user/sven/linux.git, branch v6.1.147

Linux 6.1.147

2025-07-24T06:51:55Z

Link: https://lore.kernel.org/r/20250722134328.384139905@linuxfoundation.org Tested-by: Brett A C Sheffield Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Miguel Ojeda Tested-by: Peter Schneider Tested-by: Mark Brown Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Hardik Garg Tested-by: Ron Economos Signed-off-by: Greg Kroah-Hartman

nvmem: layouts: u-boot-env: remove crc32 endianness conversion

2025-07-24T06:51:55Z

commit 2d7521aa26ec2dc8b877bb2d1f2611a2df49a3cf upstream. On 11 Oct 2022, it was reported that the crc32 verification of the u-boot environment failed only on big-endian systems for the u-boot-env nvmem layout driver with the following error. Invalid calculated CRC32: 0x88cd6f09 (expected: 0x096fcd88) This problem has been present since the driver was introduced, and before it was made into a layout driver. The suggested fix at the time was to use further endianness conversion macros in order to have both the stored and calculated crc32 values to compare always represented in the system's endianness. This was not accepted due to sparse warnings and some disagreement on how to handle the situation. Later on in a newer revision of the patch, it was proposed to use cpu_to_le32() for both values to compare instead of le32_to_cpu() and store the values as __le32 type to remove compilation errors. The necessity of this is based on the assumption that the use of crc32() requires endianness conversion because the algorithm uses little-endian, however, this does not prove to be the case and the issue is unrelated. Upon inspecting the current kernel code, there already is an existing use of le32_to_cpu() in this driver, which suggests there already is special handling for big-endian systems, however, it is big-endian systems that have the problem. This, being the only functional difference between architectures in the driver combined with the fact that the suggested fix was to use the exact same endianness conversion for the values brings up the possibility that it was not necessary to begin with, as the same endianness conversion for two values expected to be the same is expected to be equivalent to no conversion at all. After inspecting the u-boot environment of devices of both endianness and trying to remove the existing endianness conversion, the problem is resolved in an equivalent way as the other suggested fixes. Ultimately, it seems that u-boot is agnostic to endianness at least for the purpose of environment variables. In other words, u-boot reads and writes the stored crc32 value with the same endianness that the crc32 value is calculated with in whichever endianness a certain architecture runs on. Therefore, the u-boot-env driver does not need to convert endianness. Remove the usage of endianness macros in the u-boot-env driver, and change the type of local variables to maintain the same return type. If there is a special situation in the case of endianness, it would be a corner case and should be handled by a unique "compatible". Even though it is not necessary to use endianness conversion macros here, it may be useful to use them in the future for consistent error printing. Fixes: d5542923f200 ("nvmem: add driver handling U-Boot environment variables") Reported-by: INAGAKI Hiroshi Link: https://lore.kernel.org/all/20221011024928.1807-1-musashino.open@gmail.com Cc: stable@vger.kernel.org Signed-off-by: "Michael C. Pratt" Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20250716144210.4804-1-srini@kernel.org [ applied changes to drivers/nvmem/u-boot-env.c before code was moved to drivers/nvmem/layouts/u-boot-env.c ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mm/vmalloc: leave lazy MMU mode on PTE mapping error

2025-07-24T06:51:55Z

commit fea18c686320a53fce7ad62a87a3e1d10ad02f31 upstream. vmap_pages_pte_range() enters the lazy MMU mode, but fails to leave it in case an error is encountered. Link: https://lkml.kernel.org/r/20250623075721.2817094-1-agordeev@linux.ibm.com Fixes: 2ba3e6947aed ("mm/vmalloc: track which page-table levels were modified") Signed-off-by: Alexander Gordeev Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202506132017.T1l1l6ME-lkp@intel.com/ Reviewed-by: Ryan Roberts Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

Bluetooth: HCI: Set extended advertising data synchronously

2025-07-24T06:51:55Z

commit 89fb8acc38852116d38d721ad394aad7f2871670 upstream. Currently, for controllers with extended advertising, the advertising data is set in the asynchronous response handler for extended adverstising params. As most advertising settings are performed in a synchronous context, the (asynchronous) setting of the advertising data is done too late (after enabling the advertising). Move setting of adverstising data from asynchronous response handler into synchronous context to fix ordering of HCI commands. Signed-off-by: Christian Eggers Fixes: a0fb3726ba55 ("Bluetooth: Use Set ext adv/scan rsp data if controller supports") Cc: stable@vger.kernel.org v2: https://lore.kernel.org/linux-bluetooth/20250626115209.17839-1-ceggers@arri.de/ Signed-off-by: Luiz Augusto von Dentz [ Adapted DEFINE_FLEX macro usage to struct with flexible array member for compatibility with kernel 6.1. ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ASoC: fsl_sai: Force a software reset when starting in consumer mode

2025-07-24T06:51:55Z

commit dc78f7e59169d3f0e6c3c95d23dc8e55e95741e2 upstream. On an imx8mm platform with an external clock provider, when running the receiver (arecord) and triggering an xrun with xrun_injection, we see a channel swap/offset. This happens sometimes when running only the receiver, but occurs reliably if a transmitter (aplay) is also concurrently running. It seems that the SAI loses track of frame sync during the trigger stop -> trigger start cycle that occurs during an xrun. Doing just a FIFO reset in this case does not suffice, and only a software reset seems to get it back on track. This looks like the same h/w bug that is already handled for the producer case, so we now do the reset unconditionally on config disable. Signed-off-by: Arun Raghavan Reported-by: Pieterjan Camerlynck Fixes: 3e3f8bd56955 ("ASoC: fsl_sai: fix no frame clk in master mode") Cc: stable@vger.kernel.org Reviewed-by: Fabio Estevam Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

usb: dwc3: qcom: Don't leave BCR asserted

2025-07-24T06:51:55Z

commit ef8abc0ba49ce717e6bc4124e88e59982671f3b5 upstream. Leaving the USB BCR asserted prevents the associated GDSC to turn on. This blocks any subsequent attempts of probing the device, e.g. after a probe deferral, with the following showing in the log: [ 1.332226] usb30_prim_gdsc status stuck at 'off' Leave the BCR deasserted when exiting the driver to avoid this issue. Cc: stable Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Acked-by: Thinh Nguyen Reviewed-by: Konrad Dybcio Signed-off-by: Krishna Kurapati Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com [ adapted to individual clock management API instead of bulk clock operations ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: musb: fix gadget state on disconnect

2025-07-24T06:51:54Z

commit 67a59f82196c8c4f50c83329f0577acfb1349b50 upstream. When unplugging the USB cable or disconnecting a gadget in usb peripheral mode with echo "" > /sys/kernel/config/usb_gadget//UDC, /sys/class/udc/musb-hdrc.0/state does not change from USB_STATE_CONFIGURED. Testing on dwc2/3 shows they both update the state to USB_STATE_NOTATTACHED. Add calls to usb_gadget_set_state in musb_g_disconnect and musb_gadget_stop to fix both cases. Fixes: 49401f4169c0 ("usb: gadget: introduce gadget state tracking") Cc: stable@vger.kernel.org Co-authored-by: Yehowshua Immanuel Signed-off-by: Yehowshua Immanuel Signed-off-by: Drew Hamilton Link: https://lore.kernel.org/r/20250701154126.8543-1-drew.hamilton@zetier.com Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: musb: Add and use inline functions musb_{get,set}_state

2025-07-24T06:51:54Z

commit 21acc656a06e912341d9db66c67b58cc7ed071e7 upstream. Instead of manipulating musb->xceiv->otg->state directly, use the newly introduced musb_get_state() and musb_set_state() inline functions. Later, these inline functions will be modified to get rid of the musb->xceiv dependency, which prevents the musb code from using the generic PHY subsystem. Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20221026182657.146630-2-paul@crapouillou.net Stable-dep-of: 67a59f82196c ("usb: musb: fix gadget state on disconnect") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: hub: Don't try to recover devices lost during warm reset.

2025-07-24T06:51:54Z

commit 2521106fc732b0b75fd3555c689b1ed1d29d273c upstream. Hub driver warm-resets ports in SS.Inactive or Compliance mode to recover a possible connected device. The port reset code correctly detects if a connection is lost during reset, but hub driver port_event() fails to take this into account in some cases. port_event() ends up using stale values and assumes there is a connected device, and will try all means to recover it, including power-cycling the port. Details: This case was triggered when xHC host was suspended with DbC (Debug Capability) enabled and connected. DbC turns one xHC port into a simple usb debug device, allowing debugging a system with an A-to-A USB debug cable. xhci DbC code disables DbC when xHC is system suspended to D3, and enables it back during resume. We essentially end up with two hosts connected to each other during suspend, and, for a short while during resume, until DbC is enabled back. The suspended xHC host notices some activity on the roothub port, but can't train the link due to being suspended, so xHC hardware sets a CAS (Cold Attach Status) flag for this port to inform xhci host driver that the port needs to be warm reset once xHC resumes. CAS is xHCI specific, and not part of USB specification, so xhci driver tells usb core that the port has a connection and link is in compliance mode. Recovery from complinace mode is similar to CAS recovery. xhci CAS driver support that fakes a compliance mode connection was added in commit 8bea2bd37df0 ("usb: Add support for root hub port status CAS") Once xHCI resumes and DbC is enabled back, all activity on the xHC roothub host side port disappears. The hub driver will anyway think port has a connection and link is in compliance mode, and hub driver will try to recover it. The port power-cycle during recovery seems to cause issues to the active DbC connection. Fix this by clearing connect_change flag if hub_port_reset() returns -ENOTCONN, thus avoiding the whole unnecessary port recovery and initialization attempt. Cc: stable@vger.kernel.org Fixes: 8bea2bd37df0 ("usb: Add support for root hub port status CAS") Tested-by: Łukasz Bartosik Signed-off-by: Mathias Nyman Acked-by: Alan Stern Link: https://lore.kernel.org/r/20250623133947.3144608-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: hub: Fix flushing of delayed work used for post resume purposes

2025-07-24T06:51:54Z

commit 9bd9c8026341f75f25c53104eb7e656e357ca1a2 upstream. Delayed work that prevents USB3 hubs from runtime-suspending too early needed to be flushed in hub_quiesce() to resolve issues detected on QC SC8280XP CRD board during suspend resume testing. This flushing did however trigger new issues on Raspberry Pi 3B+, which doesn't have USB3 ports, and doesn't queue any post resume delayed work. The flushed 'hub->init_work' item is used for several purposes, and is originally initialized with a 'NULL' work function. The work function is also changed on the fly, which may contribute to the issue. Solve this by creating a dedicated delayed work item for post resume work, and flush that delayed work in hub_quiesce() Cc: stable Fixes: a49e1e2e785f ("usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm") Reported-by: Mark Brown Closes: https://lore.kernel.org/linux-usb/aF5rNp1l0LWITnEB@finisterre.sirena.org.uk Signed-off-by: Mathias Nyman Tested-by: Konrad Dybcio # SC8280XP CRD Tested-by: Mark Brown Link: https://lore.kernel.org/r/20250627164348.3982628-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman