user/sven/linux.git, branch v6.1.31

Linux 6.1.31

2023-05-30T13:03:33Z

Link: https://lore.kernel.org/r/20230528190835.386670951@linuxfoundation.org Tested-by: Bagas Sanjaya Tested-by: Takeshi Ogasawara Tested-by: Conor Dooley Tested-by: Markus Reichelt Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Tested-by: Ron Economos Tested-by: Jon Hunter Tested-by: Chris Paterson (CIP) Signed-off-by: Greg Kroah-Hartman

net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE

2023-05-30T13:03:33Z

commit 57fb54ab9f6945e204740b696bd4cee61ee04e5e upstream. The mscc driver implements support for VSC8502, so its ID should be in the MODULE_DEVICE_TABLE for automatic loading. Signed-off-by: David Epping Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Reviewed-by: Vladimir Oltean Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

3c589_cs: Fix an error handling path in tc589_probe()

2023-05-30T13:03:33Z

commit 640bf95b2c7c2981fb471acdafbd3e0458f8390d upstream. Should tc589_config() fail, some resources need to be released as already done in the remove function. Fixes: 15b99ac17295 ("[PATCH] pcmcia: add return value to _config() functions") Signed-off-by: Christophe JAILLET Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/d8593ae867b24c79063646e36f9b18b0790107cb.1684575975.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net/smc: Reset connection when trying to use SMCRv2 fails.

2023-05-30T13:03:33Z

commit 35112271672ae98f45df7875244a4e33aa215e31 upstream. We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It can be reproduced by: - smc_run nginx - smc_run wrk -t 32 -c 500 -d 30 http://: BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000000108713067 P4D 8000000108713067 PUD 151127067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42 Workqueue: smc_hs_wq smc_listen_work [smc] RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc] RSP: 0018:ffffb8294b2d7c78 EFLAGS: 00010a06 RAX: ffff8f1873238880 RBX: ffffb8294b2d7dc8 RCX: 0000000000000000 RDX: 00000000000000b4 RSI: 0000000000000001 RDI: 0000000000b40c00 RBP: ffffb8294b2d7db8 R08: ffff8f1815c5860c R09: 0000000000000000 R10: 0000000000000400 R11: 0000000000000000 R12: ffff8f1846f56180 R13: ffff8f1815c5860c R14: 0000000000000001 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8f1aefd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 00000001027a0001 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib] ? smcr_buf_map_link+0x24b/0x290 [smc] ? __smc_buf_create+0x4ee/0x9b0 [smc] smc_clc_send_accept+0x4c/0xb0 [smc] smc_listen_work+0x346/0x650 [smc] ? __schedule+0x279/0x820 process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 During the CLC handshake, server sequentially tries available SMCRv2 and SMCRv1 devices in smc_listen_work(). If an SMCRv2 device is found. SMCv2 based link group and link will be assigned to the connection. Then assumed that some buffer assignment errors happen later in the CLC handshake, such as RMB registration failure, server will give up SMCRv2 and try SMCRv1 device instead. But the resources assigned to the connection won't be reset. When server tries SMCRv1 device, the connection creation process will be executed again. Since conn->lnk has been assigned when trying SMCRv2, it will not be set to the correct SMCRv1 link in smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to correct SMCRv1 link group but conn->lnk points to the SMCRv2 link mistakenly. Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx] will be accessed. Since the link->link_idx is not correct, the related MR may not have been initialized, so crash happens. | Try SMCRv2 device first | |-> conn->lgr: assign existed SMCRv2 link group; | |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC); | |-> sndbuf & RMB creation fails, quit; | | Try SMCRv1 device then | |-> conn->lgr: create SMCRv1 link group and assign; | |-> conn->link: keep SMCRv2 link mistakenly; | |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0] | initialized. | | Then smc_clc_send_confirm_accept() accesses | conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash. v This patch tries to fix this by cleaning conn->lnk before assigning link. In addition, it is better to reset the connection and clean the resources assigned if trying SMCRv2 failed in buffer creation or registration. Fixes: e49300a6bf62 ("net/smc: add listen processing for SMC-Rv2") Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/ Signed-off-by: Wen Gu Reviewed-by: Tony Lu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

regulator: mt6359: add read check for PMIC MT6359

2023-05-30T13:03:33Z

commit a511637502b1caa135046d0f8fdabd55a31af8ef upstream. Add hardware version read check for PMIC MT6359 Signed-off-by: Sen Chu

firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors

2023-05-30T13:03:33Z

commit 111a833dc5cbef3d05b2a796a7e23cb7f6ff2192 upstream. The transmit buffers allocated by the driver can be used to transmit data by any messages/commands needing the buffer. However, it is not guaranteed to have been zero-ed before every new transmission and hence it will just contain residual value from the previous transmission. There are several reserved fields in the memory descriptors that must be zero(MBZ). The receiver can reject the transmission if any such MBZ fields are non-zero. While we can set the whole page to zero, it is not optimal as most of the fields get initialised to the value required for the current transmission. So, just set the reserved/MBZ fields to zero in the memory descriptors explicitly to honour the requirement and keep the receiver happy. Fixes: cc2195fe536c ("firmware: arm_ffa: Add support for MEM_* interfaces") Reported-by: Marc Bonnici Link: https://lore.kernel.org/r/20230503131252.12585-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman

arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay

2023-05-30T13:03:33Z

commit f161cea5a20f3aeeb637a88ad1705fc2720b4d58 upstream. While testing the ethernet interface on a Variscite symphony carrier board using an imx8mn SOM with an onboard ADIN1300 PHY (EC hardware configuration), the ethernet PHY is not detected. The ADIN1300 datasheet indicate that the "Management interface active (t4)" state is reached at most 5ms after the reset signal is deasserted. The device tree in Variscite custom git repository uses the following property: phy-reset-post-delay = <20>; Add a new MDIO property 'reset-deassert-us' of 20ms to have the same delay inside the ethphy node. Adding this property fixes the problem with the PHY detection. Note that this SOM can also have an Atheros AR8033 PHY. In this case, a 1ms deassert delay is sufficient. Add a comment to that effect. Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module") Signed-off-by: Hugo Villeneuve Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

net/mlx5: Devcom, serialize devcom registration

2023-05-30T13:03:33Z

commit 1f893f57a3bf9fe1f4bcb25b55aea7f7f9712fe7 upstream. From one hand, mlx5 driver is allowing to probe PFs in parallel. From the other hand, devcom, which is a share resource between PFs, is registered without any lock. This might resulted in memory problems. Hence, use the global mlx5_dev_list_lock in order to serialize devcom registration. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Shay Drory Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5: Devcom, fix error flow in mlx5_devcom_register_device

2023-05-30T13:03:33Z

commit af87194352cad882d787d06fb7efa714acd95427 upstream. In case devcom allocation is failed, mlx5 is always freeing the priv. However, this priv might have been allocated by a different thread, and freeing it might lead to use-after-free bugs. Fix it by freeing the priv only in case it was allocated by the running thread. Fixes: fadd59fc50d0 ("net/mlx5: Introduce inter-device communication mechanism") Signed-off-by: Shay Drory Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5: Collect command failures data only for known commands

2023-05-30T13:03:33Z

commit 2a0a935fb64ee8af253b9c6133bb6702fb152ac2 upstream. DEVX can issue a general command, which is not used by mlx5 driver. In case such command is failed, mlx5 is trying to collect the failure data, However, mlx5 doesn't create a storage for this command, since mlx5 doesn't use it. This lead to array-index-out-of-bounds error. Fix it by checking whether the command is known before collecting the failure data. Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs") Signed-off-by: Shay Drory Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman