user/sven/linux.git/Documentation/devicetree, branch v5.4.38

arm64: tegra: Fix Tegra194 PCIe compatible string

2020-04-23T08:36:30Z

[ Upstream commit f9f711efd441ad0d22874be49986d92121862335 ] If the kernel configuration option CONFIG_PCIE_DW_PLAT_HOST is enabled then this can cause the kernel to incorrectly probe the generic designware PCIe platform driver instead of the Tegra194 designware PCIe driver. This causes a boot failure on Tegra194 because the necessary configuration to access the hardware is not performed. The order in which the compatible strings are populated in Device-Tree is not relevant in this case, because the kernel will attempt to probe the device as soon as a driver is loaded and if the generic designware PCIe driver is loaded first, then this driver will be probed first. Therefore, to fix this problem, remove the "snps,dw-pcie" string from the compatible string as we never want this driver to be probe on Tegra194. Fixes: 2602c32f15e7 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT") Signed-off-by: Jon Hunter Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

dt-bindings: net: FMan erratum A050385

2020-04-01T09:01:52Z

[ Upstream commit 26d5bb9e4c4b541c475751e015072eb2cbf70d15 ] FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak; thus stopping further packet processing. The FMAN internal queue can overflow when FMAN splits single read or write transactions into multiple smaller transactions such that more than 17 AXI transactions are in flight from FMAN to interconnect. When the FMAN internal queue overflows, it can stall further packet processing. The issue can occur with any one of the following three conditions: 1. FMAN AXI transaction crosses 4K address boundary (Errata A010022) 2. FMAN DMA address for an AXI transaction is not 16 byte aligned, i.e. the last 4 bits of an address are non-zero 3. Scatter Gather (SG) frames have more than one SG buffer in the SG list and any one of the buffers, except the last buffer in the SG list has data size that is not a multiple of 16 bytes, i.e., other than 16, 32, 48, 64, etc. With any one of the above three conditions present, there is likelihood of stalled FMAN packet processing, especially under stress with multiple ports injecting line-rate traffic. To avoid situations that stall FMAN packet processing, all of the above three conditions must be avoided; therefore, configure the system with the following rules: 1. Frame buffers must not span a 4KB address boundary, unless the frame start address is 256 byte aligned 2. All FMAN DMA start addresses (for example, BMAN buffer address, FD[address] + FD[offset]) are 16B aligned 3. SG table and buffer addresses are 16B aligned and the size of SG buffers are multiple of 16 bytes, except for the last SG buffer that can be of any size. Additional workaround notes: - Address alignment of 64 bytes is recommended for maximally efficient system bus transactions (although 16 byte alignment is sufficient to avoid the stall condition) - To support frame sizes that are larger than 4K bytes, there are two options: 1. Large single buffer frames that span a 4KB page boundary can be converted into SG frames to avoid transaction splits at the 4KB boundary, 2. Align the large single buffer to 256B address boundaries, ensure that the frame address plus offset is 256B aligned. - If software generated SG frames have buffers that are unaligned and with random non-multiple of 16 byte lengths, before transmitting such frames via FMAN, frames will need to be copied into a new single buffer or multiple buffer SG frame that is compliant with the three rules listed above. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

dt-bindings: iio: adc: ad7606: Fix wrong maxItems value

2020-02-14T21:34:19Z

commit a6c4f77cb3b11f81077b53c4a38f21b92d41f21e upstream. This patch set the correct value for oversampling maxItems. In the original example, appears 3 items for oversampling while the maxItems is set to 1, this patch fixes those issues. Fixes: 416f882c3b40 ("dt-bindings: iio: adc: Migrate AD7606 documentation to yaml") Signed-off-by: Beniamin Bia Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

hwrng: omap3-rom - Fix missing clock by probing with device tree

2020-01-26T09:01:03Z

[ Upstream commit 0c0ef9ea6f3f0d5979dc7b094b0a184c1a94716b ] Commit 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases") removed old omap3 clock framework aliases but caused omap3-rom-rng to stop working with clock not found error. Based on discussions on the mailing list it was requested by Tero Kristo that it would be best to fix this issue by probing omap3-rom-rng using device tree to provide a proper clk property. The other option would be to add back the missing clock alias, but that does not help moving things forward with removing old legacy platform_data. Let's also add a proper device tree binding and keep it together with the fix. Cc: devicetree@vger.kernel.org Cc: Aaro Koskinen Cc: Adam Ford Cc: Pali Rohár Cc: Rob Herring Cc: Sebastian Reichel Cc: Tero Kristo Fixes: 0ed266d7ae5e ("clk: ti: omap3: cleanup unnecessary clock aliases") Reported-by: Aaro Koskinen Signed-off-by: Tony Lindgren Acked-by: Rob Herring Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

dt-bindings: Add missing 'properties' keyword enclosing 'snps,tso'

2020-01-23T07:22:54Z

commit dbce0b65046d1735d7054c54ec2387dba84ba258 upstream. DT property definitions must be under a 'properties' keyword. This was missing for 'snps,tso' in an if/then clause. A meta-schema fix will catch future errors like this. Fixes: 7db3545aef5f ("dt-bindings: net: stmmac: Convert the binding to a schemas") Cc: "David S. Miller" Acked-by: Maxime Ripard Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

ASoC: dt-bindings: mt8183: add missing update

2020-01-17T18:48:33Z

commit 7cf2804775f8a388411624b3e768e55d08711e9d upstream. Headset codec is optional. Add missing update to DT binding document. Fixes: a962a809e5e4 ("ASoC: mediatek: mt8183: make headset codec optional") Signed-off-by: Tzung-Bi Shih Link: https://lore.kernel.org/r/20190920112320.166052-1-tzungbi@google.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

dt-bindings: reset: Fix brcmstb-reset example

2020-01-17T18:48:29Z

commit 392a9f63058f2cdcec8363b849a25532ee40da9f upstream. The reset controller has a #reset-cells value of 1, so we should see a phandle plus a register identifier, fix the example. Fixes: 0807caf647dd ("dt-bindings: reset: Add document for Broadcom STB reset controller") Signed-off-by: Florian Fainelli Signed-off-by: Philipp Zabel Signed-off-by: Greg Kroah-Hartman

dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example

2020-01-09T09:20:05Z

commit 830dbce7c76ea529decac7d23b808c1e7da3d891 upstream. The documented compatible value for R-Car H3 is "renesas,r8a7795-rcar-usb2-clock-sel", not "renesas,r8a77950-rcar-usb2-clock-sel". Fixes: 311accb64570db45 ("clk: renesas: rcar-usb2-clock-sel: Add R-Car USB 2.0 clock selector PHY") Signed-off-by: Geert Uytterhoeven Reviewed-by: Yoshihiro Shimoda Acked-by: Rob Herring Link: https://lore.kernel.org/r/20191016145650.30003-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman

dt-bindings: Improve validation build error handling

2020-01-04T18:18:11Z

[ Upstream commit 93512dad334deb444619505f1fbb761156f7471b ] Schema errors can cause make to exit before useful information is printed. This leaves developers wondering what's wrong. It can be overcome passing '-k' to make, but that's not an obvious solution. There's 2 scenarios where this happens. When using DT_SCHEMA_FILES to validate with a single schema, any error in the schema results in processed-schema.yaml being empty causing a make error. The result is the specific errors in the schema are never shown because processed-schema.yaml is the first target built. Simply making processed-schema.yaml last in extra-y ensures the full schema validation with detailed error messages happen first. The 2nd problem is while schema errors are ignored for processed-schema.yaml, full validation of the schema still runs in parallel and any schema validation errors will still stop the build when running validation of dts files. The fix is to not add the schema examples to extra-y in this case. This means 'dtbs_check' is no longer a superset of 'dt_binding_check'. Update the documentation to make this clear. Cc: Masahiro Yamada Tested-by: Jeffrey Hugo Signed-off-by: Rob Herring Signed-off-by: Sasha Levin

ath10k: Fix HOST capability QMI incompatibility

2019-11-29T09:09:41Z

commit 7165ef890a4c44cf16db66b82fd78448f4bde6ba upstream. The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI message") served the purpose of supporting the new and extended HOST capability QMI message. But while the new message adds a slew of optional members it changes the data type of the "daemon_support" member, which means that older versions of the firmware will fail to decode the incoming request message. There is no way to detect this breakage from Linux and there's no way to recover from sending the wrong message (i.e. we can't just try one format and then fallback to the other), so a quirk is introduced in DeviceTree to indicate to the driver that the firmware requires the 8bit version of this message. Cc: stable@vger.kernel.org Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") Signed-off-by: Bjorn Andersson Acked-by: Rob Herring Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman