user/sven/linux.git, branch v6.1.65

Linux 6.1.65

2023-12-03T06:32:13Z

Link: https://lore.kernel.org/r/20231130162135.977485944@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Jon Hunter Tested-by: Conor Dooley Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Tested-by: SeongJae Park Tested-by: Ron Economos Signed-off-by: Greg Kroah-Hartman

io_uring: fix off-by one bvec index

2023-12-03T06:32:13Z

commit d6fef34ee4d102be448146f24caf96d7b4a05401 upstream. If the offset equals the bv_len of the first registered bvec, then the request does not include any of that first bvec. Skip it so that drivers don't have to deal with a zero length bvec, which was observed to break NVMe's PRP list creation. Cc: stable@vger.kernel.org Fixes: bd11b3a391e3 ("io_uring: don't use iov_iter_advance() for fixed buffers") Signed-off-by: Keith Busch Link: https://lore.kernel.org/r/20231120221831.2646460-1-kbusch@meta.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

USB: dwc3: qcom: fix wakeup after probe deferral

2023-12-03T06:32:13Z

commit 41f5a0973259db9e4e3c9963d36505f80107d1a0 upstream. The Qualcomm glue driver is overriding the interrupt trigger types defined by firmware when requesting the wakeup interrupts during probe. This can lead to a failure to map the DP/DM wakeup interrupts after a probe deferral as the firmware defined trigger types do not match the type used for the initial mapping: irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000! irq: type mismatch, failed to map hwirq-15 for interrupt-controller@b220000! Fix this by not overriding the firmware provided trigger types when requesting the wakeup interrupts. Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Signed-off-by: Johan Hovold Reviewed-by: Andrew Halaney Link: https://lore.kernel.org/r/20231120161607.7405-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

USB: dwc3: qcom: fix software node leak on probe errors

2023-12-03T06:32:12Z

commit 9feefbf57d92e8ee293dad67585d351c7d0b6e37 upstream. Make sure to remove the software node also on (ACPI) probe errors to avoid leaking the underlying resources. Note that the software node is only used for ACPI probe so the driver unbind tear down is updated to match probe. Fixes: 8dc6e6dd1bee ("usb: dwc3: qcom: Constify the software node") Cc: stable@vger.kernel.org # 5.12 Cc: Heikki Krogerus Signed-off-by: Johan Hovold Acked-by: Heikki Krogerus Acked-by: Andrew Halaney Link: https://lore.kernel.org/r/20231117173650.21161-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: set the dma max_seg_size

2023-12-03T06:32:12Z

commit 8bbae288a85abed6a1cf7d185d8b9dc2f5dcb12c upstream. Allow devices to have dma operations beyond 4K, and avoid warnings such as: DMA-API: dwc3 a600000.usb: mapping sg segment longer than device claims to support [len=86016] [max=65536] Cc: stable@vger.kernel.org Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Reported-by: Zubin Mithra Signed-off-by: Ricardo Ribalda Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20231026-dwc3-v2-1-1d4fd5c3e067@chromium.org Signed-off-by: Greg Kroah-Hartman

usb: dwc3: Fix default mode initialization

2023-12-03T06:32:12Z

commit 10d510abd096d620b9fda2dd3e0047c5efc4ad2b upstream. The default mode, configurable by DT, shall be set before usb role switch driver is registered. Otherwise there is a race between default mode and mode set by usb role switch driver. Fixes: 98ed256a4dbad ("usb: dwc3: Add support for role-switch-default-mode binding") Cc: stable Signed-off-by: Alexander Stein Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20231025095110.2405281-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman

USB: dwc2: write HCINT with INTMASK applied

2023-12-03T06:32:12Z

commit 0583bc776ca5b5a3f5752869fc31cf7322df2b35 upstream. dwc2_hc_n_intr() writes back INTMASK as read but evaluates it with intmask applied. In stress testing this causes spurious interrupts like this: [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 7 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:07 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 0 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: hcint 0x00000002, intsts 0x04600001 [Mon Aug 14 10:51:08 2023] dwc2 3f980000.usb: dwc2_update_urb_state_abn(): trimming xfer length Applying INTMASK prevents this. The issue exists in all versions of the driver. Signed-off-by: Oliver Neukum Tested-by: Ivan Ivanov Tested-by: Andrea della Porta Link: https://lore.kernel.org/r/20231115144514.15248-1-oneukum@suse.com Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: typec: tcpm: Skip hard reset when in error recovery

2023-12-03T06:32:12Z

commit a6fe37f428c19dd164c2111157d4a1029bd853aa upstream. Hard reset queued prior to error recovery (or) received during error recovery will make TCPM to prematurely exit error recovery sequence. Ignore hard resets received during error recovery (or) port reset sequence. ``` [46505.459688] state change SNK_READY -> ERROR_RECOVERY [rev3 NONE_AMS] [46505.459706] state change ERROR_RECOVERY -> PORT_RESET [rev3 NONE_AMS] [46505.460433] disable vbus discharge ret:0 [46505.461226] Setting usb_comm capable false [46505.467244] Setting voltage/current limit 0 mV 0 mA [46505.467262] polarity 0 [46505.470695] Requesting mux state 0, usb-role 0, orientation 0 [46505.475621] cc:=0 [46505.476012] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS] [46505.476020] Received hard reset [46505.476024] state change PORT_RESET -> HARD_RESET_START [rev3 HARD_RESET] ``` Cc: stable@vger.kernel.org Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Signed-off-by: Badhri Jagan Sridharan Acked-by: Heikki Krogeus Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20231101021909.2962679-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman

USB: serial: option: don't claim interface 4 for ZTE MF290

2023-12-03T06:32:12Z

commit 8771127e25d6c20d458ad27cf32f7fcfc1755e05 upstream. Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Free the interface up, to rebind it to qmi_wwan driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork Signed-off-by: Lech Perczak Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: fix FM101R-GL defines

2023-12-03T06:32:12Z

commit a1092619dd28ac0fcf23016160a2fdccd98ef935 upstream. Modify the definition of the two Fibocom FM101R-GL PID macros, which had their PIDs switched. The correct PIDs are: - VID:PID 413C:8213, FM101R-GL ESIM are laptop M.2 cards (with MBIM interfaces for Linux) - VID:PID 413C:8215, FM101R-GL are laptop M.2 cards (with MBIM interface for Linux) 0x8213: mbim, tty 0x8215: mbim, tty Signed-off-by: Puliang Lu Fixes: 52480e1f1a25 ("USB: serial: option: add Fibocom to DELL custom modem FM101R-GL") Link: https://lore.kernel.org/lkml/TYZPR02MB508845BAD7936A62A105CE5D89DFA@TYZPR02MB5088.apcprd02.prod.outlook.com/ Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman