user/sven/linux.git, branch v6.6.110

Linux 6.6.110

2025-10-06T09:17:00Z

Link: https://lore.kernel.org/r/20251003160331.487313415@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Brett A C Sheffield Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Tested-by: Shuah Khan Tested-by: Peter Schneider Tested-by: Ron Economos Tested-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ASoC: qcom: audioreach: fix potential null pointer dereference

2025-10-06T09:17:00Z

commit 8318e04ab2526b155773313b66a1542476ce1106 upstream. It is possible that the topology parsing function audioreach_widget_load_module_common() could return NULL or an error pointer. Add missing NULL check so that we do not dereference it. Reported-by: Dan Carpenter Cc: Stable@vger.kernel.org Fixes: 36ad9bf1d93d ("ASoC: qdsp6: audioreach: add topology support") Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20250825101247.152619-2-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID

2025-10-06T09:17:00Z

commit 0e2ee70291e64a30fe36960c85294726d34a103e upstream. Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID. ``` Each Unit and Terminal within the video function is assigned a unique identification number, the Unit ID (UID) or Terminal ID (TID), contained in the bUnitID or bTerminalID field of the descriptor. The value 0x00 is reserved for undefined ID, ``` If we add a new entity with id 0 or a duplicated ID, it will be marked as UVC_INVALID_ENTITY_ID. In a previous attempt commit 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID"), we ignored all the invalid units, this broke a lot of non-compatible cameras. Hopefully we are more lucky this time. This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings. In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid. Here is a sample stack trace for one of those cases. [ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd [ 20.830206] usb 1-1: Using ep0 maxpacket: 8 [ 20.833501] usb 1-1: config 0 descriptor?? [ 21.038518] usb 1-1: string descriptor 0 read error: -71 [ 21.038893] usb 1-1: Found UVC 0.00 device (2833:0201) [ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized! [ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized! [ 21.042218] ------------[ cut here ]------------ [ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0 [ 21.043195] Modules linked in: [ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444 [ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 [ 21.044639] Workqueue: usb_hub_wq hub_event [ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0 [ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00 [ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246 [ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1 [ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290 [ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000 [ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003 [ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000 [ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 [ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0 [ 21.051136] PKRU: 55555554 [ 21.051331] Call Trace: [ 21.051480] [ 21.051611] ? __warn+0xc4/0x210 [ 21.051861] ? media_create_pad_link+0x2c4/0x2e0 [ 21.052252] ? report_bug+0x11b/0x1a0 [ 21.052540] ? trace_hardirqs_on+0x31/0x40 [ 21.052901] ? handle_bug+0x3d/0x70 [ 21.053197] ? exc_invalid_op+0x1a/0x50 [ 21.053511] ? asm_exc_invalid_op+0x1a/0x20 [ 21.053924] ? media_create_pad_link+0x91/0x2e0 [ 21.054364] ? media_create_pad_link+0x2c4/0x2e0 [ 21.054834] ? media_create_pad_link+0x91/0x2e0 [ 21.055131] ? _raw_spin_unlock+0x1e/0x40 [ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210 [ 21.055837] uvc_mc_register_entities+0x358/0x400 [ 21.056144] uvc_register_chains+0x1fd/0x290 [ 21.056413] uvc_probe+0x380e/0x3dc0 [ 21.056676] ? __lock_acquire+0x5aa/0x26e0 [ 21.056946] ? find_held_lock+0x33/0xa0 [ 21.057196] ? kernfs_activate+0x70/0x80 [ 21.057533] ? usb_match_dynamic_id+0x1b/0x70 [ 21.057811] ? find_held_lock+0x33/0xa0 [ 21.058047] ? usb_match_dynamic_id+0x55/0x70 [ 21.058330] ? lock_release+0x124/0x260 [ 21.058657] ? usb_match_one_id_intf+0xa2/0x100 [ 21.058997] usb_probe_interface+0x1ba/0x330 [ 21.059399] really_probe+0x1ba/0x4c0 [ 21.059662] __driver_probe_device+0xb2/0x180 [ 21.059944] driver_probe_device+0x5a/0x100 [ 21.060170] __device_attach_driver+0xe9/0x160 [ 21.060427] ? __pfx___device_attach_driver+0x10/0x10 [ 21.060872] bus_for_each_drv+0xa9/0x100 [ 21.061312] __device_attach+0xed/0x190 [ 21.061812] device_initial_probe+0xe/0x20 [ 21.062229] bus_probe_device+0x4d/0xd0 [ 21.062590] device_add+0x308/0x590 [ 21.062912] usb_set_configuration+0x7b6/0xaf0 [ 21.063403] usb_generic_driver_probe+0x36/0x80 [ 21.063714] usb_probe_device+0x7b/0x130 [ 21.063936] really_probe+0x1ba/0x4c0 [ 21.064111] __driver_probe_device+0xb2/0x180 [ 21.064577] driver_probe_device+0x5a/0x100 [ 21.065019] __device_attach_driver+0xe9/0x160 [ 21.065403] ? __pfx___device_attach_driver+0x10/0x10 [ 21.065820] bus_for_each_drv+0xa9/0x100 [ 21.066094] __device_attach+0xed/0x190 [ 21.066535] device_initial_probe+0xe/0x20 [ 21.066992] bus_probe_device+0x4d/0xd0 [ 21.067250] device_add+0x308/0x590 [ 21.067501] usb_new_device+0x347/0x610 [ 21.067817] hub_event+0x156b/0x1e30 [ 21.068060] ? process_scheduled_works+0x48b/0xaf0 [ 21.068337] process_scheduled_works+0x5a3/0xaf0 [ 21.068668] worker_thread+0x3cf/0x560 [ 21.068932] ? kthread+0x109/0x1b0 [ 21.069133] kthread+0x197/0x1b0 [ 21.069343] ? __pfx_worker_thread+0x10/0x10 [ 21.069598] ? __pfx_kthread+0x10/0x10 [ 21.069908] ret_from_fork+0x32/0x40 [ 21.070169] ? __pfx_kthread+0x10/0x10 [ 21.070424] ret_from_fork_asm+0x1a/0x30 [ 21.070737] Reported-by: syzbot+0584f746fde3d52b4675@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0584f746fde3d52b4675 Reported-by: syzbot+dd320d114deb3f5bb79b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=dd320d114deb3f5bb79b Reported-by: Youngjun Lee Fixes: a3fbc2e6bb05 ("media: mc-entity.c: use WARN_ON, validate link pads") Cc: stable@vger.kernel.org Signed-off-by: Thadeu Lima de Souza Cascardo Co-developed-by: Ricardo Ribalda Signed-off-by: Ricardo Ribalda Reviewed-by: Laurent Pinchart Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman

media: rc: fix races with imon_disconnect()

2025-10-06T09:17:00Z

commit fa0f61cc1d828178aa921475a9b786e7fbb65ccb upstream. Syzbot reports a KASAN issue as below: BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline] BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465 CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:317 [inline] print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433 kasan_report+0xb1/0x1e0 mm/kasan/report.c:495 __create_pipe include/linux/usb.h:1945 [inline] send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991 vfs_write+0x2d7/0xdd0 fs/read_write.c:576 ksys_write+0x127/0x250 fs/read_write.c:631 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd The iMON driver improperly releases the usb_device reference in imon_disconnect without coordinating with active users of the device. Specifically, the fields usbdev_intf0 and usbdev_intf1 are not protected by the users counter (ictx->users). During probe, imon_init_intf0 or imon_init_intf1 increments the usb_device reference count depending on the interface. However, during disconnect, usb_put_dev is called unconditionally, regardless of actual usage. As a result, if vfd_write or other operations are still in progress after disconnect, this can lead to a use-after-free of the usb_device pointer. Thread 1 vfd_write Thread 2 imon_disconnect ... if usb_put_dev(ictx->usbdev_intf0) else usb_put_dev(ictx->usbdev_intf1) ... while send_packet if pipe = usb_sndintpipe( ictx->usbdev_intf0) UAF else pipe = usb_sndctrlpipe( ictx->usbdev_intf0, 0) UAF Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by checking ictx->disconnected in all writer paths. Add early return with -ENODEV in send_packet(), vfd_write(), lcd_write() and display_open() if the device is no longer present. Set and read ictx->disconnected under ictx->lock to ensure memory synchronization. Acquire the lock in imon_disconnect() before setting the flag to synchronize with any ongoing operations. Ensure writers exit early and safely after disconnect before the USB core proceeds with cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Reported-by: syzbot+f1a69784f6efe748c3bf@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f1a69784f6efe748c3bf Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver") Cc: stable@vger.kernel.org Signed-off-by: Larshin Sergey Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman

media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove

2025-10-06T09:17:00Z

commit 01e03fb7db419d39e18d6090d4873c1bff103914 upstream. The original code uses cancel_delayed_work() in flexcop_pci_remove(), which does not guarantee that the delayed work item irq_check_work has fully completed if it was already running. This leads to use-after-free scenarios where flexcop_pci_remove() may free the flexcop_device while irq_check_work is still active and attempts to dereference the device. A typical race condition is illustrated below: CPU 0 (remove) | CPU 1 (delayed work callback) flexcop_pci_remove() | flexcop_pci_irq_check_work() cancel_delayed_work() | flexcop_device_kfree(fc_pci->fc_dev) | | fc = fc_pci->fc_dev; // UAF This is confirmed by a KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff8880093aa8c8 by task bash/135 ... Call Trace: dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 ... Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 __kmalloc_noprof+0x1be/0x460 flexcop_device_kmalloc+0x54/0xe0 flexcop_pci_probe+0x1f/0x9d0 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30 Freed by task 135: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 flexcop_device_kfree+0x32/0x50 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work has finished before the device memory is deallocated. This bug was initially identified through static analysis. To reproduce and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced artificial delays within the flexcop_pci_irq_check_work() function to increase the likelihood of triggering the bug. Fixes: 382c5546d618 ("V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards") Cc: stable@vger.kernel.org Signed-off-by: Duoming Zhou Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman

scsi: target: target_core_configfs: Add length check to avoid buffer overflow

2025-10-06T09:17:00Z

commit 27e06650a5eafe832a90fd2604f0c5e920857fae upstream. A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes). snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes. Since snprintf() returns the total number of bytes that would have been written (the length of %s/%sn ), this value may exceed the buffer length (256 bytes) passed to memcpy(), this will ultimately cause function memcpy reporting a buffer overflow error. An additional check of the return value of snprintf() can avoid this buffer overflow. Reported-by: Wang Haoran Reported-by: ziiiro Signed-off-by: Wang Haoran Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

gcc-plugins: Remove TODO_verify_il for GCC >= 16

2025-10-06T09:16:59Z

commit a40282dd3c484e6c882e93f4680e0a3ef3814453 upstream. GCC now runs TODO_verify_il automatically[1], so it is no longer exposed to plugins. Only use the flag on GCC < 16. Link: https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=9739ae9384dd7cd3bb1c7683d6b80b7a9116eaf8 [1] Suggested-by: Christopher Fore Link: https://lore.kernel.org/r/20250920234519.work.915-kees@kernel.org Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman

crypto: sha256 - fix crash at kexec

2025-10-06T09:16:59Z

Loading a large (~2.1G) files with kexec crashes the host with when running: # kexec --load kernel --initrd initrd_with_2G_or_more UBSAN: signed-integer-overflow in ./include/crypto/sha256_base.h:64:19 34152083 * 64 cannot be represented in type 'int' ... BUG: unable to handle page fault for address: ff9fffff83b624c0 sha256_update (lib/crypto/sha256.c:137) crypto_sha256_update (crypto/sha256_generic.c:40) kexec_calculate_store_digests (kernel/kexec_file.c:769) __se_sys_kexec_file_load (kernel/kexec_file.c:397 kernel/kexec_file.c:332) ... (Line numbers based on commit da274362a7bd9 ("Linux 6.12.49") This started happening after commit f4da7afe07523f ("kexec_file: increase maximum file size to 4G") that landed in v6.0, which increased the file size for kexec. This is not happening upstream (v6.16+), given that `block` type was upgraded from "int" to "size_t" in commit 74a43a2cf5e8 ("crypto: lib/sha256 - Move partial block handling out") Upgrade the block type similar to the commit above, avoiding hitting the overflow. This patch is only suitable for the stable tree, and before 6.16, which got commit 74a43a2cf5e8 ("crypto: lib/sha256 - Move partial block handling out"). This is not required before f4da7afe07523f ("kexec_file: increase maximum file size to 4G"). In other words, this fix is required between versions v6.0 and v6.16. Signed-off-by: Breno Leitao Fixes: f4da7afe07523f ("kexec_file: increase maximum file size to 4G") # Before v6.16 Reported-by: Michael van der Westhuizen Reported-by: Tobias Fleig Reviewed-by: Eric Biggers Signed-off-by: Greg Kroah-Hartman

Linux 6.6.109

2025-10-02T11:42:57Z

Link: https://lore.kernel.org/r/20250930143821.118938523@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Brett A C Sheffield Tested-by: Peter Schneider Tested-by: Ron Economos Tested-by: Jon Hunter Tested-by: Mark Brown Tested-by: Linux Kernel Functional Testing Tested-by: Shuah Khan Tested-by: Miguel Ojeda Signed-off-by: Greg Kroah-Hartman

drm/i915/backlight: Return immediately when scale() finds invalid parameters

2025-10-02T11:42:56Z

commit 6f71507415841d1a6d38118e5fa0eaf0caab9c17 upstream. The scale() functions detects invalid parameters, but continues its calculations anyway. This causes bad results if negative values are used for unsigned operations. Worst case, a division by 0 error will be seen if source_min == source_max. On top of that, after v6.13, the sequence of WARN_ON() followed by clamp() may result in a build error with gcc 13.x. drivers/gpu/drm/i915/display/intel_backlight.c: In function 'scale': include/linux/compiler_types.h:542:45: error: call to '__compiletime_assert_415' declared with attribute error: clamp() low limit source_min greater than high limit source_max This happens if the compiler decides to rearrange the code as follows. if (source_min > source_max) { WARN(..); /* Do the clamp() knowing that source_min > source_max */ source_val = clamp(source_val, source_min, source_max); } else { /* Do the clamp knowing that source_min <= source_max */ source_val = clamp(source_val, source_min, source_max); } Fix the problem by evaluating the return values from WARN_ON and returning immediately after a warning. While at it, fix divide by zero error seen if source_min == source_max. Analyzed-by: Linus Torvalds Suggested-by: Linus Torvalds Suggested-by: David Laight Cc: David Laight Cc: Jani Nikula Cc: Andy Shevchenko Signed-off-by: Guenter Roeck Reviewed-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20250121145203.2851237-1-linux@roeck-us.net Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman