user/sven/linux.git, branch v6.4.11

Linux 6.4.11

2023-08-16T16:32:31Z

Link: https://lore.kernel.org/r/20230813211724.969019629@linuxfoundation.org Tested-by: Bagas Sanjaya Tested-by: Ronald Warsow Tested-by: Conor Dooley Tested-by: Thierry Reding Tested-by: SeongJae Park Tested-by: Guenter Roeck Tested-by: Salvatore Bonaccorso Tested-by: Justin M. Forbes Tested-by: Ron Economos Tested-by: Shuah Khan Tested-by: Allen Pais Tested-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

alpha: remove __init annotation from exported page_is_ram()

2023-08-16T16:32:31Z

commit 6ccbd7fd474674654019a20177c943359469103a upstream. EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Commit c5a130325f13 ("ACPI/APEI: Add parameter check before error injection") exported page_is_ram(), hence the __init annotation should be removed. This fixes the modpost warning in ARCH=alpha builds: WARNING: modpost: vmlinux: page_is_ram: EXPORT_SYMBOL used for init symbol. Remove __init or EXPORT_SYMBOL. Fixes: c5a130325f13 ("ACPI/APEI: Add parameter check before error injection") Signed-off-by: Masahiro Yamada Reviewed-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman

ACPI: scan: Create platform device for CS35L56

2023-08-16T16:32:31Z

commit 1cd0302be5645420f73090aee26fa787287e1096 upstream. The ACPI device CSC3556 is a Cirrus Logic CS35L56 mono amplifier which is used in multiples, and can be connected either to I2C or SPI. There will be multiple instances under the same Device() node. Add it to ignore_serial_bus_ids and handle it in the serial-multi-instantiate driver. There can be a 5th I2cSerialBusV2, but this is an alias address and doesn't represent a real device. Ignore this by having a dummy 5th entry in the serial-multi-instantiate instance list with the name of a non-existent driver, on the same pattern as done for bsg2150. Signed-off-by: Simon Trimmer Signed-off-by: Richard Fitzgerald Acked-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/20230728111345.7224-1-rf@opensource.cirrus.com Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

platform/x86: serial-multi-instantiate: Auto detect IRQ resource for CSC3551

2023-08-16T16:32:31Z

commit 676b7c5ecab36274442887ceadd6dee8248a244f upstream. The current code assumes that the CSC3551(multiple cs35l41) always have its interrupt pin connected to GPIO thus the IRQ can be acquired with acpi_dev_gpio_irq_get. However on some newer laptop models this is no longer the case as they have the CSC3551's interrupt pin connected to APIC. This causes smi_i2c_probe to fail on these machines. To support these machines, a new macro IRQ_RESOURCE_AUTO was introduced for cs35l41 smi_node, and smi_get_irq function was modified so it tries to get GPIO irq resource first and if failed, tries to get APIC irq resource for cs35l41. This patch affects only the cs35l41's probing and brings no negative influence on machines that indeed have the cs35l41's interrupt pin connected to GPIO. Signed-off-by: David Xu Link: https://lore.kernel.org/r/SY4P282MB18350CD8288687B87FFD2243E037A@SY4P282MB1835.AUSP282.PROD.OUTLOOK.COM Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

platform: mellanox: Fix order in exit flow

2023-08-16T16:32:31Z

commit 8e3938cff0191c810b2abd827313c090fe09d166 upstream. Fix exit flow order: call mlxplat_post_exit() after mlxplat_i2c_main_exit() in order to unregister main i2c driver before to "mlxplat" driver. Fixes: 0170f616f496 ("platform: mellanox: Split initialization procedure") Signed-off-by: Vadim Pasternak Reviewed-by: Michael Shych Link: https://lore.kernel.org/r/20230813083735.39090-2-vadimp@nvidia.com Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask

2023-08-16T16:32:31Z

commit 9f8ccdb5088bd03062d9ad9c0f6abf600cbed8e8 upstream. Use kernel_power_off() instead of kernel_halt() to pass through machine_power_off() -> pm_power_off(), otherwise axillary power does not go off. Change "power down" bitmask. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak Reviewed-by: Michael Shych Link: https://lore.kernel.org/r/20230813083735.39090-4-vadimp@nvidia.com Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

platform: mellanox: mlx-platform: Fix signals polarity and latch mask

2023-08-16T16:32:31Z

commit 3c91d7e8c64f75c63da3565d16d5780320bd5d76 upstream. Change polarity of chassis health and power signals and fix latch reset mask for L1 switch. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak Reviewed-by: Michael Shych Link: https://lore.kernel.org/r/20230813083735.39090-3-vadimp@nvidia.com Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

platform: mellanox: Change register offset addresses

2023-08-16T16:32:31Z

commit d66a8aab7dc36c975bbaa6aa74cf7445878e7c69 upstream. Move debug register offsets to different location due to hardware changes. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak Reviewed-by: Michael Shych Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.com Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman

platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type

2023-08-16T16:32:31Z

commit 2b6aa6610dc9690f79d305ca938abfb799a4f766 upstream. The lenovo-ymc driver is causing the keyboard + touchpad to stop working on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9. The problem is that there are YMC WMI GUID methods in the ACPI tables of these laptops, despite them not being Yogas and lenovo-ymc loading causes libinput to see a SW_TABLET_MODE switch with state 1. This in turn causes libinput to ignore events from the builtin keyboard and touchpad, since it filters those out for a Yoga in tablet mode. Similar issues with false-positive SW_TABLET_MODE=1 reporting have been seen with the intel-hid driver. Copy the intel-hid driver approach to fix this and only bind to the WMI device on machines where the DMI chassis-type indicates the machine is a convertible. Add a 'force' module parameter to allow overriding the chassis-type check so that users can easily test if the YMC interface works on models which report an unexpected chassis-type. Fixes: e82882cdd241 ("platform/x86: Add driver for Yoga Tablet Mode switch") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373 Cc: André Apitzsch Cc: stable@vger.kernel.org Tested-by: Andrew Kallmeyer Tested-by: Gergő Köteles Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman

platform/x86: msi-ec: Fix the build

2023-08-16T16:32:31Z

commit 5a66d59b5ff537ddae84a1f175c3f8eb1140a562 upstream. The msi-ec driver fails to build for me (gcc 7.5): CC [M] drivers/platform/x86/msi-ec.o drivers/platform/x86/msi-ec.c:72:6: error: initializer element is not constant { SM_ECO_NAME, 0xc2 }, ^~~~~~~~~~~ drivers/platform/x86/msi-ec.c:72:6: note: (near initialization for ‘CONF0.shift_mode.modes[0].name’) drivers/platform/x86/msi-ec.c:73:6: error: initializer element is not constant { SM_COMFORT_NAME, 0xc1 }, ^~~~~~~~~~~~~~~ drivers/platform/x86/msi-ec.c:73:6: note: (near initialization for ‘CONF0.shift_mode.modes[1].name’) drivers/platform/x86/msi-ec.c:74:6: error: initializer element is not constant { SM_SPORT_NAME, 0xc0 }, ^~~~~~~~~~~~~ drivers/platform/x86/msi-ec.c:74:6: note: (near initialization for ‘CONF0.shift_mode.modes[2].name’) (...) Don't try to be smart, just use defines for the constant strings. The compiler will recognize it's the same string and will store it only once in the data section anyway. Signed-off-by: Jean Delvare Fixes: 392cacf2aa10 ("platform/x86: Add new msi-ec driver") Cc: stable@vger.kernel.org Cc: Nikita Kravets Cc: Hans de Goede Cc: Mark Gross Link: https://lore.kernel.org/r/20230805101010.54d49e91@endymion.delvare Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman