user/sven/linux.git, branch v5.9.16

Linux 5.9.16

2020-12-21T12:28:21Z

Tested-by: Guenter Roeck Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Link: https://lore.kernel.org/r/20201219125344.671832095@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

x86/resctrl: Fix incorrect local bandwidth when mba_sc is enabled

2020-12-21T12:28:21Z

commit 06c5fe9b12dde1b62821f302f177c972bb1c81f9 upstream The MBA software controller (mba_sc) is a feedback loop which periodically reads MBM counters and tries to restrict the bandwidth below a user-specified value. It tags along the MBM counter overflow handler to do the updates with 1s interval in mbm_update() and update_mba_bw(). The purpose of mbm_update() is to periodically read the MBM counters to make sure that the hardware counter doesn't wrap around more than once between user samplings. mbm_update() calls __mon_event_count() for local bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count() instead when mba_sc is enabled. __mon_event_count() will not be called for local bandwidth updating in MBM counter overflow handler, but it is still called when reading MBM local bandwidth counter file 'mbm_local_bytes', the call path is as below: rdtgroup_mondata_show() mon_event_read() mon_event_count() __mon_event_count() In __mon_event_count(), m->chunks is updated by delta chunks which is calculated from previous MSR value (m->prev_msr) and current MSR value. When mba_sc is enabled, m->chunks is also updated in mbm_update() by mistake by the delta chunks which is calculated from m->prev_bw_msr instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in the mba_sc feedback loop. When reading MBM local bandwidth counter file, m->chunks was changed unexpectedly by mbm_bw_count(). As a result, the incorrect local bandwidth counter which calculated from incorrect m->chunks is shown to the user. Fix this by removing incorrect m->chunks updating in mbm_bw_count() in MBM counter overflow handler, and always calling __mon_event_count() in mbm_update() to make sure that the hardware local bandwidth counter doesn't wrap around. Test steps: # Run workload with aggressive memory bandwidth (e.g., 10 GB/s) git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat && make ./tools/membw/membw -c 0 -b 10000 --read # Enable MBA software controller mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl # Create control group c1 mkdir /sys/fs/resctrl/c1 # Set MB throttle to 6 GB/s echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata # Write PID of the workload to tasks file echo `pidof membw` > /sys/fs/resctrl/c1/tasks # Read local bytes counters twice with 1s interval, the calculated # local bandwidth is not as expected (approaching to 6 GB/s): local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` sleep 1 local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes` echo "local b/w (bytes/s):" `expr $local_2 - $local_1` Before fix: local b/w (bytes/s): 11076796416 After fix: local b/w (bytes/s): 5465014272 Fixes: ba0f26d8529c (x86/intel_rdt/mba_sc: Prepare for feedback loop) Signed-off-by: Xiaochen Shen Signed-off-by: Borislav Petkov Reviewed-by: Tony Luck Cc: Link: https://lkml.kernel.org/r/1607063279-19437-1-git-send-email-xiaochen.shen@intel.com Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

x86/resctrl: Remove unused struct mbm_state::chunks_bw

2020-12-21T12:28:21Z

commit abe8f12b44250d02937665033a8b750c1bfeb26e upstream Nothing reads struct mbm_states's chunks_bw value, its a copy of chunks. Remove it. Signed-off-by: James Morse Signed-off-by: Borislav Petkov Reviewed-by: Reinette Chatre Link: https://lkml.kernel.org/r/20200708163929.2783-2-james.morse@arm.com Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

membarrier: Explicitly sync remote cores when SYNC_CORE is requested

2020-12-21T12:28:20Z

commit 758c9373d84168dc7d039cf85a0e920046b17b41 upstream. membarrier() does not explicitly sync_core() remote CPUs; instead, it relies on the assumption that an IPI will result in a core sync. On x86, this may be true in practice, but it's not architecturally reliable. In particular, the SDM and APM do not appear to guarantee that interrupt delivery is serializing. While IRET does serialize, IPI return can schedule, thereby switching to another task in the same mm that was sleeping in a syscall. The new task could then SYSRET back to usermode without ever executing IRET. Make this more robust by explicitly calling sync_core_before_usermode() on remote cores. (This also helps people who search the kernel tree for instances of sync_core() and sync_core_before_usermode() -- one might be surprised that the core membarrier code doesn't currently show up in a such a search.) Fixes: 70216e18e519 ("membarrier: Provide core serializing command, *_SYNC_CORE") Signed-off-by: Andy Lutomirski Signed-off-by: Thomas Gleixner Reviewed-by: Mathieu Desnoyers Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/776b448d5f7bd6b12690707f5ed67bcda7f1d427.1607058304.git.luto@kernel.org Signed-off-by: Greg Kroah-Hartman

KVM: mmu: Fix SPTE encoding of MMIO generation upper half

2020-12-21T12:28:20Z

commit 34c0f6f2695a2db81e09a3ab7bdb2853f45d4d3d upstream. Commit cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") cleaned up the computation of MMIO generation SPTE masks, however it introduced a bug how the upper part was encoded: SPTE bits 52-61 were supposed to contain bits 10-19 of the current generation number, however a missing shift encoded bits 1-10 there instead (mostly duplicating the lower part of the encoded generation number that then consisted of bits 1-9). In the meantime, the upper part was shrunk by one bit and moved by subsequent commits to become an upper half of the encoded generation number (bits 9-17 of bits 0-17 encoded in a SPTE). In addition to the above, commit 56871d444bc4 ("KVM: x86: fix overlap between SPTE_MMIO_MASK and generation") has changed the SPTE bit range assigned to encode the generation number and the total number of bits encoded but did not update them in the comment attached to their defines, nor in the KVM MMU doc. Let's do it here, too, since it is too trivial thing to warrant a separate commit. Fixes: cae7ed3c2cb0 ("KVM: x86: Refactor the MMIO SPTE generation handling") Signed-off-by: Maciej S. Szmigiero Message-Id: <156700708db2a5296c5ed7a8b9ac71f1e9765c85.1607129096.git.maciej.szmigiero@oracle.com> Cc: stable@vger.kernel.org [Reorganize macros so that everything is computed from the bit ranges. - Paolo] Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access

2020-12-21T12:28:20Z

commit d96f04d347e4011977abdbb4da5d8f303ebd26f8 upstream. It has been observed that once per 300-1300 port openings the first transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared as "e" on the wire). It only happened if single byte has been transmitted right after port open, which means, DMA is not used for this transfer and the corruption never happened afterwards. Therefore I've carefully re-read the MDR1 errata (link below), which says "when accessing the MDR1 registers that causes a dummy under-run condition that will freeze the UART in IrDA transmission. In UART mode, this may corrupt the transferred data". Strictly speaking, omap_8250_mdr1_errataset() performs a read access and if the value is the same as should be written, exits without errata-recommended FIFO reset. A brief check of the serial_omap_mdr1_errataset() from the competing omap-serial driver showed it has no read access of MDR1. After removing the read access from omap_8250_mdr1_errataset() the data corruption never happened any more. Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin Link: https://lore.kernel.org/r/20201210055257.1053028-1-alexander.sverdlin@gmail.com Signed-off-by: Greg Kroah-Hartman

ALSA: pcm: oss: Fix potential out-of-bounds shift

2020-12-21T12:28:20Z

commit 175b8d89fe292796811fdee87fa39799a5b6b87a upstream. syzbot spotted a potential out-of-bounds shift in the PCM OSS layer where it calculates the buffer size with the arbitrary shift value given via an ioctl. Add a range check for avoiding the undefined behavior. As the value can be treated by a signed integer, the max shift should be 30. Reported-by: syzbot+df7dc146ebdd6435eea3@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/20201209084552.17109-2-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

USB: sisusbvga: Make console support depend on BROKEN

2020-12-21T12:28:20Z

commit 862ee699fefe1e6d6f2c1518395f0b999b8beb15 upstream. The console part of sisusbvga is broken vs. printk(). It uses in_atomic() to detect contexts in which it cannot sleep despite the big fat comment in preempt.h which says: Do not use in_atomic() in driver code. in_atomic() does not work on kernels with CONFIG_PREEMPT_COUNT=n which means that spin/rw_lock held regions are not detected by it. There is no way to make this work by handing context information through to the driver and this only can be solved once the core printk infrastructure supports sleepable console drivers. Make it depend on BROKEN for now. Fixes: 1bbb4f2035d9 ("[PATCH] USB: sisusb[vga] update") Signed-off-by: Thomas Gleixner Cc: Thomas Winischhofer Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201019101109.603244207@linutronix.de Signed-off-by: Greg Kroah-Hartman

USB: UAS: introduce a quirk to set no_write_same

2020-12-21T12:28:20Z

commit 8010622c86ca5bb44bc98492f5968726fc7c7a21 upstream. UAS does not share the pessimistic assumption storage is making that devices cannot deal with WRITE_SAME. A few devices supported by UAS, are reported to not deal well with WRITE_SAME. Those need a quirk. Add it to the device that needs it. Reported-by: David C. Partridge Signed-off-by: Oliver Neukum Cc: stable Link: https://lore.kernel.org/r/20201209152639.9195-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman

xhci-pci: Allow host runtime PM as default for Intel Maple Ridge xHCI

2020-12-21T12:28:20Z

commit 5a8e3229ac27956bdcc25b2709e5d196d109a27a upstream. Intel Maple Ridge is successor of Titan Ridge Thunderbolt controller. As Titan Ridge this one also includes xHCI host controller. In order to safe energy we should put it to low power state by default when idle. For this reason allow host runtime PM for Maple Ridge. Signed-off-by: Mika Westerberg Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20201208092912.1773650-5-mathias.nyman@linux.intel.com Cc: stable Signed-off-by: Greg Kroah-Hartman