user/sven/linux.git, branch v6.15.7

Linux 6.15.7

2025-07-17T16:44:05Z

Link: https://lore.kernel.org/r/20250715130814.854109770@linuxfoundation.org Tested-by: Ronald Warsow Tested-by: Justin M. Forbes Tested-by: Miguel Ojeda Tested-by: Takeshi Ogasawara Tested-By: Achill Gilgenast Tested-by: Luna Jernberg Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Tested-by: Mark Brown Tested-by: Ron Economos Tested-by: Dileep Malepu Tested-by: Shuah Khan Tested-by: Markus Reichelt Tested-by: Peter Schneider Tested-by: Christian Heusel Tested-by: Florian Fainelli Tested-by: Brett A C Sheffield Signed-off-by: Greg Kroah-Hartman

ksmbd: fix potential use-after-free in oplock/lease break ack

2025-07-17T16:44:04Z

commit 50f930db22365738d9387c974416f38a06e8057e upstream. If ksmbd_iov_pin_rsp return error, use-after-free can happen by accessing opinfo->state and opinfo_put and ksmbd_fd_put could called twice. Reported-by: Ziyan Xu Signed-off-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman

x86/sev: Use TSC_FACTOR for Secure TSC frequency calculation

2025-07-17T16:44:04Z

commit 52e1a03e6cf61ae165f59f41c44394a653a0a788 upstream. When using Secure TSC, the GUEST_TSC_FREQ MSR reports a frequency based on the nominal P0 frequency, which deviates slightly (typically ~0.2%) from the actual mean TSC frequency due to clocking parameters. Over extended VM uptime, this discrepancy accumulates, causing clock skew between the hypervisor and a SEV-SNP VM, leading to early timer interrupts as perceived by the guest. The guest kernel relies on the reported nominal frequency for TSC-based timekeeping, while the actual frequency set during SNP_LAUNCH_START may differ. This mismatch results in inaccurate time calculations, causing the guest to perceive hrtimers as firing earlier than expected. Utilize the TSC_FACTOR from the SEV firmware's secrets page (see "Secrets Page Format" in the SNP Firmware ABI Specification) to calculate the mean TSC frequency, ensuring accurate timekeeping and mitigating clock skew in SEV-SNP VMs. Use early_ioremap_encrypted() to map the secrets page as ioremap_encrypted() uses kmalloc() which is not available during early TSC initialization and causes a panic. [ bp: Drop the silly dummy var: https://lore.kernel.org/r/20250630192726.GBaGLlHl84xIopx4Pt@fat_crate.local ] Fixes: 73bbf3b0fbba ("x86/tsc: Init the TSC for Secure TSC guests") Signed-off-by: Nikunj A Dadhania Signed-off-by: Borislav Petkov (AMD) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/20250630081858.485187-1-nikunj@amd.com Signed-off-by: Greg Kroah-Hartman

net: wangxun: revert the adjustment of the IRQ vector sequence

2025-07-17T16:44:04Z

commit e37546ad1f9b2c777d3a21d7e50ce265ee3dece8 upstream. Due to hardware limitations of NGBE, queue IRQs can only be requested on vector 0 to 7. When the number of queues is set to the maximum 8, the PCI IRQ vectors are allocated from 0 to 8. The vector 0 is used by MISC interrupt, and althrough the vector 8 is used by queue interrupt, it is unable to receive packets. This will cause some packets to be dropped when RSS is enabled and they are assigned to queue 8. So revert the adjustment of the MISC IRQ location, to make it be the last one in IRQ vectors. Fixes: 937d46ecc5f9 ("net: wangxun: add ethtool_ops for channel number") Cc: stable@vger.kernel.org Signed-off-by: Jiawen Wu Reviewed-by: Larysa Zaremba Link: https://patch.msgid.link/20250701063030.59340-3-jiawenwu@trustnetic.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

selftests/bpf: adapt one more case in test_lru_map to the new target_free

2025-07-17T16:44:04Z

commit 5e9388f7984a9cc7e659a105113f6ccf0aebedd0 upstream. The below commit that updated BPF_MAP_TYPE_LRU_HASH free target, also updated tools/testing/selftests/bpf/test_lru_map to match. But that missed one case that passes with 4 cores, but fails at higher cpu counts. Update test_lru_sanity3 to also adjust its expectation of target_free. This time tested with 1, 4, 16, 64 and 384 cpu count. Fixes: d4adf1c9ee77 ("bpf: Adjust free target to avoid global starvation of LRU map") Signed-off-by: Willem de Bruijn Link: https://lore.kernel.org/r/20250625210412.2732970-1-willemdebruijn.kernel@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Greg Kroah-Hartman

HID: nintendo: avoid bluetooth suspend/resume stalls

2025-07-17T16:44:04Z

[ Upstream commit 4a0381080397e77792a5168069f174d3e56175ff ] Ensure we don't stall or panic the kernel when using bluetooth-connected controllers. This was reported as an issue on android devices using kernel 6.6 due to the resume hook which had been added for usb joycons. First, set a new state value to JOYCON_CTLR_STATE_SUSPENDED in a newly-added nintendo_hid_suspend. This makes sure we will not stall out the kernel waiting for input reports during led classdev suspend. The stalls could happen if connectivity is unreliable or lost to the controller prior to suspend. Second, since we lose connectivity during suspend, do not try joycon_init() for bluetooth controllers in the nintendo_hid_resume path. Tested via multiple suspend/resume flows when using the controller both in USB and bluetooth modes. Signed-off-by: Daniel J. Ogorchock Reviewed-by: Silvan Jegen Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras

2025-07-17T16:44:04Z

[ Upstream commit 54bae4c17c11688339eb73a04fd24203bb6e7494 ] The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C) report a HID sensor interface that is not actually implemented. Attempting to access this non-functional sensor via iio_info causes system hangs as runtime PM tries to wake up an unresponsive sensor. Add these 2 devices to the HID ignore list since the sensor interface is non-functional by design and should not be exposed to userspace. Signed-off-by: Chia-Lin Kao (AceLan) Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY

2025-07-17T16:44:03Z

[ Upstream commit 1a8953f4f7746c6a515989774fe03047c522c613 ] MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an audio device is requested to get specific report id, the following error may occur. [ 562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd [ 563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00 [ 563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 563.104911] usb 1-1.4.1.2: Product: USB Composite Device [ 563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology [ 563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001 [ 563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35 [ 563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2 [ 563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint [ 568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) [ 588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110) Ignore HID interface. The device is working properly. Signed-off-by: Zhang Heng Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

riscv: vdso: Exclude .rodata from the PT_DYNAMIC segment

2025-07-17T16:44:03Z

[ Upstream commit e0eb1b6b0cd29ca7793c501d5960fd36ba11f110 ] .rodata is implicitly included in the PT_DYNAMIC segment due to inheriting the segment of the preceding .dynamic section (in both GNU ld and LLD). When the .rodata section's size is not a multiple of 16 bytes on riscv64, llvm-readelf will report a "PT_DYNAMIC dynamic table is invalid" warning. Note: in the presence of the .dynamic section, GNU readelf and llvm-readelf's -d option decodes the dynamic section using the section. This issue arose after commit 8f8c1ff879fab60f80f3a7aec3000f47e5b03ba9 ("riscv: vdso.lds.S: remove hardcoded 0x800 .text start addr"), which placed .rodata directly after .dynamic by removing .eh_frame. This patch resolves the implicit inclusion into PT_DYNAMIC by explicitly specifying the :text output section phdr. Reported-by: Nathan Chancellor Closes: https://github.com/ClangBuiltLinux/linux/issues/2093 Signed-off-by: Fangrui Song Tested-by: Nathan Chancellor Link: https://lore.kernel.org/r/20250602-riscv-vdso-v1-1-0620cf63cff0@maskray.me Signed-off-by: Palmer Dabbelt Signed-off-by: Sasha Levin

bpf: Adjust free target to avoid global starvation of LRU map

2025-07-17T16:44:03Z

[ Upstream commit d4adf1c9ee7722545450608bcb095fb31512f0c6 ] BPF_MAP_TYPE_LRU_HASH can recycle most recent elements well before the map is full, due to percpu reservations and force shrink before neighbor stealing. Once a CPU is unable to borrow from the global map, it will once steal one elem from a neighbor and after that each time flush this one element to the global list and immediately recycle it. Batch value LOCAL_FREE_TARGET (128) will exhaust a 10K element map with 79 CPUs. CPU 79 will observe this behavior even while its neighbors hold 78 * 127 + 1 * 15 == 9921 free elements (99%). CPUs need not be active concurrently. The issue can appear with affinity migration, e.g., irqbalance. Each CPU can reserve and then hold onto its 128 elements indefinitely. Avoid global list exhaustion by limiting aggregate percpu caches to half of map size, by adjusting LOCAL_FREE_TARGET based on cpu count. This change has no effect on sufficiently large tables. Similar to LOCAL_NR_SCANS and lru->nr_scans, introduce a map variable lru->free_target. The extra field fits in a hole in struct bpf_lru. The cacheline is already warm where read in the hot path. The field is only accessed with the lru lock held. Tested-by: Anton Protopopov Signed-off-by: Willem de Bruijn Acked-by: Stanislav Fomichev Link: https://lore.kernel.org/r/20250618215803.3587312-1-willemdebruijn.kernel@gmail.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin