gen ... grab tep->mtx // 1 tep->gen = loop_check_gen ... drop tep->mtx // 2 ... grab tep->mtx // 3 ... insert into ->f_ep_link ... drop tep->mtx // 4 bump loop_check_gen drop epmutex and if the fastpath check in another thread happens for that eventpoll, it can come * before (1) - in that case fastpath is just fine * after (4) - we'll see non-empty ->f_ep_link, slow path taken * between (2) and (3) - loop_check_gen is stable, with ->mtx providing barriers and we end up taking slow path. Note that ->f_ep_link emptiness check is slightly racy - we are protected against insertions into that list, but removals can happen right under us. Not a problem - in the worst case we'll end up taking a slow path for no good reason. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

epoll: replace ->visited/visited_list with generation count

2020-10-07T06:02:55Z

commit 18306c404abe18a0972587a6266830583c60c928 upstream. removes the need to clear it, along with the races. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

epoll: do not insert into poll queues until all sanity checks are done

2020-10-07T06:02:55Z

commit f8d4f44df056c5b504b0d49683fb7279218fd207 upstream. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

scsi: sd: sd_zbc: Fix ZBC disk initialization

2020-10-07T06:02:54Z

commit 6c5dee18756b4721ac8518c69b22ee8ac0c9c442 upstream. Make sure to call sd_zbc_init_disk() when the sdkp->zoned field is known, that is, once sd_read_block_characteristics() is executed in sd_revalidate_disk(), so that host-aware disks also get initialized. To do so, move sd_zbc_init_disk() call in sd_zbc_revalidate_zones() and make sure to execute it for all zoned disks, including for host-aware disks used as regular disks as these disk zoned model may be changed back to BLK_ZONED_HA when partitions are deleted. Link: https://lore.kernel.org/r/20200915073347.832424-3-damien.lemoal@wdc.com Fixes: 5795eb443060 ("scsi: sd_zbc: emulate ZONE_APPEND commands") Cc: # v5.8+ Reported-by: Borislav Petkov Tested-by: Borislav Petkov Reviewed-by: Johannes Thumshirn Reviewed-by: Christoph Hellwig Signed-off-by: Damien Le Moal Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks

2020-10-07T06:02:54Z

commit 27ba3e8ff3ab86449e63d38a8d623053591e65fa upstream. When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as regular disks. In this case, ensure that command completion is correctly executed by changing sd_zbc_complete() to return good_bytes instead of 0 and causing a hang during device probe (endless retries). When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to have partitions, it will be used as a regular disk. In this case, make sure to not do anything in sd_zbc_revalidate_zones() as that triggers warnings. Since all these different cases result in subtle settings of the disk queue zoned model, introduce the block layer helper function blk_queue_set_zoned() to generically implement setting up the effective zoned model according to the disk type, the presence of partitions on the disk and CONFIG_BLK_DEV_ZONED configuration. Link: https://lore.kernel.org/r/20200915073347.832424-2-damien.lemoal@wdc.com Fixes: b72053072c0b ("block: allow partitions on host aware zone devices") Cc: Reported-by: Borislav Petkov Suggested-by: Christoph Hellwig Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Signed-off-by: Damien Le Moal Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

drm/i915/gvt: Fix port number for BDW on EDID region setup

2020-10-07T06:02:54Z

commit 28284943ac94014767ecc2f7b3c5747c4a5617a0 upstream. Current BDW virtual display port is initialized as PORT_B, so need to use same port for VFIO EDID region, otherwise invalid EDID blob pointer is assigned which caused kernel null pointer reference. We might evaluate actual display hotplug for BDW to make this function work as expected, anyway this is always required to be fixed first. Reported-by: Alejandro Sior Cc: Alejandro Sior Fixes: 0178f4ce3c3b ("drm/i915/gvt: Enable vfio edid for all GVT supported platform") Reviewed-by: Hang Yuan Signed-off-by: Zhenyu Wang Link: http://patchwork.freedesktop.org/patch/msgid/20200914030302.2775505-1-zhenyuw@linux.intel.com Signed-off-by: Greg Kroah-Hartman

gpiolib: Fix line event handling in syscall compatible mode

2020-10-07T06:02:54Z

[ Upstream commit 5ad284ab3a01e2d6a89be2a8663ae76f4e617549 ] The introduced line event handling ABI in the commit 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") missed the fact that 64-bit kernel may serve for 32-bit applications. In such case the very first check in the lineevent_read() will fail due to alignment differences. To workaround this introduce lineevent_get_size() helper which returns actual size of the structure in user space. Fixes: 61f922db7221 ("gpio: userspace ABI for reading GPIO line events") Suggested-by: Arnd Bergmann Signed-off-by: Andy Shevchenko Acked-by: Arnd Bergmann Tested-by: Kent Gibson Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

random32: Restore __latent_entropy attribute on net_rand_state

2020-10-07T06:02:54Z

[ Upstream commit 09a6b0bc3be793ca8cba580b7992d73e9f68f15d ] Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") broke compilation and was temporarily fixed by Linus in 83bdc7275e62 ("random32: remove net_rand_state from the latent entropy gcc plugin") by entirely moving net_rand_state out of the things handled by the latent_entropy GCC plugin. From what I understand when reading the plugin code, using the __latent_entropy attribute on a declaration was the wrong part and simply keeping the __latent_entropy attribute on the variable definition was the correct fix. Fixes: 83bdc7275e62 ("random32: remove net_rand_state from the latent entropy gcc plugin") Acked-by: Willy Tarreau Cc: Emese Revfy Signed-off-by: Thibaut Sautereau Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin