user/sven/linux.git/Documentation, branch v5.9.8

bindings: soc: ti: soc: ringacc: remove ti,dma-ring-reset-quirk

2020-11-05T10:51:30Z

[ Upstream commit aee123f48f387ea62002cddb46c7cb04c96628df ] Remove "ti,dma-ring-reset-quirk" DT property as proper w/a handling is implemented now in Ringacc driver using SoC info. Signed-off-by: Grygorii Strashko Signed-off-by: Santosh Shilimkar Signed-off-by: Sasha Levin

media: videodev2.h: RGB BT2020 and HSV are always full range

2020-11-05T10:51:18Z

[ Upstream commit b305dfe2e93434b12d438434461b709641f62af4 ] The default RGB quantization range for BT.2020 is full range (just as for all the other RGB pixel encodings), not limited range. Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation accordingly. Also mention that HSV is always full range and cannot be limited range. When RGB BT2020 was introduced in V4L2 it was not clear whether it should be limited or full range, but full range is the right (and consistent) choice. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

xen/events: defer eoi in case of excessive number of events

2020-11-05T10:51:08Z

commit e99502f76271d6bc4e374fe368c50c67a1fd3070 upstream. In case rogue guests are sending events at high frequency it might happen that xen_evtchn_do_upcall() won't stop processing events in dom0. As this is done in irq handling a crash might be the result. In order to avoid that, delay further inter-domain events after some time in xen_evtchn_do_upcall() by forcing eoi processing into a worker on the same cpu, thus inhibiting new events coming in. The time after which eoi processing is to be delayed is configurable via a new module parameter "event_loop_timeout" which specifies the maximum event loop time in jiffies (default: 2, the value was chosen after some tests showing that a value of 2 was the lowest with an only slight drop of dom0 network throughput while multiple guests performed an event storm). How long eoi processing will be delayed can be specified via another parameter "event_eoi_delay" (again in jiffies, default 10, again the value was chosen after testing with different delay values). This is part of XSA-332. Cc: stable@vger.kernel.org Reported-by: Julien Grall Signed-off-by: Juergen Gross Reviewed-by: Stefano Stabellini Reviewed-by: Wei Liu Signed-off-by: Greg Kroah-Hartman

dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset

2020-10-29T09:12:03Z

[ Upstream commit 884d1a334ae8130fabede56f59b224619ad6bca4 ] When adding allwinner,sun8i-a33-crypto, I forgot to add that it needs reset. Furthermore, there are no need to use items to list only one compatible in compatible list. Fixes: f81547ba7a98 ("dt-bindings: crypto: add new compatible for A33 SS") Signed-off-by: Corentin Labbe Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20200907175437.4464-1-clabbe.montjoie@gmail.com Signed-off-by: Sasha Levin

x86/fpu: Allow multiple bits in clearcpuid= parameter

2020-10-29T09:11:00Z

[ Upstream commit 0a4bb5e5507a585532cc413125b921c8546fc39f ] Commit 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument") changed clearcpuid parsing from __setup() to cmdline_find_option(). While the __setup() function would have been called for each clearcpuid= parameter on the command line, cmdline_find_option() will only return the last one, so the change effectively made it impossible to disable more than one bit. Allow a comma-separated list of bit numbers as the argument for clearcpuid to allow multiple bits to be disabled again. Log the bits being disabled for informational purposes. Also fix the check on the return value of cmdline_find_option(). It returns -1 when the option is not found, so testing as a boolean is incorrect. Fixes: 0c2a3913d6f5 ("x86/fpu: Parse clearcpuid= as early XSAVE argument") Signed-off-by: Arvind Sankar Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200907213919.2423441-1-nivedita@alum.mit.edu Signed-off-by: Sasha Levin

netsec: ignore 'phy-mode' device property on ACPI systems

2020-10-29T09:10:55Z

[ Upstream commit acd7aaf51b20263a7e62d2a26569988c63bdd3d8 ] Since commit bbc4d71d63549bc ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the Realtek PHY driver will override any TX/RX delay set by hardware straps if the phy-mode device property does not match. This is causing problems on SynQuacer based platforms (the only SoC that incorporates the netsec hardware), since many were built with this Realtek PHY, and shipped with firmware that defines the phy-mode as 'rgmii', even though the PHY is configured for TX and RX delay using pull-ups. >From the driver's perspective, we should not make any assumptions in the general case that the PHY hardware does not require any initial configuration. However, the situation is slightly different for ACPI boot, since it implies rich firmware with AML abstractions to handle hardware details that are not exposed to the OS. So in the ACPI case, it is reasonable to assume that the PHY comes up in the right mode, regardless of whether the mode is set by straps, by boot time firmware or by AML executed by the ACPI interpreter. So let's ignore the 'phy-mode' device property when probing the netsec driver in ACPI mode, and hardcode the mode to PHY_INTERFACE_MODE_NA, which should work with any PHY provided that it is configured by the time the driver attaches to it. While at it, document that omitting the mode is permitted for DT probing as well, by setting the phy-mode DT property to the empty string. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Ard Biesheuvel Reviewed-by: Ilias Apalodimas Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20201018163625.2392-1-ardb@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

icmp: randomize the global rate limiter

2020-10-29T09:10:54Z

[ Upstream commit b38e7819cae946e2edf869e604af1e65a5d241c5 ] Keyu Man reported that the ICMP rate limiter could be used by attackers to get useful signal. Details will be provided in an upcoming academic publication. Our solution is to add some noise, so that the attackers no longer can get help from the predictable token bucket limiter. Fixes: 4cdf507d5452 ("icmp: add a global rate limitation") Signed-off-by: Eric Dumazet Reported-by: Keyu Man Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

Merge tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-10-11T17:53:37Z

Pull x86 fixes from Ingo Molnar: "Two fixes: - Fix a (hopefully final) IRQ state tracking bug vs MCE handling - Fix a documentation link" * tag 'x86-urgent-2020-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Fix incorrect references to zero-page.txt x86/mce: Use idtentry_nmi_enter/exit()

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-10-05T18:27:14Z

Pull networking fixes from David Miller: 1) Make sure SKB control block is in the proper state during IPSEC ESP-in-TCP encapsulation. From Sabrina Dubroca. 2) Various kinds of attributes were not being cloned properly when we build new xfrm_state objects from existing ones. Fix from Antony Antony. 3) Make sure to keep BTF sections, from Tony Ambardar. 4) TX DMA channels need proper locking in lantiq driver, from Hauke Mehrtens. 5) Honour route MTU during forwarding, always. From Maciej Żenczykowski. 6) Fix races in kTLS which can result in crashes, from Rohit Maheshwari. 7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan Jha. 8) Use correct address family in xfrm state lookups, from Herbert Xu. 9) A bridge FDB flush should not clear out user managed fdb entries with the ext_learn flag set, from Nikolay Aleksandrov. 10) Fix nested locking of netdev address lists, from Taehee Yoo. 11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau. 12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit. 13) Don't free command entries in mlx5 while comp handler could still be running, from Eran Ben Elisha. 14) Error flow of request_irq() in mlx5 is busted, due to an off by one we try to free and IRQ never allocated. From Maor Gottlieb. 15) Fix leak when dumping netlink policies, from Johannes Berg. 16) Sendpage cannot be performed when a page is a slab page, or the page count is < 1. Some subsystems such as nvme were doing so. Create a "sendpage_ok()" helper and use it as needed, from Coly Li. 17) Don't leak request socket when using syncookes with mptcp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net/core: check length before updating Ethertype in skb_mpls_{push,pop} net: mvneta: fix double free of txq->buf net_sched: check error pointer in tcf_dump_walker() net: team: fix memory leak in __team_options_register net: typhoon: Fix a typo Typoon --> Typhoon net: hinic: fix DEVLINK build errors net: stmmac: Modify configuration method of EEE timers tcp: fix syn cookied MPTCP request socket leak libceph: use sendpage_ok() in ceph_tcp_sendpage() scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map() drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage() tcp: use sendpage_ok() to detect misused .sendpage nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage() net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send net: introduce helper sendpage_ok() in include/linux/net.h net: usb: pegasus: Proper error handing when setting pegasus' MAC address net: core: document two new elements of struct net_device netlink: fix policy dump leak net/mlx5e: Fix race condition on nhe->n pointer in neigh update net/mlx5e: Fix VLAN create flow ...

Documentation/x86: Fix incorrect references to zero-page.txt

2020-10-02T20:49:29Z

The file zero-page.txt does not exit. Add links to zero-page.rst instead. [ bp: Massage a bit. ] Signed-off-by: Heinrich Schuchardt Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20201002190623.7489-1-xypron.glpk@gmx.de